Adam Savage's Favorite Tools: Safety Goggles!

Подписаться 7 млн

Просмотров 161 тыс.

50% 1

Dewalt Safety Goggles: amzn.to/330a4Bf
After a recent shop accident that required three trips to his ophthalmologist, Adam is a convert when it comes to wearing safety goggles for all kinds of operations in his workshop. Today he tells the story that that shop injury and gives his pick for his favorite go-to safety goggles for everyday shop use.
$37 workshop apron: amzn.to/3fHKdSs
Adam's Everyday Carry in his apron:
Papermate Sharpwriter #2: amzn.to/2xSMaKL
Pica Pen: amzn.to/2TcSep9
Whiteout Pen: amzn.to/2YSrvSg
Small Machinist Square: amzn.to/311GLLq
Flush Cutters: amzn.to/3csoGuY
Dial Calipers: amzn.to/3fGRSk4
Giaco Maker Knife: giaco.com/products/maker-knife
30-degree Multi-Blade Cartridge Knife: amzn.to/2LKyQvq
Heavy Duty Multi-Blade Cartridge Knife: amzn.to/2Zm3DXy
Multi-Blade Cartridge Snap Knife: amzn.to/3cJnJyP
Extra blade packs: amzn.to/2X5hChw
Shot by Adam Savage
Disclaimer: Tested may earn an affiliate commission when you buy through the links here.
Tested Ts, stickers, mugs and more: teespring.com/stores/adam-sav...
Subscribe for more videos (and click the bell for notifications): ru-vid.com_c...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachter.com
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Thanks for watching!
#AdamSavage #FavoriteTools

Наука

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 708

@tested 4 года назад

Dewalt Safety Goggles: amzn.to/330a4Bf

@troseberry91585 4 года назад

$9.99 right now for me! Ordering as soon as I'm done typing this!

@8BitOrin 4 года назад

I'd love to learn how you solved the reflection issue the yellow causes when wearing those Dewalt goggles. I'm personally prone to Ocular Migraines and my glasses alone can cause an issue. The Dewalt goggles cause a double ghosting effect due to not eliminating enough light penetration through the silicone surrounding the large plastic lens. For me I end up seeing my own eyes looking back at me while wearing those. Personally I've looked into dying, or painting the silicone to improve the light blocking, but I've yet to find a good solution.

@TheChiefSmeg69 4 года назад

The yellow tint used to be issued to our night shift workers in their safety specs to combat glare - I never tried them because I never worked nights.

@Joliie 4 года назад

I have a pair of safety glasses with prescription (payed for by my work). My nose gets itchy and eyes watering when I put on googles over my normal glasses Also have a pair of safety boots with steel sole, so everyday is leg day

@tomhorsley6566 4 года назад

Thee's loads of negative reviews on amazon saying they do so fog up and aren't anti-fogging at all.

@Ragnarok043 4 года назад

as my shop teacher once said, you can still grab and walk with a prosthetic limb but you cant see with a prosthetic eye

@herculesbrofister265 4 года назад

They make glass eyes

@NotTheStinkyCheese 4 года назад

@@herculesbrofister265 you still can't use glass eyes to see ;-) And with the exception of a few experiments cybernetic eyes are still in the experimental stage ...

@KGiustOD 4 года назад

Eye doc here. I’ve seen the horrific things and I’ve treated those horrific things. The Dewalts are hands down my favorite. They are what I wear in my shop. And they are what I recommend to patients. Worn over prescription safety glasses, they provide better protection and they help Rx lenses last longer.

@JanetWilliams01 4 года назад

Good recommendation! Thanks

@donkeyslayer8370 4 года назад

what prescription safety glasses do you use?

@KGiustOD 4 года назад

Donkey Slayer I fortunately don’t require a prescription. But most any US optical will sell you a pair of Z87.1 prescription glasses that were made at a certified lab in the US. The brand isn’t as important as the source.

@UD503J 3 года назад

Heck yeah! I looked at my Amazon history and saw that I bought a pair of these about 3 years ago. I routinely wear them over my rx glasses (or even sunglasses, depending on where I'm working.) Had a chunk of plywood come off a table saw about a year ago and hit me square in the bridge of my nose. Probably would have cut me real well had I not had these on, and a few mm to either side could have been a bad day. The googles just have a little scuff there.

@mattwhatleyrn 4 года назад

I’m a nurse. I wear these in COVID rooms. They’re super comfortable, and don’t fog.

@JanetWilliams01 4 года назад

I was wondering about this. They seem perfect for COVID eye protection. Well, maybe nothing is perfect, but these sure seem close.

@janajeffsilvernickelladventure 4 года назад

I use them as well. Firefighter EMT and I use them for all isolation calls. Thank you for sharing.

@PrograError 4 года назад

When the hardware Shop and medical need collide...

@Jesiahjesiah 4 года назад

these have rather large ventilation holes. Do you do anything to fill those in to create a true seal?

@alaric_ 4 года назад

@@Jesiahjesiah But then they start fogging and you can't see. It's a tradeoff. I have understood that the eye procetion is mostly for the direct mist/spray of potentially infectious particles. As the breathing doen's go through that, there is very little air movement into or out of it (the main reason for fogging). If you want 100% quarantee then you need laboratory grade safety gear.

@jjbankert 4 года назад

Adam: "I'm grateful that in 40 years of making stuff, Ive only had to visit the doctor twice.." Me: "Seems pretty good" Adam: "... for my eyes"

@robertanderson1043 4 года назад

That got me too. 😂

@NoneOfYerBidniz 4 года назад

I LOL'ed at that too. I love Adam and admire what an amazing maker he is but his shop safety makes me cringe. I can totally understand why he drove Jamie crazy.

@rafael661kc 2 года назад

He had us in the first half not gonna lie lol

@ktulu193 4 года назад

Does this mean we will see a day when Adam is wearing a respirator?

@Rotsuoy 4 года назад

I fucking hope so. I have a heart attack every time he cuts foam.

@ktulu193 4 года назад

@@Rotsuoy you mean anytime he cuts anything? Or sands anything, or lacquers anything etc

@thomashverring9484 4 года назад

That would be awesome! It drives me mad!

@matthewsmith4245 4 года назад

I think we can count on one hand the number of times he wears hearing protection. I'm also surprised he still has all of his fingers considering how he operates a tables saw

@BROON71 4 года назад

@@matthewsmith4245 A favorite of mine is when he pulls the table saw toward himself whilst the blade is spinning away. Classic Adam move.. 🤢

@stephanieflorence8109 4 года назад

I'm imagining the lecture Adam got from his ophthalmologist.

@DeadFastProductions 4 года назад

Or his mother... lol

@stephanieflorence8109 4 года назад

@@DeadFastProductions probably one then the other 🤣

@bergamt 4 года назад

"You weren't supposed to try that at home"

@PyroX792 4 года назад

A lecture he had to hear three times since it took three trips to fix his eye

@WIImotionmasher 4 года назад

"Years ago.. when I played the saxophone" First of all, didn't see that coming at all Second of all.. How have I near heard this

@BROON71 4 года назад

He has told that saxophone story on his podcast in the recent past...

@majuss06 4 года назад

What I registered most about that statement was my total and absolute lack of surprise.

@lieneux200 4 года назад

If you have "near heard this" haven't you actually heard it? The deep question of the day.

@jangtheconqueror 3 года назад

@@BROON71 Last I heard about this was in like 2013-2014

@Lethgar_Smith 4 года назад

So, I'm supposed to believe now that the next time we see Adan using a power tool he'll be wearing those goggles? Yeah, right!

@jacobdegeling 4 года назад

He won't show his face LoL!

@the_original_dude 6 месяцев назад

@@GhostOfUhd still haven't seen him use safety glasses. Though maybe I haven't seen the ones where it was necessary

@otakuribo 4 года назад

"weird, specific type of face" is pretty accurate to me lmao still wanna protect it tho because it's MY weird, specific face

@csn583 4 года назад

My go-to line in the brain-bucket vs. full-face motorcycle helmet debate is "My face isn't much to look at, but I've grown attached to it!"

@Jambunctious 4 года назад

I remember adam talking about his eye in a podcast a few weeks ago. Glad it's fully out now.

@ZacabebOTG 4 года назад

I'm glad it's still in.

@Jambunctious 4 года назад

@@ZacabebOTG Doctor: Instructions unclear, replaced with steel eye.

@liew9574 4 года назад

Here’s mine : About 5 years ago and just before I went to work in the morning I decided in my wisdom that it would be a good idea to use the dremel to shorten a tiny bolt that was just a tad too long. Annoyingly I couldn’t find my safety goggles, and thinking it would just be a 5 second job I carried on. Didn’t feel anything dramatic initially, but an hour after the job was done I felt that there was probably some dust on my eye - tried washing that off but no joy. It started hurting like crap the next day, so off to the hospital I went.. The eye specialist took a look through the scope and said “it seems there is a metal shard lodged in your eyeball.. and it was probably quite hot when it impacted cos it’s caused a burn... and it’s started to rust...” 😱😱😱😱 Long story short, he managed to get the shard out of the eye (thankfully it was 3mm off and on a part of the eyeball where I wouldn’t notice the scarring), And I’m perfectly fine today. So goggles, everyone!

@johnrobinson2228 4 года назад

Was drunk last night and watched the first season of mythbusters for the first time in ages. Adam, you’re awesome and I have learned so much from you over the years. Also, you’ve aged like fine wine!!!

@davidkbailey 4 года назад

Adam, I’m a public school teacher, and I was struck by the truth of your statement, “A low threshold of entry encourages use.” It is the same in any classroom in the world-we learn to guide our students to grow in their understanding of the world and to wrestle with challenging ideas by presenting a path that appears less intimidating in order to build their confidence to learn to explore the world on their own. Thanks for so eloquently sharing your wisdom. It was appreciated.

@dorsk84 4 года назад

"I don't like being lucky. I like being smart!" - Han and Talon Karrde having a stare off

@Quietkitsune 4 года назад

Talon Karrde... that’s a name I haven’t heard in a long time.

@seanconlin8712 4 года назад

Adam I appreciate you showing the young and upcoming makers that they need to practice safety. They want look up to you and aspire to be like you you showing them what they need to achieve this is great. Please keep this up.

@luvnotvideos 4 года назад

This will be the second of Adam's videos that I'm forwarding a link to our OSHA teacher. Gotta love it when a well known professional posts "lessons learned" - especially someone of Adam's caliber and fame. Admire a man that not only admits mistakes, but helps others learn from them as well.

@Minecraft-gw1jv 4 года назад

Glad you came around and start wearing your PPE.... it’s a lot better then being in the ER and loosing something that you could have avoided. Stay Safe Everyone!

@larrystrayer8336 4 года назад

Yesterday I had over-glasses safety glasses on as usual and a piece of grinding debris got into my eye. I was able to flush it out. I’ve had near misses before. I just ordered the Googles. You were my motivation. Thanks and u deserve the bitty commission.

@invidious07 4 года назад

I've got a pair of those Dewalt goggles when I put down laminate floors in my son's nursery a few years back. I love them and use them often. Good reminder to buy a few extra pairs.

@MiguelMartinez-hm9wk 4 года назад

I really appreciate you guys listing everything Adam is using. Thank you!

@Cybrdra6on 4 года назад

I purchased these goggles along with a nice case for them on Amazon, and I already love them! Thanks, Adam, for a great suggestion. I have several other tools you've recommended in m cart to buy as money permits. I wanted to share my story of eye damage. I have managed to escape eye damage from most dangerous maker projects, shooting guns, and lots of yardwork. But a long time ago I did landscaping for a living and was hurriedly flinging pine bark mulch out of the back of a truck into a new flower bed to get done and go home for the day. I managed to get a tiny piece of bark lodged in my eye. What a painful injury! I also had to go to the eye doctor to get it removed, and she said it scratched my eyeball. It was sore and burning for several days after that. I was super careful from then on. I plan to use these goggles both for maker projects and yardwork such as weed whacking. Thanks again for the great suggestion.

@Swanstardesigns 4 года назад

Funny timing for this video, I just bought some safety goggles yesterday and they arrived today! Hundred percent agree, protect your eyes! Glad to hear your accident wasn't life changing!

@FappinSteve 4 года назад

2:52 Well..i think we can all agree, we *need* a video of you and a saxaphone..

@indysgill 4 года назад

I'll be disappointed if it's not the opening of Careless Whisper.

@blitzgordon3515 4 года назад

@@indysgill or Baker Street - Gerry Rafferty ;)

@mlelyo1989 4 года назад

A saxophone video from Adam and hearing protection for us.

@DrakeMagnum 4 года назад

Adam Savage playing saxophone in safety goggles

@kallistokaos1 4 года назад

Yay! Thanks Adam, I’ve seen so many eye injuries due to people not wearing eye protection. Doing a Happy Dance now.

@Torsan1977 4 года назад

Good to see you advocating this. I've started letting my son ( 6 yo) use the shop (closet) a bit now with just a hammer and some nails and the only rule is that he has to wear safety glasses at all times.

@SpacewolfDan 4 года назад

i just bought them cos you. i wear glasses and they all steam up. The feature of these, they promise they dont. Amazing!

@kayzinwillobee 4 года назад

I ordered these before the video was even over. I could never find a pair that fit over my glasses that wasn't expensive. Thanks for the tip !!!!

@jamalhussain9162 3 года назад

Thank Adam, followed your advice, and bought the DeWalt goggles because I also wear glasses and they felt super good when I put them on.

@jfrawley1982 4 года назад

Sound advice, sir. This needs to be said more often, kudos to you for recognizing that.

@bandwilkalviwilk8437 3 года назад

Bought them after watching this. I have BIG glasses . And these fit lovely in fact they feel really nice . Now I can't wait to need to wear them !!

@evanjones4671 3 года назад

I've had these same ones for years! Love these ones. Definitely a life saver

@topcat1tanks 4 года назад

Thanks for the video. I went on line and Amazon had the Dewalt goggles on sale. They came today and are great.

@douglascampbell9809 4 года назад

Side shields and impact rated glasses Adam. That way you are always wearing your safety goggles. I worked in a furniture manufacturing plant for 8 years.

@d1663m 4 года назад

My pops worked on a shop floor all his life. He had the side shields and safety rates lenses, too. As long as they sit up on your face they're fine. He still managed to get the one wayward chip to land in his eye. Came right in from the top. It was easier to remove because it had lost all momentum by then and basically fell in but those are still no guarantee. Goggles look like better protection to me.

@TheRavenCoder 4 года назад

Prescription safety glasses aren't too expensive of an option either. Wearing safety glasses or goggles over my eye glasses always give me a headache, so prescription safety glasses are a lifesaver and provide decent protection for most situations.

@srwapo 4 года назад

@@TheRavenCoder It took me way too long to get some proper ones. I didn't think it worth the expense as I rarely wore them, but now that I have nice ones, I wear them all the time. Shocking!

@moofie74 3 года назад

I'll go ya one further and advocate something like the WileyX wraparound prescription safety glasses. I wear them any time I'm on the flight line or in the factory. I've lost the foam gasket, but I bet that'd help with glasses fogging in the COVID times.

@jamalhussain9162 3 года назад

Bought a ski goggle hard case in order to store my Dewalt goggle and it makes it easy store on my tool bag and would recommend this storage method

@DrakeMagnum 4 года назад

I wear those SWAT type big goggles for working in the shop. They are not too heavy, but are rugged. They are super rubbery so they form to your head pretty well. I have a few pair so never have an excuse for not using them.

@gregthehitman12 4 года назад

Thank you for covering this, the amount of maker's on RU-vid that I've seen just not use them makes me feel sick.

@MetalT-800Skull 4 года назад

Totally agree Adam, I was cleaning my goggles yesterday thinking just how underrated goggles are. I had a piece of something in my eye for a week until it worked it’s way out. Never again! Wear safety goggles!!!!

@jeffreywilliams3646 2 года назад

Adam, thank-you for this reminder.

@SilasZoeBell 4 года назад

Safety goggles are a must! I had to visit the eye doctor before after getting a metal fleck in my eye. The eye doctor had to polish the rust off of my eyeball and it was not pleasant. They use numbing eye drops that work great, I couldn’t feel anything, but I could still SEE everything! At least, until I passed out.

@raymitchell9736 4 года назад

OK got 'em ... I could only snag 2 as that's all the seller had... I notice every time you make a tool tip the stuff runs out fast! Eyes are important, so are ears, hands, everything! Safety in the shop is no joke and I even keep a stocked fully OSHA compliant First Aid kit even though I am one guy in a *home* maker space. The best project I did was make a PPE and First Aid station that has all that stuff and it's near by the front door of my shop so it's the first thing I grab when I go in to do any work... Hope everyone stays and works safe in their shops . . . Remember the motto: "Be Prepared!" Adam, Thanks so much for posting this reminder

@tomfrantz 4 года назад

Just ordered 3 -pair. Great video. Agree. agree. agree. Love Harbor Freight ear muffs too.

@Ohio_etsu-masu 4 года назад

I own a pair of Carhartt modular safety goggles, have used them through service in a desert climate and in my "shop" with an angle grinder. Very pleased with those.

@shrx 4 года назад

I have those same goggles and wear them whenever I am cutting or filing or sanding to prevent dust and fragments from going around regular safety glasses. I find my eyes feel better the next day by comparison. I also forget I put them on and start looking around for them when I am about to cut something else only to find I am already wearing them. They are cheap and comfortable and fit over prescription eye glasses.

@AngateWier 4 года назад

Those are the goggles I have. I chose them because they fit so well over my glasses. They're awesome.

@dragoncracker 4 года назад

My favorite safety glasses story comes from my last job. we were all given a couple pairs of the same glasses. I decided to start decorating the temples on mine because I often misplaced them. The flip side of decorating them is production would often call me out if I forgot them while on call. Everyone had gotten so interested in the designs that they started to pay more attention to safety equipment.

@killerdustbunnies 4 года назад

close fitting squash glasses are my favorite for working around the shop. I like the comforte and the impact resistance

@DeadCarl1831 3 года назад

Adam, these are awesome. Finally a pair of eyepro that fit properly with glasses and don't fog up. Thanks!

@steelfox13 4 года назад

I've got the same set of DeWalt Goggles! They are the best I've found for keeping sawdust out of my eyes.

@Clockwork_Planet 4 года назад

Makes it look effortless. Always good.

@tuxedoinn 4 года назад

For keeping my Optivisor or Safety glasses dust and scratch free I use the cloth pouches that new sheet sets come in. Most times they have a Velcro closure, they are washable, they are durable, and they look luxe in the shop!

@jesseobrien5864 Год назад

What's up Adam. I didn't realize you had a channel. That's awesome. I caught Covid19 and am here looking at Face mask, goggles, et al. Love n Respect from Portland brother 🙌

@mikejacobson7702 2 года назад

Bought the KORE Ballistic and ansi rated shooting glasses and so far love them. They have magnets that secure them on a sleeve or in your pocket. Also the strap to use to hold them to the visor. They say they are superior for using at the range. They are now my everyday sunglasses… better then my Oakleys.

@mephustowest1876 4 года назад

I have done, almost, the exact same thing with a piece of steel and the swarf hitting my eye. It is not fun at all so that is why I always wear the proper eye protection. I try to teach my children the same safety and this video helps by showing that it is not just their dad saying it. 👍

@bandwilkalviwilk8437 3 года назад

Omg saw this because I have Big glasses, got some and they feel so lovely so comfortable and fit lovely over my big glasses.

@johnredmond7489 4 года назад

Thank you for bringing these goggles to the foreground!! I live in Australia, and recently got into Gelsoft (Airsoft, but with 8mm orbeez because pellets bad) and was having a hard time finding eye protection that works with glasses. I came across these at the hardware store, and immediately tried them and they fit so well and aren't super obtrusive, easily the best investment I've made in my sport. Now I just need a second pair that I can modify with a mini fan for during the game...

@Ultra-Collector 3 года назад

You think they can take a 400fps airsoft hit without damaging them? If possible please test them out and post a video! I’m dead serious, if you do i’ll buy and ship you an extremely cool gel blaster!

@nighthawk9264 4 года назад

That experience you made, I made when I was 5 years old. We had a workshop in kindergarten and we just build stupid/funny constructions with wood and nails. A tiny bit chipped of from the nail and hit me in the eye. It was a nightmare. They had to remove it with a very fine drill and something like a high tech dremel. You can imagine how a 5 year old feels when he sees a drill coming towards his eye and is told to hold still...

@jimgoodwin6440 4 года назад

Yep. I like those. I find when using an angle grinder, the cooling fan in the tool sometimes blows air right at my face and regular safety glasses will not stop the air from swirling around the edge and carrying stuff into my eyes. I even use those when mowing (riding mower) for the same basic reason; light dust, grass and wood particles get kicked up into the air and the air swirls around regular safety glasses. Goggles work much better.

@johncage5368 4 года назад

I'm very glad your eye wasn't permanently damaged. We love you. Stay safe!

@HazDaGeek 4 года назад

Two pair in my place. Lost use of my right eye when I was 7 years old. I do NOT slack on my eye protection! The Dewalts were my favorites in recent years.

@JimOHalloran 4 года назад

For years I'd mark stuff out, then take my prescription glasses off and put safety glasses on to make a cut. But I wanted to improve accuracy, which meant being safe, AND being able to see! Settled on a nice pair of Bole goggles which I really like, one of the best shop purchases I've made.

@MaxGoddur Год назад

Ordered a pair today can't wait to try them out.

@jamesclark9746 4 года назад

Finally some goggles from a certified glasses wearer! WIll be checking these out asap.

@backpacker3421 4 года назад

The goggles that fit my weird crazy unique face/head: those exactly Dewalt goggles. I've been using them for about 6 years now. I have others, but it's long past time to donate them, because I never use them after getting the Dewalt pair. Very comfortable, full protection, never fog up.

@micahsmadness6981 3 года назад

Working in an entertainment shop in Las Vegas for 12+ years , I use the same dewalt safety goggles. The only downfall is they have little air vent slits on the top and bottom to prevent them from fogging up. Many times I had debris come in my goggles so...I ended up sealing them with tape and now nothing gets in. Great goggles over all! Would recommend

@RaccoonEatingCacti 4 года назад

Yes, a hundred times, this. I wear safety glasses when hiking, also. Caught a branch in the eye about three years ago, still hasn't quite healed. Jumped right under my glasses. Use a fume extractor when soldering/welding too! Or at least use a fan.

@kurtcraig3421 4 года назад

the first word of ppe is personal for a reason. every piece of equipment should be a personal fit for your requirments. one does not fit all. your boss should provide you with a variety in all forms of personal protective equipment. this is written in law. great advice again adam.

@jimpenix1029 4 года назад

I used those same goggles when the general contractor of the job i was on required more than just side shields on my glasses. Fogged up too much for me but i was doing construction in the summer. They are very lightweight though.

@agentspooky77 2 года назад

As a wearer of prescription glasses, fogging goggles have been the bane of my existence. After watching this video, I immediately bought not only the goggles, but also the protective case. I can't say they're perfect, but they are by far the best goggles I've used in my 40+ years of making. Thank you, Adam, for making me aware, and Dewalt for the excellent product that will hopefully last me for years to come.

@sanansa4567 2 года назад

thanks for the review. I wanted googles to fit over my glasses for riding a motorcycle (local joy riding at low speed). I didn't have anything and then the last ride a small pebble got kicked up and went in my eye. I researched so many google options but I read a lot of negative reviews (too small, obstruct vision, fog up). these look nice and comfortable and also the best part is the price (it's worth for me to order / test out).

@hellsson1996 4 года назад

It's crazy, I just got my new DeWalt Safety glasses in the mail yesterday. I don't need glass covers, but I got them becasue they are "fog resistant". I visit automotive factories frequently and having a nice set of safety glasses is a real plus. Some of the cheap ones they supply are really sucky and now that we have to wear surgical masks the fogging is a real pain. The importance of protecting your eyes can not be over stated.

@Andrewe1 4 года назад

Thx for the recommendation, I just got mine after watching the video...best safety googles I've ever had! I also wear glasses so these are amazing. I got them for woodworking but the seal is so good that I just might wear them outside for covid protection. Thanks!

@JasonMcGarvey 4 года назад

Those Dewalt goggles really are the best. I use them with a 3M half mask respirator and they are super comfortable as goggle and masks go. I wish I had started wearing them earlier in life for painting and cutting, but better late than never.

@btd2516 4 года назад

I've always worn safety glasses WITH side shields and found them to be comfortable and also had some air circulation so they didn't get as hot as goggles.

@ziggystardug7154 4 года назад

I was at the eye doctor a few weeks back due to a stray splinter of wood, now wearing my new goggles whenever I should,

@speedwaynutt 4 года назад

Adam Please be careful we don't want a lose you anytime soon and we worry when we hear and see you hurt. Your our own superhero.

@csn583 4 года назад

Some parts don't grow back! Never compromise on protecting those. I was once cutting the exhaust off my car with an angle grinder, wearing the standard blocky safety glasses with side-guards, and a hot shard found its way in anyway. Sometimes there is no replacement for sealing to the face! Only time I've been to the doctor for a making-injury, and fortunately it turned out my cornea was just burnt, nothing left behind embedded. Another time I was shooting a brad-nailer into the edge of some MDF ...upwards ...and I was above it. No safety glasses like a fool. One blew out and I got pelted in the eyes with what turned out to be wood bits, but later found the nail lodged in the ceiling drywall! I still have that nail as a reminder. As we say in the motorcycle world (at least those of us who both ride fast and continue to have skin), All The Gear, All The Time folks!

@4EntertainmentOnly Год назад

I love my googles. I barely use it...but I use it under the car. I like how the dust doesn't go thru the side. I'm finally taking stagecraft...and one of the PPE is googles.

@lo9thex 4 года назад

Im glad you are ok Adam you’re the best

@verdantpulse5185 4 года назад

Safety glasses saved me an eye. Drill in a drill press snapped, raw end punched the center of the left lens, bounced up from the floor before I had time to blink. Factory rules that I was wearing specs, but it made a convert of me.

@alwaysfallingshort 4 года назад

This channel is such a treat. I think I'd still be star struck, but don't you just feel like you know Adam? I think it'd take very little time to just fall into a normal friendly conversation with him after the celebrity wore off. I think the desire to learn from him would quickly overtake anything else. Really sad about Grant, as I'd always assumed I'd be able to talk to him about re-designing wheelchairs, but I still hope I get to pick Adam's brain someday.

@davisdiercks 4 года назад

I have a pair almost identical to those made by Uvex, got to keep them from my college chem class and I love them

@pawpawstew 4 года назад

The two most important lessons I've learned today (1) - When searching for Adam Savage's videos, spelling is important. "Adam Savage Testes" doesn't necessarily return the same search results as "Adam Savage Tested" and (2)- Good safety goggles are worth their weight in gold. Adam, while you're at it, check out "RZ Masks". Good stuff.

@kimmy_future4265 4 года назад

Honestly, a basic 3M full face shield has been my go to for years. Works with glasses and when i put a respirator on i have no issues with it.

@Ontheroad13 4 года назад

Could not agree more about a sax mouthpiece!! I absolutely love my 4C

@Raccoonsareawesome 4 года назад

Regarding being lucky. I have used angle grinders a lot during the years, both at work and hobby like working on cars. I have always used googles like the one you (Adam) show here, both for grinding discs and cutting discs. Last time I used an angle grinder I used it to cut of a rusted fastener on a car with a thin cutting disc. This time I choose to wear a full "face shield" because it was close. This was also the first time a cutting disc exploded and most of the disc hit my "face" or in this case the mask. So just a tip for people using thing cutting discs, of course it's most important to protect your eyes, but it can do a lot of damage on other parts of your face too so wear a full "face shield"

@phasmata3813 4 года назад

As someone who spends a lot of time on the water, the advice in this video is also absolutely applicable to PFDs (life jackets). They can only save your life if you wear them, and so many people don't wear the ones they have because the ones they have are uncomfortable. It is so important to find one that is comfortable because once you have a PFD that is comfortable, you are a million times more likely to actually wear it.

@NomadUniverse 4 года назад

My foreman once had a chip bounce in over the top of his glasses and fuse his eyelids shut. But typically we had no incidents with the wrap around style the company provided. I've never had an eye accident at work but once got superglue in my eye gluing up tyres for RC racing.When I peeled back the tyre to drop superglue in between it and the rim, it slipped from my thumb and the surfaces slapped together and shot the glue straight at my eye. I got very lucky in that the anesthetic and dye they used washed it out seconds before they were about to scrape it.

@jamesbarisitz4794 4 года назад

Great advice. I prefer a full face shield. It stays fog free better than goggles. It's offers some throat protection. It's also polycarbonate. I can fit a dual filter 3M mask underneath it as well. After having a sliver of railway removed from my eye with a rotating Dremel style magnet at an ophthalmologist as a child while vacationing in Paris, I can say that eye protection and lung protection are the best shop safety devices you can spend on.👍

@michaelwilson4339 4 года назад

I have been using SoundVision Eye Protection . They are designed to work with ear muff style hearing protection.

@MaxWattage 4 года назад

As a machinist and glasses-wearer, I really wanted to give this video more than one thumbs-up. Eye protection is very important! Leave wearing eye-patches to the pirates.

@andrewc9790 3 года назад

Pyramex Venture II are my favorite safety glasses. Super cheap super comfy!

@LooseGoose1024 4 года назад

You had me at "fits over my big glasses."

@DancingSpacePotato 4 года назад

As a ( former ) gigging trombonist I’ve always subscribed to the method of “if I find a piece to the hard machine, ie any part that goes in or on the trombone or replaces a part of it, that works better than what I have now I spend time in the practice room to find out what can achieve the same result by simply improving the soft machine ( me ). There’s a difference here that I don’t need to spend another $300 on a mouthpiece if I can just practice my craft, but you do need to spend $15 on goggles if your current ones don’t fit or are scratched up. There are grey areas, but generally a musician can achieve great flexibility with simple tools most of the time, but a maker has a much larger tool box and needs more specificity

@TheChiefSmeg69 4 года назад

Well as a glasses wearer and hearing aid user I ended up biting the bullet and buying prescription safety glasses , there was just not enough room behind my ears for the arms if any over specs - these look pretty good though and for the price you cannot complain. Thanks for the tool tip!

@themaninthesuitcase 3 года назад

I’ve been through a whole bunch of goggles that don’t fit comfortably over my glasses. I’ll be grabbing some of these to try today, as of course I don’t like mine so I don’t wear them.

@hitman036 4 года назад

As a glasses wearer who has a pair of these, I can attest to how nice they are. Adam’s 100% right about them. They’re comfortable and cheap, and fit over my glasses really well. My only real complaint is that they do sometimes like to take my glasses with them when I take them off, but that’s a minor inconvenience.

@ypaulbrown 4 года назад

Outstanding Adam!!! Thanks

@kevinbarnard3502 4 года назад

You can get shields for the earbows of your glasses that are shatter resistant so you have total wrap around coverage of your eyes while still wearing glasses but without the pressure on your nose.

@billjames1953 4 года назад

I use the dewalt safety glasses (not goggles) all the time, both for the safety aspect and because I get the bifocal ones. I work in a lab deprocessng integrated circuits. So everything is small, the magnification the bifocal gives me helps out a lot. I have the glasses straps on them. There are two pair on my desk at work, one pair on my desk at home and another tinted pair at home for working outside.