No video :(

Adapt Super-Flex hose to TIG welder with European style, M16x1.5 connection.

Подписаться 188

50% 1

If you have a TIG welder with a European style hose and M16x1.5 connector, this easy to make adapter will open up your options for 17 series hoses. The barbed adapters used in this video were found on Amazon.
Search for Joywayus-Fitting-Adapter 3/8 barb by M16x1.5.

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@budmanzoom4441 8 месяцев назад

FYI - BIG thank you again! I bought the two Amazon M16x1.5 x hose barb and it only took about 20-30 minutes start to finish. They work fantastic and your engineering saved me a ton of time and money. I installed a 25' CK SuperFlex so I can work on my boat without having to move anything. There is a site that sells these but you wind up paying $55/ with delivery. 👍🤠👍

@magpiethriftadventures2660 Год назад

Nicely done and informative tutorial

@dougekren6495 Год назад

The ideas are endless, very many other applications. Thanks

@budmanzoom4441 8 месяцев назад

Thank you!! I am going to do this for my Eastwood TIG welder so I can put the CK SuperFlex power/gas cable on it.

@callmemike6171 8 месяцев назад

I looked up a couple Eastwood examples and it does look like the same connection. Search Amazon for Joywayus Fitting Adapter M16×1-5 Female, and it should return the one I used. Sold in pairs. Good luck and Thanks!

@jamesbec9224 4 месяца назад

Do ya think this will work for a yes welder tig 250 p

@callmemike6171 4 месяца назад

The blue color TIG-250P appears to have the same M16x1.5 connection, so it should work fine. Keep in mind, if you are not running a foot pedal, you will also have to mount a switch to the torch.

@jamesbec9224 4 месяца назад

@@callmemike6171 I just found they out. I ended up useing a power block it fit nicely. I guess I’m going to be in the market for a hand control. Any ideas?

@callmemike6171 4 месяца назад

Assuming you have a 5-pin connector, Eastwood has a replacement for $21.99. Hopefully, with the same thread and pinout. www.amazon.com/Eastwood-Welder-Trigger-Replacement-Connection/dp/B07PWG726F