Тёмный

Adam Savage Gets Nervous Using These Tools 

Adam Savage’s Tested
Подписаться 7 млн
Просмотров 224 тыс.
50% 1

What are the various saws (table saw, band saw, chop saw, circular saw, and the like) used for besides the obvious? Has Adam Savage ever struggled with anxiety around scary tools? Adam answers these questions from Tested members Vickie Bligh and David Marden, whom we thank for their support and questions! Join this channel to support Tested and get access to perks, like asking Adam questions:
/ @tested
$40 Gyokucho Japanese Hand Saw: amzn.to/2RaypAw
Dewalt Portable Band Saw: amzn.to/49MvG3C
Disclaimer: Tested may earn an affiliate commission when you buy through the links here.
Adam Savage's Favorite Tools: Japanese Hand Saws: • Adam Savage's Favorite...
Subscribe for more videos (and click the bell for notifications): ru-vid.com_c...
Tested and Adam Savage Ts, stickers, (de) merit badges and more: tested-store.com
About Tested: www.tested.com/about
TikTok: / testedcom
Instagram: / testedcom
Twitter: / testedcom
Facebook: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Intro bumper by Abe Dieckman
Thanks for watching!

Наука

Опубликовано:

 

9 мар 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 748   
@tested
@tested 3 месяца назад
Join this channel to support Tested and get access to perks, like asking Adam questions: ru-vid.com/show-UCiDJtJKMICpb9B1qf7qjEOAjoin $40 Gyokucho Japanese Hand Saw: amzn.to/2RaypAw Dewalt Portable Band Saw: amzn.to/49MvG3C Disclaimer: Tested may earn an affiliate commission when you buy through the links here. Adam Savage's Favorite Tools: Japanese Hand Saws: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-F5YmVHB3P5I.html
@nocturnalnomad2757
@nocturnalnomad2757 3 месяца назад
Love the portable bandsaw. I would recommend Harbor Freights portable bandsaw chopsaw/stand by Hercules.
@mushroom032
@mushroom032 3 месяца назад
Well, Did you? Did you use the portable bandsaw to make a sandwich? 😅
@dalebob9364
@dalebob9364 3 месяца назад
Really interesting to pick a body dismemberment battery powered tool as your favorite Explains why he needed the bigger one?!?😂
@caseysmith544
@caseysmith544 2 месяца назад
Nice fact is now Contractor table saws exist becuse more and more companies people know this is how 99% of work will be done is using a saw in a place where electricity is found or in a Solar generator and needs to be easily moved on a site. However, using portable Battery table saws are a bad Idea as they run though batteries burning them out or are slow.
@jordonvh91
@jordonvh91 3 месяца назад
A healthy fear and respect for any powered tool, no matter the size, is never a bad thing to have.
@harbl99
@harbl99 3 месяца назад
Our shop (as the Americans say) teacher drummed into us that every bandsaw was a beast patiently waiting to take human limbs. As a class we were more scared of it than we were of the gas-powered forge. Rotary cutting wheels have taken its place in the pantheon in these latter days.
@KevinBrown-lv2fk
@KevinBrown-lv2fk 3 месяца назад
i bought a plug in grinder to chop up some steel beam i had in my garden and after trying it for 3 seconds it put the fear of god into me and ive neveer touched it since
@why6212
@why6212 3 месяца назад
So far I've hurt myself the worst with the most mundane of power tools. Be extra careful with the ones you don't think will hurt you.
@WHJeffB
@WHJeffB 3 месяца назад
Absolutely... My late father was a contractor/carpenter for over 50yrs. When he passed away, he did so with all ten fingers intact. Growing up, I was allowed to use the woodworking tools in his shop (except the joiner) once he showed me how to use them. He ALWAYS stressed how import it was to pay attention and respect the tools for what they could do to you if you didn't. Have known many guys over the years that were missing fingers, parts of fingers or terribly disfigured finger tips from not following that simple bit of advice. Whenever I use my tools, be it metal working or woodworking, I always pay very close attention to where my fingers/hands are before I start doing whatever it is I'm going to do.
@natec599
@natec599 3 месяца назад
@@KevinBrown-lv2fkI have 8-10 corded and cordless grinders, use them all the time. Every time I pick one up I think is this the time it does serious damage, because I am still a bit afraid of them. while I’m working I’m focused on the task at hand and don’t worry, the key is to take control of the tool, if you dont, the tool will and it will eat you up!
@brentcrobarger7872
@brentcrobarger7872 3 месяца назад
Carpenter of a decade+ here: I'm glad to hear someone admit that operating the table saw (and other tools in general) is terrifying. I have never once powered one up and not thought to myself, "How could I lose a finger." A common joke in the industry when asked how long you've been a woodworker, " [X number of years], and I've still got all 9 fingers, and the working spare."
@stephenlamley541
@stephenlamley541 3 месяца назад
It was a chainsaw for me not terror but definitely fear.
@spvillano
@spvillano 3 месяца назад
I've never feared my tools, I do however respect their power and capabilities. For the simple truth is, the tool will never cause me harm, *I* will cause myself harm by carelessness, inattention and shoddy practices with that tool. Hence, my first, second, third and final questions are always, "how can I do this safer?".
@othertonywi1son
@othertonywi1son 3 месяца назад
My grandpa and two uncles have had their pinkies amputated due to Dupuytren's disease, which is where nodules form on the ligaments in the hand and make the fingers in a hooked shape. It was easier for them to have the fingers removed so they can still use the rest of the hand when working in the shop. Since it is genetic I will probably have to deal with that at some point, but I am sure medical advancements will be better when that time comes. I often joke that my pinkies are spares or a table saw buffer, much to the horror of my mother.
@dragonwing4ever
@dragonwing4ever 3 месяца назад
​@@stephenlamley541definitely wary of my chainsaw too, if i can avoid using it i will
@georgedennison3338
@georgedennison3338 3 месяца назад
It's funny, I've been using worm drive Skil saws, tables, metal sheers, radial arms saws, you name it since my teens & at 70 still do. I respect them, don't fear them & seldom think about the mayhem they can cause to human flesh, but EVERY damn time I see or pick up a pair of limb loppers, I get this visceral image, almost a feeling of getting a finger lopped off. If there was every a case for believing in past life memories, this would be one. Never told a single person about this; just too strange to admit, given what I do & have done for half a century.
@ThePrplBear
@ThePrplBear 3 месяца назад
The 2 things in my dad's shop that he always had a healthy respect for were the table saw and the band saw. His table saw, which I still have, is very old and built like a tank, but built with very little in terms of safety in mind. Not like the ones today. The band saw he said was always to be respected because it was developed by butchers, and what do butchers cut? Meat and bone. Guess what you're made of. He said to me that these are things you should always respect because the day you don't is the day you get hurt. He had all 10 fingers until the day he died, and I think that is down to his healthy fear of the things he worked with daily. I try to carry that forward with me even though I'm working in IT. The tools are powerful and you should respect them or they will show you no mercy.
@evanjeffrey9677
@evanjeffrey9677 2 месяца назад
Just a note: I love using old tools, but please, please add a riving knife / splitter to your dad's table saw if you are using it. You can DIY it from scraps if needed. Obviously a full-on-blade guard is best if you can fit one, but at least add a splitter. After all, you can (at least in theory) plan every cut and make sure you never feed your fingers through the blade in a "controlled" cut. But as long as you are cutting wood, its a natural material and you never know whats inside or what it's going to do. A board that has internal stress and pinches on the back of a table saw blade can cause a kickback and no level of care can prevent it. The kickback makes a projectile that can put a whole in the wall or you, and even if it doesn't you never know how you will react in a surprise situation like that.
@gingeralebean5375
@gingeralebean5375 2 месяца назад
I loved reading this comment! I’m currently training to be a butcher at a small store with only 2 other butchers. Our saw was built in the 1950’s and still runs like new, but safety clearly wasn’t the top priority when it was being designed. Long story short: it’s very strange to use a saw everyday, that you know has already taken a life before. Some poor guy decided to ram his whole head into the saw because he couldn’t handle the stress of his divorce. Now I’m standing in his spot where his head used to be, running roughly 200-500lbs of pork through it everyday. It’s very terrifying, but it taught me to respect the equipment very quickly.
@tacticalskiffs8134
@tacticalskiffs8134 2 месяца назад
Respect is a good attitude. Fear is not. Riding a table saw is a lot less dangerous than riding a bicycle, and I am a happy cyclist, at least up to drivers always being on their phones. We don't have good data on saw dangers. The numbers include people who work with saws 9-5, may be intoxicated, low IQ, etc... Cutting one's fingers off is always a choice we make. Just don't expose your digits to the blade. Never do anything that can cause your fingers to arrive in the spinning blade. It isn't rocket science.
@chuckschillingvideos
@chuckschillingvideos 2 месяца назад
The safety in table saw use is the OPERATOR of the table saw. If used properly, the table is no more dangerous than any other power tool, and in many cases safer.
@dickjohnson9582
@dickjohnson9582 2 месяца назад
​@@tacticalskiffs8134it's not that people put their hand into the blade. usually its kick back where the blade violently shoots the workpiece out if it gets crooked and then wedged into the fence. It has serious force and can push your hand into the blade. The piece can shoot through drywall that's how powerful it is.
@goredzilla
@goredzilla 3 месяца назад
When I was doing sets for Chronicles of Riddick, one guy had a serious accident in the table saw (cut a 45 degree saw angle and did it backwards) Luckily we had another guy that was trained and had a bunch of high end papers over decades in carpentry from the UK and did a free table saw safety course after the accident, there must have been 60 men and women there. The safety tricks and knowledge that was shared was mind blowing. Always ask yourself before cutting "is this right?"
@balsalmalberto8086
@balsalmalberto8086 2 месяца назад
In college I didn't see cutting accidents but there was "this guy" (definitely not me) had a table saw fling (kickback?) wood right into their thigh just a few inches of their jewelies.
@tacticalskiffs8134
@tacticalskiffs8134 2 месяца назад
I hate the EU, but they have mandated safe saws, and by the way, will not certify Sawstop, the saw more than the technology. I follow the european standards, or at least, understand them. The more popular american saws are based off a dangerous design from the 1930s, that has since been "upgraded" with improvements that to some extent make it more dangerous still. I have a book on safe powertool use from a British source, and it is a very useful book. Another thing I keep in mind, is Ashley Illes' observation that he never met a pattern maker who had lost a finger. Yet in many respects they are a lot deeper into the weeds than the average woodworker as patterns can involve large wood structures, and deep cuts. He put it down to never using a saw without push sticks. That simple. And he was talking about an earlier era, pre-EU, and when the saws were primitive.
@bamberlamb6512
@bamberlamb6512 2 месяца назад
@@tacticalskiffs8134 Just out of curiosity why do you hate the EU?
@bikerfirefarter7280
@bikerfirefarter7280 2 месяца назад
Asking 'is this right?' is one thing, but another is whether you can answer/understand both the question and an answer. I've seen countless accidents that have arisen from people being clueless about the forces and processes involved, yet going ahead because 'I've seen someone else do it'. Or they assume they understand yet are oblivious. e.g. The owner of a vehicle repair business using a borowed very blunt chainsaw to back-cut diagonally through a large timber joist, above their heads, while standing on a ladder, over a pile of scrap metal; the chain/timber was smoking. 4 people watching and not one aware of anything wrong about it. What can you do with such people?
@johnleonard5857
@johnleonard5857 3 месяца назад
Excellent advise for treating and using a table saw. When using my table saw I always plan my movements prior to cutting. I do have a SawStop but I treat that as a safety net not an excuse.
@pete_lind
@pete_lind 3 месяца назад
Table saw is great , if you need cut sheet material all the time , but in small shop guide rail , with jigsaw is safer option , if you cut big sheet material rarely. Dado blades are not banned in Europe , you can buy those , but European table saws that have electric brake are build so you cant attach a Dado blade , for one reason Dado blade can unscrew itself , then it can fly off the table saw . Big table routers have wheels that drag the material past blade, that is big lump of metal spinning 30 000 rpm .
@mm9773
@mm9773 3 месяца назад
Well, you’re doing it right, Adam isn’t: there’s no excuse for running a table saw without a riving knife in front of six million viewers.
@semilog643
@semilog643 3 месяца назад
This is the way.
@johnleonard5857
@johnleonard5857 3 месяца назад
@@semilog643 this is the way.
@lamegame420
@lamegame420 2 месяца назад
. Table saws aren't particularly dangerous because they have a spinning blade. It's the fact that you pinned your work between that blade and a fence. That fancy touch lamp installed on your saw isn't going to stop a kickback. But it may leave you spending half your day repairing a saw, and destroy a $250 piece of live edge walnut because of a few rogue raindrops, though. And to think, I spent $1000 on a saw to have that "feature"
@Cruiserfrank
@Cruiserfrank 2 месяца назад
My late father the maker (he was an auto mechanic but built houses as well as cars and everything in between). He said "You don't Have to be afraid of a tool, but Always assume the tool will turn around and bite you. Then use the tool but be aware that you have to keep it from biting you." That is just what Adam says. Thanks, Adam! You gave me a good memory.
@severeign2987
@severeign2987 3 месяца назад
Don’t fear the tool so much that you’re afraid to use it, but fear the tool enough to give it the respect and preparation necessary to be able to use it safely and to its potential. As I told my daughter when teaching her to drive ‘When things start to feel easy is when you need to mentally check yourself because complacency in dangerous situations can easily lead to accidents’.
@strescicca
@strescicca 3 месяца назад
i dont know if Adam reads these comments, but i want to say i was the girl at comicon today, sunday, that had the Tom Servo puppet and started the convo by saying "sup nerd!" when i wanted to say "sup fellow nerd" but i got over excited and blurted the wrong thing. i want to make sure i clarified i meant it as a most sincere compliment and would never insult you. It was a great pleasure to meet him and will cherish it for the rest of my life and now have a story to tell my friends
@VAXHeadroom
@VAXHeadroom 3 месяца назад
I've never met Adam and wanted you to know HOW JEALOUS I AM! :)
@Dudeguymansir
@Dudeguymansir 2 месяца назад
Sup nerd! This is a funny, sincere, vulnerable, and heartfelt comment! Delightfully and relatably painful ❤🎉😂
@EDentzo
@EDentzo 2 месяца назад
Haha.. if i was Adam i would have laughed. Thats a really funny way saying hi to your idol 😂 And im sure he wouldn’t be offended.. he knows he’s a nerd
@Bob_Adkins
@Bob_Adkins 2 месяца назад
I told my physician that the other day. I said "I'm a nerd and you're a nerd too, so I trust you". He took it as a compliment, and I think everyone should.
@Trox2018
@Trox2018 2 месяца назад
Almost no one thinks of Nerd as a pejorative these days.
@aidaneckart5054
@aidaneckart5054 3 месяца назад
I used to be extremely nervous using a plasma cutter. Respect of the tool that you are using is what keeps you safe. Understand what it's meant to do and how it does it.
@douglasphillips1203
@douglasphillips1203 2 месяца назад
My dad when I was a teenager was ripping boards for homemade moulding and one board had a hidden knot. He always used an 18" push rod (scrap 2x4). The board jumped and the saw ate the entire 18" push rod in the split second it took my dad to react. The blade ended up nicking his index finger. Observing that right there gave me an extremely healthy respect for the amount of damage a table saw can do faster than you can humanly react.
@matthewhall6288
@matthewhall6288 2 месяца назад
That kickback is the scariest thing about a table saw.
@johnabbottphotography
@johnabbottphotography 3 месяца назад
For a future video: One of my favorite videos was the video where you had talked about the lathe injury on your hand. I loved it because of the honesty of how easy it was that you could have hurt yourself. The Essential Craftsman has had similar videos, where he shares how he injured, or almost injured himself severely, on tools. I would love one or many videos where you walk us from one tool to the next, explaining how you injured yourself on that tool, and what we need to be aware of. Too often craftsman give tips on how to do things, without explain the dangers. I believe its not often enough that you share the lessons you learned because you almost hurt yourself; which is why I valued that video on your lathe so heavily. It was humbling to you, which made it valuable to us.
@aikumaDK
@aikumaDK 3 месяца назад
"Adam's guide to tools" would be an incredible series, I think. An hour long video going over the types of saws, followed by a video about hammers or sanding tools.
@thorjohnson5237
@thorjohnson5237 2 месяца назад
"And this is my 3/8 deep well hammer." ;) ~s
@HappilyHomicidalHooligan
@HappilyHomicidalHooligan 2 месяца назад
I think you underestimate his ability to expound upon a subject... Try an Hour long Video PER TYPE OF TOOL...1 hour on hand saws, 1 hour on powered saws, 1 hour on chisels and hand planes etc... 😄😁😆😅😂🤣
@thorjohnson5237
@thorjohnson5237 2 месяца назад
@@HappilyHomicidalHooligan Oh.... actually, that would very, very good... Here's how a chisel works, note that it has to be sharp or it will tend to cut you. Here's how to sharpen and use. Here's a jigsaw, and it's thinner cousin the coping saw and scroll saw... watch how the blades work and note that cheap ones stink because they don't hold the blade tight enough... ...
@steh8217
@steh8217 3 месяца назад
My shop is so small I started doing only hand tool work due to the limitation of space. Now I enjoy the satisfaction of making without powered tools. And as an added benefit, hand tools stop as soon as you nick yourself haha
@thomashverring9484
@thomashverring9484 3 месяца назад
Me too. I would love a bandsaw, though.
@davidholmes3323
@davidholmes3323 3 месяца назад
I have seen plenty of very serious even life threatening injuries with hand tools. The obvious sharp ones that come to mind are axes and wood working chisels.
@roberthousedorfii1743
@roberthousedorfii1743 2 месяца назад
@@davidholmes3323I was just about to add a comment that s/he CLEARLY has not put a finger in the wrong place while using a chisel. It is truly amazing just how much a chisel will stick in your finger bone when shoved in from close range with great force. Hand tools do NOT stop, lol...
@megrim8292
@megrim8292 2 месяца назад
Having taken a hand planer to the leg, and almost losing a finger to a router, the tool that scares me the most right now is my hand adze....I'm terrified of it and I'm no stranger to swinging all manner of axes, chainsaws and sharp metel things into wood to cut them.
@ChefSarah4104
@ChefSarah4104 3 месяца назад
This parallels "my" world so well. In the kitchen you treat every pan like it's hot and every knife like it's razor sharp. The moment you lose the respect for your equipment is when more accidents happen.
@balsalmalberto8086
@balsalmalberto8086 2 месяца назад
The old adage "A falling knife is like a falling Boeing b52"
@voggi9450
@voggi9450 3 месяца назад
I work in construction from personal homes to commercial buildings... the Porta band is a "problem solver"... everytime I use a tablesaw I hate it (you never have a perfect set up on a jobsite)... I certainly have to do things that are dangerous or not ideal. However, I always go through my "checklist" to make sure I'm not going to loose any fingers or get punched by a kickback...I may or may not have had my table saw on a slope on the sight so gravity helped me feed large sheets of plywood... you gotta use your head and expect all outcomes. The more you use a tool and understand it, the more you start to feel comfortable using. This last statement seems to apply most to my handled circular saw
@treborrrrr
@treborrrrr 3 месяца назад
I feel like that last part is what can get you. "Well this has worked just fine the last 10 times I've done it" and then BAM it gets you. That's how I slit my thumb with one of those super thin saws for rotary tools (great little saws btw, cuts through plastic like butter unlike those thicker brown ones). It bit into the work and kicked back into my thumb which I was stabilising the work with way too close to the blade. It wasn't a serious injury by any means but it hurt like hell and I felt really stupid afterwards.
@semilog643
@semilog643 3 месяца назад
@@treborrrrr That's exactly right. It's when you think you really understand something that you forget to ask, "what have I not considered here?"
@frankw7266
@frankw7266 3 месяца назад
You are absolutely correct about repetitive work, especially on a table saw. You can make a hundred cuts back-to-back, and then you get that one piece that has a totally different grain, maybe has a knot that you didn't see, or even a piece of small foreign object you were unaware of. My grandfather's nickname was Stumpy for a reason... saws demand the utmost respect and 100% attention, which is why seeing woodworkers wearing their ear buds listening to jams while working power tools drive me up a wall.
@Cheesus-Sliced
@Cheesus-Sliced 2 месяца назад
In defense of some of us that need music to focus, I have a tendency for my mind to wander when there's not enough stimulation. Having music going gives just enough additional stimulation that I can properly focus on what I'm doing, and get into a good flow with it, which is very hard to achieve without something consistent to fill the extra space in my perception. Without it, I tend to look around a lot, get bored quickly, and miss simple things I should notice because I'm distracted. There are a great many people in the same boat. At the same time though, having the reduced awareness of surroundings and reduced ability to hear the nuance in the noises our tools make adds a significant risk, so its a catch 22 for sure.
@scottrudy6736
@scottrudy6736 2 месяца назад
I agree, repetitive work has a tendency to cause complacency. Complacency has a tendency to cause inattention, inattention has a tendency to cause carelessness, and carelessness may cause unwanted damage. It is always important to stay focused.
@timberrecycling
@timberrecycling 3 месяца назад
i love, love, love the 'scared of tools' segment!!! i almost ran out of the room the first time i pulled the trigger on my first miter saw and felt it spin up in my hand. not being scared of power tools is the best way to get injured
@alfinpogform4774
@alfinpogform4774 3 месяца назад
My dad lost half a finger back in the 1960's with a circular saw, the blade guard didn't spring back after the cut so when he put the saw down after the cut the still spinning blade hit the ground and flipped the saw over into his hand. He did manage to get mileage out of the accident over the ensuing years by at various opportune times putting his finger stump under one nostril so it looked like his finger was up his nose to the second knuckle!
@HappilyHomicidalHooligan
@HappilyHomicidalHooligan 2 месяца назад
Oh, I LIKE HIM!!! He sounds like My kind of Smart Ass... 😄😁😆😅😂🤣
@alfinpogform4774
@alfinpogform4774 2 месяца назад
@@HappilyHomicidalHooligan Thanks! He was super practical, deeply philosophical, heartily humorous, and loved putting on a performance or two. Been gone 18 years now, I was lucky to have him as my Dad!
@MorningDusk7734
@MorningDusk7734 2 месяца назад
The first injury I was present for with my table saw wasn't even caused by the saw. I was ripping down a big piece of stock into a manageable board and had someone to catch the other side of the wood as I pushed it through, and apparently I didn't prep her or communicate enough because right as we got to the end the boards finished passing through and what I could best call a rough 4x4 of hardwood slid off one end of the table, causing her to drop the other end on her ankle, scraping up half her shin. I think she still has a scar today from that. Always make sure everyone knows what's going on at every step of the process, even if it feels unnecessary!
@jon8304
@jon8304 11 дней назад
Spot on. I heard a seasoned woodworker explain both of those important lessons: 1. The moment you feel comfortable around a saw is the moment you should be most afraid, and 2. The novice rarely hurts themselves, it is the skilled worker on their hundredth cut of the day who is most likely to have an accident.
@toohardtowatch
@toohardtowatch 3 месяца назад
One tool that I hadn't considered being particularly dangerous, until having a few incidents of my own, is the drill press. I've been bitten a few times, trying to put holes in small or irregular pieces, and holding them by hand. The worst of these incidents was drilling a hole in a small scrap of sheet metal, and having the drill catch and spin the piece in my hands, cutting a four-inch gash along the palm of my hand. Luckily, no permanent damage was done. It took a few bashed and gouged fingers to realize that drilling any thin or small objects without clamping them was a rather fundamentally hazardous operation, especially with larger spade/forstner bits.
@johnhoslett6732
@johnhoslett6732 3 месяца назад
I lived in Japan as a teenager in the 60s and immediately fell in love with Japanese hand saws. They cut when you pull instead of when you push. When a friend revisited Japan and asked what I wanted them to bring me, I immediately said a Japanese handsaw! 😎
@eitantal726
@eitantal726 3 месяца назад
they cut on pull instead of push. So what? mechanical work is needed. It's like paying the bill on the 15th instead of the 1st
@johnhoslett6732
@johnhoslett6732 3 месяца назад
Nope, it’s completely different. You can make much more accurate and precise hand cuts when you’re pulling and there’s no possibility of bending or flexing the blade on a power stroke. 😎
@myrcutio
@myrcutio 3 месяца назад
​@@johnhoslett6732I wouldn't be so quick to dismiss western saws. There are some truly excellent woodworkers who do very complex joinery exclusively with western push saws (see Rob Cosman for example). Neither style of tool is more or less accurate, they're just optimized for different skills and different craftsmen.
@brennyn
@brennyn 3 месяца назад
​ @eitantal726 You can do great work with either but cutting on the pull can feel a lot more natural to some people, kind of like push vs pull with sharpening tools on bench stones I guess. And I've definitely had to intentionally install a hacksaw blade backwards a few times to cut through thin materials in awkward places.
@johnhoslett6732
@johnhoslett6732 3 месяца назад
@@myrcutioRelax. I’m not dismissing western saws and craftsmen.. I just find Japanese handsaws surprisingly useful and prefer them for most ordinary tasks. And apparently Adam likes them too. 😎
@georgehorsey
@georgehorsey 3 месяца назад
I will definitely be adding planning/going through a mock cut before turning on the saw to the tool safety training we do with our FIRST robotics team. Great advice!
@mm9773
@mm9773 3 месяца назад
Also tell the team to never run a table saw that doesn’t have a riving knife. Unlike Lord Elpus here, who seems to think standing in a certain way will save him from the kickback that is waiting to happen.
@Boristhaspydr
@Boristhaspydr 2 месяца назад
Awesome to see that FIRST is still going; I was in the i think either 2010 or 2011 tournament; it was a fantastic experience!
@MeatBallOfWar666
@MeatBallOfWar666 3 месяца назад
I really appreciate your comment about repetitive work. A very good friend of mine essentially cut off his arm while cutting house siding on a miter saw. Upper arm, just below bicep, 98% through. He got complacent. Luckily, experimental surgery and very quick emergency response allowed him to keep his arm, and almost fully functional.
@eyespliced
@eyespliced 3 месяца назад
Big lathes are my favorite tool, but oh my gods are they actually fucking terrifying. Really anything that spins real fast and hard is terrifying.
@eyespliced
@eyespliced 3 месяца назад
band saws are a close second, but again it's still a big spinny thing, but _sharp!_
@diablobrian1
@diablobrian1 3 месяца назад
Being a Machinist myself I have to agree. I'm one of an elite group of machinists still in possession of all ten fingers.
@davidholmes3323
@davidholmes3323 3 месяца назад
When we did metal work and wood work at school. We were taught to always stand to the side or off centre to the tool that was spinning up when the switch was thrown. Google footage of a damaged grinding wheel disintegration on a bench grinder on start up. It will make you think about using a full face shield every time.
@Cheesus-Sliced
@Cheesus-Sliced 2 месяца назад
Yea maybe there should be 3 major thoughts when using any power tool: 1, what does it cut? 2, are you softer than that thing? 3, does it have trouble cutting that thing?
@Cheesus-Sliced
@Cheesus-Sliced 2 месяца назад
​@davidholmes3323 I worked with a company that mandated safety glasses at all times, safety glasses + face shield when doing any cutting, and safety glasses + goggles + face shield specifically when using abrasive grinder disks. Every induction they showed off a photo of a fragment of a shattered disk that went through a face shield, the glasses behind it, and was about 2mm from embedding itself in one blokes eyeball, and that was enough for them to say 3 layers are now necessary.
@johntaylor1947
@johntaylor1947 3 месяца назад
I have two of those portabans and have worn out three through the years. If you work with metal one of those is a absolute must.
@georgedennison3338
@georgedennison3338 3 месяца назад
I have a stout old, original condition Porter Cable I bought w/ about 40 blades, but despite being in like new condition, it kicks the blade off after 2 revolutions. I've disassembled it twice trying to find the problem & taken at least 5-6 runs at it when I'm feeling lucky, but cannot figure out why it dumps the blade in the same spot, every time. Since you've worn out a few, do you have any clues? Thanks, GeoD
@bgtyhnmju7
@bgtyhnmju7 2 месяца назад
Your explanation of the 90 / 10 relationship around a saw or tool, was very well articulated. Both with words, and your hands. Things I know I mostly(?) do, but a great description, and a good reminder.
@motorv8N
@motorv8N 2 месяца назад
Great topic. My son and I were building a boat together and had to push a large laminated piece of transom through a portable contractors table saw to bevel one edge. The piece was much larger than the small table so we each took an end to feed it through. I was stepping around to the side of the saw to get a better grip on the piece when I twisted it by accident. The blade grabbed the offcut and fired it like a missle through the space where my midsection had been 5 seconds before, embedding the sharp slice of wood in the back wall of the garage. Whack!!. It all happened in the blink of an eye and I sweat just thinking about it these years later.
@kennethelwell8574
@kennethelwell8574 2 месяца назад
I had a kickback while trimming a tapered edge off of a broken pallet board. I got a purple rectangle bruised onto my belly! Luckily I had set the fence with the narrow end of the board, so the wicked pointy end was away from me. I think of that often, 35 years later…
@stco2426
@stco2426 3 месяца назад
Excellent advice to practise and think through the entirely of the process from lighting and space (two that are often overlooked) to the next part of the build. Table saws need respect, but so too so most tools and workshop work. Never do it quickly, when tired or when distracted.
@Mooncake-01Y09
@Mooncake-01Y09 3 месяца назад
Fantastically explains what you need to pay attention to when working with a table saw. Only a long-time, experienced and true maker speaks like that. ❤
@stevestolarczyk8972
@stevestolarczyk8972 3 месяца назад
Thank you so much for not just teaching and demonstrating safety around power tools, bug for being so open about your own anxieties.
@TCNickelson
@TCNickelson 3 месяца назад
Lovely seeing you at comicon KC Adam!
@jimintaos
@jimintaos 3 месяца назад
Years ago I was taking a graphic arts class and one of the things they had for us to use was a big old Heidelberg press. As the instructor was introducing this monster to us he took a pencil out of his pocket. A number 2 Ticonderoga. He handed it around and asked each of us to use our finger nails to make marks on it. We all did our best and it was covered with shallow crescent shaped nail marks. He then started up the press and when it was going along at a good clip he dropped the pencil into it. Instantly it was reduced to shards and toothpicks. He turned off the press and looked at us, "any questions?" he asked.
@HappilyHomicidalHooligan
@HappilyHomicidalHooligan 2 месяца назад
Yes... Is it too late to drop this Class? 😄😁😆😅😂🤣
@jimintaos
@jimintaos 2 месяца назад
You just haven't really lived until you are dropping blank sheets into that gaping maw with one hand and pulling the printed pages out with the other at the rate of 15 per minute. or 900 pieces per hour. Total focus.@@HappilyHomicidalHooligan
@robertpearson8798
@robertpearson8798 3 месяца назад
I agree completely about the dangers of repetitive work, repetition promotes complacency and encourages the mind to wander. One of the advantages of a bandsaw over a circular saw is that there’s little possibility of kick-back (unless you try to cut round stock without proper holding). One of my most used tools before I retired was a twenty inch disc sander for making patterns. I had a healthy and cautious respect for it and never sustained any major injury but my Boss was terrified of it and wouldn’t go near it.
@eulerian9693
@eulerian9693 Месяц назад
I actually find a lot of use in watching accident videos - you get a healthy respect for how quickly things can go awry even when you think everything looks safe going into it. There are some accidents where I've thought "Oh wow I would have never expected that to happen" and so now it becomes yet another thing to keep in mind. The more risks you become aware of, the more informed the setups become.
@BruceMastracchio
@BruceMastracchio 3 месяца назад
Adam, I love the Japanese pull saw as well, and had the same problem of never remembering which side was for which cut. So I simply took a sharpie and made a plus side near the cross-cut side, and an equals sign near the rip side.
@berthatton9410
@berthatton9410 3 месяца назад
Yes. So agree on issue of repetitive work. I think the mind starts to delegate to muscle memory tasks that are repetitive leaving it free to become distracted by some other thought or nearby motion. Just be aware all. Thanks Adam for the reminder.
@SolidIncMedia
@SolidIncMedia 3 месяца назад
I did woodworking at school in year 10. It was a sobering experience, giving a bunch of rowdy teenagers with not-yet-fully-formed brains sanders that could sand your skin down to the bone or spinning blades that mean you could never give your mates the middle finger ever again. Even the most chaotic class clowns stopped and paid attention when the teacher gave instructions on how to be safe around these tools. I dunno where my jigsaw puzzle is now, but I still remember being really bloody nervous having to use the jigsaw to cut out the pieces. My hat always goes off to people who do woodworking.
@Zelmel
@Zelmel 3 месяца назад
Speaking of the terror of powered saws, I recently saw a short that had a guy accidentally trigger the blade stop system on his table saw when he wasn't being careful. It was very interesting seeing one of those systems actually deploy on a person rather than the classic hot dog test.
@adamrubella2290
@adamrubella2290 3 месяца назад
Another important thing with table saws is to avoid removing the blade shield and associated anti kickback devices such as riving knives whenever possible. Anyone who has ever had a piece of material kick back at them will tell you it’s a terrifying experience you will never forget and never want to repeat. Myself included. Also the possibility of maiming a hand is dramatically increased with a kickback. Like my dad told me when I first started using power tools all parts and pieces are there for a reason, use them.
@DARKLYLIT
@DARKLYLIT 3 месяца назад
You are right to consider a table saw as the most dangerous tool....because it IS! That said, once you know how to use one safely, there's no problem with it. It took me a good 6 months to become comfortable with one when I first started working in carpentry. You can always tell a "newbie" using one, because they're not in control. They act like IT'S in control. It is NOT. First lesson: YOU'RE in control. (as long as you know how the bloody thing works and that it's properly put together and safely tuned/maintained)
@joermnyc
@joermnyc 2 месяца назад
Scary moment in high school wood shop, band saw blade just SNAPPED while I was using it loud enough for the teacher at the far end of the shop to hear it. He jumped on the emergency power cut as fast as he could, but I’d already hit the off switch and backed away from the machine faster than him. Just “noped” it out of there and let it run to a stop on its own. Healthy respect for the saws. Fear and loathing for the lathe meant I was using the band saw to taper my table’s legs instead of turning them. One student was careless in tying his apron, spinning lathe just ate it right off of him! Thankfully the part of the apron around his neck ripped instead of resisting, because he could have face-planted into the spinning piece of wood.
@dwaynesykes694
@dwaynesykes694 2 месяца назад
Woodworkers wear aprons around lathes? May as well throw on a tie and some long sleeves while you're at it... Go in any metal shop and you won't see the guys working on a lathe even wearing gloves. Their hands will probably have a few cuts and scratches, but that's better than what a glove or any loose clothing pulled into a lathe will do.
@chriscluver1940
@chriscluver1940 2 месяца назад
@@dwaynesykes694 Generally a canvas or leather apron, plus a face shield. A thick shirt where you can close the collar works too. Wood chips and splinters can fly hard and fast, and most of the time they're flying in your direction. Wood lathes don't have the speed and torque that a metal lathe has, and they generally stop much quicker, but basic safety for rotating machines still applies. No gloves, loose sleeves, or hanging bits on clothes, etc.
@gospyro
@gospyro 2 месяца назад
Back in high school woodshop, when the teacher was going over the safe use of the table saw, he talked about where NOT to stand beind the saw, then pointed out this perfect 2"x4" hole in the wall at the far side of the room. It was a perfect rememinder of the power of the tools, and specificlaly the table saw!
@Whumpdrew
@Whumpdrew 2 месяца назад
I also love my portable band saw. One of my favorite things is that I have a stand for it that turns it into more of a traditional band saw allowing me to set it up wherever I am working. It is one of my all time favorite tools and I cant recommend them enough.
@1683clifton
@1683clifton 3 месяца назад
Hands down first saw you need that does everything on no money is the jigsaw.
@myofficegoes65
@myofficegoes65 2 месяца назад
Back when I was in wood shop class in junior high school, the radial arm saw was a scary piece of equipment. Since the blade is spinning toward you, when cutting through a piece of wood the saw is actually pushing toward you!
@wildflower1397
@wildflower1397 3 месяца назад
Right now Mythbusters is winning a Kyle Hill poll for the best science show of all time. Congrats! ❤
@johnmaida160
@johnmaida160 3 месяца назад
Amen, Adam! I have been using BIG power tools since 1973. I still rehearse different cuts and take my time.
@__-vb3ht
@__-vb3ht 2 месяца назад
This is great! I've been getting better with using power tools, but I am still terrifed of a lot of them, and prefer spending way longer with a hand tool. It's awkward working with other people who have got no qualms about any of these tools, but hearing people talk openly about the fact that operatign a moving blade close to your body does indeed take workign up some courage is a great relief. And the more I see and pay attention to how some of my friends who have got no concerns about power tools end up using them, the less I am ashamed of my reservations. Making free-hand diagonal cuts on a table saw without a guide rail, no pushers whatsoever, on an uneven floor, in a farm shed lit by a single lightbulb on the far side of the room, and of course the blade is always fully up, because it's too annoying to adjust it for every job and more blade is more better...yeah just give me a hand saw if that is the setup you expect me to work with
@georgelemke6556
@georgelemke6556 2 месяца назад
When I was a very young high schooler the woodshop teacher put the fear of the dying universe into me. It took almost the whole quarter before I would even turn one on again. For some reason though I was comfortable with the bandsaw and learned to make bandsaw boxes from scrap laurel that I sold to other students. I still take it slow with a table saw. Thanks, Mr Green!
@dacull5755
@dacull5755 3 месяца назад
its great to hear adam's process the fact he has an air of no process but is programmed in the making and the fact he can dispense advice like this on the fly gives me a great feeling of calm.. wonderful stuff
@zwerko
@zwerko 2 месяца назад
07:23 - It's pretty much the same in the cooking world. People who don't often cook think that the cooking is the largest part of, well, making the meal, whereas everything is about the prep-once prep is done properly, cooking is the most uneventful part.
@felipeyahooo
@felipeyahooo 3 месяца назад
Yeah, great tips Adam. I always treat my table saw with respect. Plan my moves, make sure the floor is clear and I'm not going to step on anything that might make me lose my balance. Good lighting, hearing protection, eye protection etc. Anything with spinning elements can be dangerous, angle grinders, table saws, even a simple drill can hurt you if you are not focused on what you are doing. I have a scary table saw with a 7hp motor that is used to cut down larger pieces of wood. It goes through brazilian rosewood like it's butter. That thing is always operated by two people.
@argentlupin
@argentlupin 2 месяца назад
Great video. The advancement in table saw safety tech is crazy now the saw blades can detect when you touch them use a small electric current and drop the blade below the table and shut off in micro seconds. Still good to keep up safety practices since there are plenty of old table saws and common sense. Besides the obvious cutting off or horrible wound from the saw that scares us the thought of something flying off and hitting you or someone else is also worrisome. All of the horror stories or scary thoughts are good to acknowledge but do not let them cripple you from being able to use these tools.
@DogDog173
@DogDog173 3 месяца назад
this is a good video. especially the second half.
@jimnelsen2064
@jimnelsen2064 2 месяца назад
Wiser and truer words are seldom spoken.
@deltaangelfire
@deltaangelfire 3 месяца назад
same, i was super anxious around powered saws back in high school and college when doing set work in the drama club. I still won't go near a table saw, but I got better about using a bandsaw, a skill saw, and an oscillating tool with a sawblade which I feel relatively safer around. I started working my way up from a rotary tool with grinding disks which felt safe enough and doing long cuts with hand tools first on wood and metal too until my arms were sore and exhausted to the point where the efficiency possibilities and studying the dangerous and safer points of the various saws overrode my fear.
@donaldevans5752
@donaldevans5752 3 месяца назад
Thank you Adam , I love these videos' .
@tomb4045
@tomb4045 2 месяца назад
Decades ago, when I was a teenager, I nipped off the end of my thumb on a table saw, cutting, of all things, Styrofoam sheets. It was just the very end and the skin grew back but I didn't even realize it happened until I saw red on the sheet of white Styrofoam. Looking back, I realized it happened because there was no riving knife on the saw and there was kickback. I learned a lot about setup and situational awareness. Now, I have a somewhat fearful respect for all my "kill and maim" tools-table saw, band saw, drill press, thickness planer, jointer and miter saw. I have done other injuries to my hands over the years resulting in scars but none on the big tools. I just went through some repetitive cutting, breaking down cedar fence pickets to build some large planters for my wife. You speak wisely, Adam. The more you make the same cut on that table saw, the more laser focused you need to be with all of your movements. I am not retired yet, still working as a field service engineer, maintaining and repairing digital imaging and bio-metric solutions and I need my hands intact.
@jasongracia5310
@jasongracia5310 3 месяца назад
Would love for you to do a video going over different saws. I understand the love you have for your dewalt. My job has the milwaukee deep cut portable bandsaw and I use it whenever the opportunity arises.
@Kevin-to7dz
@Kevin-to7dz 3 месяца назад
"Repetitive cuts are when you have to be on high alert" so true! Say that over and over again! Oh that would be repetitive too.
@Artanis1000
@Artanis1000 2 месяца назад
Best safety advice you have ever posted. 3 experiences where I've been very lucky. Table saw: piece of wood kicking back and knocking my baseball cap off. Band saw: drawing my thumb in and causing stitches. Bungee cords: tying down branches on a cart, bungee hit me in the face and could have knocked an eye out. There are horror stories of all of these. Stay safe.
@matthewlennox9482
@matthewlennox9482 2 месяца назад
The repetitive thing on a table saw is so true. I learned that lesson early at about 21 years old, was cutting up cardboard into some small pieces and it was so easy my mind wandered and it kicked over and my hand got way too close to the blade. Much later on when I was teaching people to use a table saw I always said "the second you feel completely comfortable on this saw stop what you are doing immediately and walk away. This thing should always always always scare you, at least a bit"
@KevinT3141
@KevinT3141 2 месяца назад
Brilliantly explained about the saw set up. The one thing I would add to that list is dust/chip extraction (or at least removal, like a blower) so that you can always see what you're doing.
@ptchippy
@ptchippy 2 месяца назад
You are right about repetition on the table saw, and I've found over the years it's when you get to the end of the run that you tend to relax especially the last one.….to overcome this I imagine that it's not the last one, saved me a few nasty kickbacks.
@0097205
@0097205 2 месяца назад
It took me a long time and a lot of cuts to get comfortable with power saws, but the more I learned to relax and let the tool do the work the easier to make cuts and the better the cuts became. Same thing with routers. Now the router is one of my most used power tools (along with the jigsaw). Working along side professionals and learning how they approach things went a long way to building confidence to balance out the healthy fear of power tools
@HisshouBuraiKen
@HisshouBuraiKen 2 месяца назад
Definitely true for just about every aspect of building, making, repairing, renovating, you name it. The setup and prep work are absolutely 90% of it.
@jothain
@jothain 3 месяца назад
I got one Makita battery bandsaw at work. It's great. Love taking it to outdoor cold storage, make a rough cut and go to workshop and do the actual accurate trimming
@donbarr9487
@donbarr9487 2 месяца назад
Thank you for mentioning "fixtures". A good fixture is one of the most important things you can have in the shop, it helps you safely make repeatable products, and can keep you from having to chase stuff around on the bench/table (which increases the risk of damage to you or the thing you're making).
@tommiller7177
@tommiller7177 3 месяца назад
I worked on a framing crew in my 20s with some guys from Cali. They had worm drive circular saws with no blade guards. The learning curve on safe use is very steep. My worst injury with power saws was a band saw. When you look at the cut, and then it starts bleeding. Good times.
@martinsmith251
@martinsmith251 3 месяца назад
“All tool usage is a battle with my impatience”. Ain’t that the truth!
@jbergenudd
@jbergenudd 3 месяца назад
Yes! Do a saw episode!!
@starhawke380
@starhawke380 3 месяца назад
I was thinking of comments to add, but you listed every one of them! Ive gotten used to my table saw, it doesnt scare me any more. The router table on the other hand.... Hate that thing...
@AlexDiesTrying
@AlexDiesTrying 2 месяца назад
The good thing about casual woodworking is: You don't necessarily need powertools. And the good thing about paper: Safety checklists. Reading them every morning you start may be boring but it keeps your fingers attached. Planes have checklists for a reason. Why almost all other things people do eventually get winged, running on almost blind autopilot...well...
@hogs0war
@hogs0war 3 месяца назад
I used to work for someone who had a DeWalt table saw that didn't have a fence and wouldn't turn off fully every time you hit the off button (it would power down a bit only to spool back up). So we named it Mr. Scary (complete with Sharpie name tag) and I only used a compound mitre saw when working for him.
@ArkansasPilgrim
@ArkansasPilgrim 2 месяца назад
You're spot on about repetitive work. You get into a habit of doing the same thing over and over, and all od a sudden you will do something else, which is usually dangerous.
@steadfasttherenowned2460
@steadfasttherenowned2460 3 месяца назад
The skill saw and the angle grider were the 2 tools that freaked me out the most when i started making things myself.
@squirrelzar
@squirrelzar 2 месяца назад
Hearing Adam talk about how terrifying a router is was so validating. Sometimes it’s just the right too for the job but god to I hate taking it out
@SuperBoppy
@SuperBoppy 2 месяца назад
Good advice. Complacency around power tools is what gets you hurt.
@wescat2
@wescat2 3 месяца назад
In our high school shop class we had a radial arm saw that was from the 40s or 50s. To stop it spinning for hours we took a board and wedged it between the roller bearing and the blade casing. We never thought twice about it. That board had a defined burn mark on it the 4 years I was in school. My dad used this same saw when he was in high school. Safety 3rd.
@Shiznaft1
@Shiznaft1 2 месяца назад
Great to see you at Planet Comicon this weekend!
@GearHeadedHamster
@GearHeadedHamster 2 месяца назад
A good rule of thumb is: If I slip / if my work slips off the tool, am I in harms way? If the answer is ever yes, then you should reconsider how you are holding the tool / work. This advice is especially true for knifes.
@msmknz
@msmknz 2 месяца назад
Agreed, being afraid of table saws and things like it is objectively correct
@user-ky8fd7wy6u
@user-ky8fd7wy6u 2 месяца назад
I'm a mechanic for 24yrs and use stuff that can hurt you everyday, but my most feared tool is a chop saw with a metal cutting blade cutting metal, especially pipe or box, had a peice kick out once and I got a Fred Flintstone thumb from it. I agree with a good stance, and even practicing the move you will be making, can never be to careful
@zenobia256
@zenobia256 2 месяца назад
I worked for a company that made hardwood doors / jambs etc. and I saw a number of table saw accidents including one where a ripping was thrown though a metal roll-up door 20+ft. away!
@RinoaL
@RinoaL 2 месяца назад
When he started saying he hasn't broken a tooth off his Ryoba in a few weeks I was at first thinking "Oh man, I probably break mine too much" but then he said "in a few weeks" which made me feel better. haha I break a tooth on my Ryoba maybe once every few months.
@rinston3591
@rinston3591 2 месяца назад
Great power tool advice Adam, always respect them, remember they are dangerous and preparation is the key
@florentbled4697
@florentbled4697 2 месяца назад
One of my most important advice to myself when woodworking is: "if something doesn't feel right, stop whatever you're doing and reassess". Gut feelings have proved successful to keep all of us alive for a long time now, and if my Spidey sense tells me "I'm not comfortable with how we're this right now", I always find it useful to check what I'm doing and see if i can do it in a safer way.
@MattTester
@MattTester 2 месяца назад
I love my portable bandsaw, with a nice compact table it's one of the best power tools. Being hard to hurt myself was an important thing for me too, it gives me confidence to make fiddly cuts that would be much more dangerous with other tools.
@watchthe1369
@watchthe1369 3 месяца назад
I always liked the classic power combo, Table saw, Drill press, angle grinder/ electric drill, welder.
@seanhollandcanada
@seanhollandcanada 3 месяца назад
I sooooo agree, The actual cut is just the cherry on the top of all that prep. I'd add: develop habits like not standing directly in front of the blade which is just waiting to shoot a piece of wood back at you with the force of a cannon. I've had chunks of wood embed themselves in the wall behind me. A sturdy shop apron is a good idea. Mine has a hole in it from that momentary lapse when I stood right in front of the blade and a thin strip came flying back like a crossbow bolt. Didn't hurt me because I was very lucky. Just a canvas apron from Katz-Moses but it did the job.
@madpharmyhuma
@madpharmyhuma 2 месяца назад
I couldnt agree more, my portaband might be my favorite tool in general. so good i had to get a corded one that sits on my swag offroad table and a battery portaband
@waldemarii
@waldemarii 3 месяца назад
Thank you Adam. I hope that beginners find your content.
@mm9773
@mm9773 3 месяца назад
I don’t: I really like him, but he runs a table saw without a riving knife in front of six million viewers. Completely irresponsible.
@waldemarii
@waldemarii 3 месяца назад
@@mm9773 In Finland we have this saying: Do it as I tell you, not how I do it.
@michaelholmstrom7677
@michaelholmstrom7677 3 месяца назад
Best advice for cutting using any saw always figure out where your hands will be throughout the whole cut and where the blade will be.
@alexdolphin5443
@alexdolphin5443 2 месяца назад
I would like to hear more about Adam's thoughts on chair lifts!
@francistaylor1822
@francistaylor1822 3 месяца назад
I bought a japanese saw a year ago. Its lovely, I wish my Grandfather got to use them instead of the normal ones I think he would have loved it.
@rshawiii
@rshawiii 2 месяца назад
Please do a whole series on what the many different cutting tools can do, overlaps, trade offs etc. Don't forget to include one of the latest to become affordable to makers: the laser cutter engraver.
@Zyn88
@Zyn88 2 месяца назад
during a shop class in high school, my instructor explained the table saw is responsible for the most injuries in the shop, and it wasn't a joke. That thing is terrifying, and it demands a healthy respect when using it. There is nothing wrong with being anxious about using it, but you 100% need to know what you're doing to be safe with it
@TechnoGeek18023
@TechnoGeek18023 3 месяца назад
One of the most terrifying saws I've used is a toe kick saw, that thing scares the crap out of me, more than routers, planers, table saws, and band saws, and I'm saying that after a student in my junior high school wood shop had a hand get sucked into a planer. I mean when you need a toe kick saw nothing else really comes close, but dear god those suckers are scary to work with and difficult, they want to leap out of your hands, and take some part of you with it.
Далее
Tools That Disappoint Adam Savage
14:34
Просмотров 320 тыс.
nyan.mp3 - Хватит мне звонить #nyanmp3
00:16
The Most Confusing Part of the Power Grid
22:07
Просмотров 774 тыс.
Introducing the Plastic Kizen Mitre Fence!
1:30
Light sucking flames look like magic
18:05
Просмотров 2 млн
Why Nuclear Rockets Are Going To Change Spaceflight
22:03
What's the Difference Between Paint and Coatings?
14:23
What Happened to C-3PO's Original Costume?
13:36
Просмотров 245 тыс.
Alternative to bearings for tiny robots
12:05
Просмотров 328 тыс.
Где раздвижные смартфоны ?
0:49
Просмотров 600 тыс.
Неразбиваемый экран!
0:23
Просмотров 41 тыс.
5 САМОДЕЛОК ИЗ DVD ПЛЕЕРА
10:10
Просмотров 84 тыс.