Adjustable Ring Angle Mount Installation 

Looked all over the place for a tutorial on this and found This Guy who has less than 5k subs and best tutorial on the web and it comes with a victory dance... Heck yeah!!! You are the man! Thank you.

We ended up exchanging this model for the slimmer version ru-vid.comUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU because it was too wide for the only door trim area that made sense to mount it on. However, we should have just noted the dimensions prior to purchasing. Otherwise, we love the doorbell. It works perfectly, and the video is very clear, even at night.

Writing a review to shame Ring for not including a 55 degree angle wedge in their packaging for those of us that have doorbells on the side of the house. The video was very timely and well done. I bought the mount from eBay for $12.49+tax and FU Ring for not including and also not advising us of the corner kit bracket.

Thanks, Guy. I was ready to build a bracket to hold my Ring since I have an unusual doorway with no surface wide enough to mount it facing forward. Great solution. Going to the Amazon now to look for the bracket.

Great tutorial! And detailed enough for my folks to follow. Just sent this to them. Thanks for the part link!

This was quite helpful. I was putting off the purchase because I wanted to hardwire the doorbell but was unsure about the angle. I found the included wedge to be sufficient but not quite where I wanted it and of course didn't even know about the adjustable wedge until this video. Completed the install in minutes.

The dance moves made me thumbs up! Thanks for the video!

I didn't make mine flush with the siding because I needed it to cover the old screw hole. I ended up using two 2" screws, which worked and I turned the bottom angled piece around and lined it up with the top piece, worked good 'nuff for me! Good vid.

Dude, thank you so much for the video! I saw a bunch of videos on the angle mount but none were addressing if it solved the problem of the 90' angle turn. Thanks!!

Thanks brother! I knew i could find a helpful video to do it exactly how I need it! 👍🏽👍🏽👍🏽

Not That Guy - This Guy, user friendly video, thanks 👍

This video is exactly what I was looking for. Appreciate it!!!

Good video. Thanks for showing the view at the end. Also; At the end😂😂. Get it get it!

Love that sign! I need to get it. And thanks for the video

Cool....Just what I was looking for! Thanks!

Good video, but a correction on your hardwire detail, as Ring say is correct it does not matter which wire goes into the back screws, WHAT matters for your existing doorbell chime !! in the house to Ding-Dong is, the settings In The App/Account on the section of when it asks about wiring to an existing doorbell, meaning, after you install it , you go back into the app and make the selections so it ding-dongs when you press the bottom., given you have a mechanical-common doorbell at the house with the strange looking transformer some where inside the garage wall or ceiling. Hope this helps for the ones that missed it first, and it didnt dingdong and had to ck with Ring to fix it.

Lmao, the happy dance at the end. Best video. Thank you!

Super great and helpful video. Exactly what I was looking for. A real step by step, how to video. Tx's so very much.

The unexpected dancing at the end was the best 👌

Got a Ring for Christmas. This just solved my issue. Thanks 👍

Exactly what I need! Thank you Brotha!!

Nice work This Guy, just what I needed to know cause I have a similar problem, thanks for the fix. 👍👍👍👍👍

Thank you so very much for this video and idea!

Great video,well done.I'm off to Amazon to purchase the mount.

Hi, Thank you for sharing. My door bell will not ding any ideas of where to look to correct this?

Great video. Thanks!

You answered all my questions, the dance the wife liked....super Infomation

Great video. How sturdy is it. Do you think over time of people ringing the doorbell that the angle will change or do you have to push really hard to make those screws slip?

Super! Thank you very much.

Kool info and the best part the beer 🍺 at the end cheers mate

Ok, this was really helpful thank you, the last dance not withstanding :)

I like the dance ending!!!😂😂😂😂😂

Ok question. I have somehwhat of a similar situation as you, But I can see almost all of my driveway. I want just a slight bit more angle so I can see about another 4ft of my wall. That way I can see my side gate as well. Would aIbe able to use just the angled piece that come with the Ring? Or would I have to use the slanted (leveling) piece as well? The Angled piece would work perfect. But I don't want to drilll 2 unnecessary holes if it wont work. Appreciate it in advance.

Thanks. This was very helpful

This guy is so cute :D Thanks for sharing!

You are hilarious and thank you 🙏!!!👌👍

Good job, good video!!!

Thank you!

Nice video.

Thanks ... Exactly what I have to do.

Thank you for this appreciate it

Thumbs up just for the dance at the end...😂😂😂

Super helpful!!

Yep. That ending was hilarious

Great video, I just got this yesterday and plan to install it in the next few days. Let’s talk now that’s it’s been over a year later since you installed it. How is the mount holding up? Do you find yourself having to go back and tighten it a lot? When you push the button, is there a lot of give or is it solid? Thank you

cool exactly what I was looking for your awesome

love this solution!

Thanks this solves a problem. One question. I have stucco so do I need all of the brackets you used?

Awsome!!

Thanks!

Thanks so much!

Hey this guy. I'm getting the Pro doorbell. Do you know which company you used for the adjuster and if they have a mount for the pro version you'd recommend? Awesome video

Excellent DIY video. Please provide the part name and number of the angled bracket. I figured wrong that you would have it listed in your video summary. Please advise asap. TFS

Do you know if the ring doorbell Solar panel attachment would work on this? I’m talking about the one that actually mounts behind the ring doorbell camera

Wish the lighting was better for the install portion. Thanks for the helpful video

THANK YOU VERY MUCH 😇

I would be changing them top and bottom screws for the angle for a torque screws that match the ring cover

Awesome video! I have the same issue you had. My door bell is facing the wall, I have a ZMODO door bell camera, do you know if this bracket you installed fits the zmodo door bell camera? TIA

What kind and size of drill bite did you used to make the new wholes on the angle mount ?

Does the wedge work if you needed it to face the ring in the other direction? In other words, can you angle the wedge in either side?

How can I get an angle like yours but also face down? I see angle face down only but I need one with side angle like yours and also angle face down. My door bell to up

Thank you Sir👍

Kirby! I thought they went out of business.

2 questions...1. Where did you get your shirt? Yay Fideo! 2. Did you cut power to your doorbell before you did this? I have turned to breaker off and all of my outside lights & outlets turned off, but the light to the doorbell stays on. ??

The dancing at the end secured the thumbs up😆😎

THANK YOU!! I had the same dilemma before watching this. #2thumbsup

What kind of longer screws like your using would i use on regular siding? Also can u please, please post the amazon link for the adustable extender mount you are showing you used here? I have the same problem..ugh..side doorbell..here's looking at you wall!!! hahahaha Thanks for the video!!

Will this adjustable wedge work with a Ring 3 Plus unit? If not, can it be modified to work?

When will they make a model designed for the side wall installation. It would be streamlined with the camera lens and motion sensor on the side of the unit. I think there is a big demand and would look very nice. I'll wait until they invent it.

Great Video but will the adapter work for Ring Doorbell 3.?

Entertaining video. Any regrets since the install? Sure seems tempting for someone to try and kick or just grab and rip at it. Found a nice 45 degree recessed mount on AMZ but it's $36, yikes. That's a gnarly hairdo on that mole on your left arm, you ever braid it or do fun things with it?

Has you a video for aplication and what i have to conect to the other side of the wires?

Will this work for a side mounted doorbell at the top of stairs?

Not that it mattered for your end result using this additional adjustable bit, but the ring wedge was installed backwards. The flat side goes against the wall. It is confusing as the product images they show is of the back.

I fancy a Ring doorbell and would need the mount for my porch. But, I always see these Ring doorbells and think how are they not stolen. It must be so easy to rip this straight off the wall or door and walk away with it. Yes, ok for a point you're on camera but if I'm wearing a cap and have my face covered you have no chance knowing who stole it. So, the question is how secure are they from this happening?

Great moves lol

Do you know if there are any made of metal?

I was wondering if it would be compatible with ring doorbell 2020?

What if the doorbell is on the right of the door, could the mount and wedge just be rotated?

Great video, but you didn't show how you connected the wires?

Which brand is this? CAVN OR Kimilar? Or something else?

I originally installed the Ring Pro. However after a few weeks it began to have issues with the original doorbell transformer (not compatible) so I switched over to the basic Ring. The basic doesn’t provide the viewing features of the Pro. Anyone out there know what transformer I could upgrade to? My present one is class 2. Thanking you in advance.

Great video, but you should consider some lighting. The entire mount looked like a big black blob.

What was the song at the beginning? I know I know it, I just can't remember it for the life of me!

do you know how to fix a glare during the day time

Can this be flipped for the right side of the wall?

how many degrees is this angle mount?

Did you turn power off?

Can it be used for a ring 3?

So moving the doorbell location (which I assume means rewiring) is too difficult to do? - Asking with no knowledge

can it fit for ring 3?

SUBBED FOR MOAR DANCING

What drill bit did you use at 3:10 mark?

Lol@ that dance

And flyer stuffers, I need to see who these people are, they roll up flyers and stuff in your door! They gave you all that in the box? Why can’t I find a wedge angle for the new 2021 wired ring! Help!

Lmao omg you have the same setup as my dumbass house. Good video

One kick can destroy all (rings) but nice angle.

I don't have a doorbell I hope I can do this lol

Mine didn’t come with a wedge. My siding is small which leaves a gap on the middle of the cam

Thumbs up for the dancing like a moron moves, cause that's what I did when I set up my cameras. 😂