Adjusting Bolt Cutters 

People bad mouth social media but I have learned to do and fix so many things on RU-vid. Saved money and a lot of frustration!!! Thank you!!

Thank you....Buying bolt cutter few days ago, and just saw your video....

Thank you so much for helping me adjust my bolt cutter.

Was searching all over for a video and found you. Thank you for helping me fix my gap problem

Bought a pair of bolt croppers with 5 points of adjustment, and you just saved my sanity.

Thanks for putting this online!

Thank you. I have an Anvil 14" that wasn't cutting as cleanly as it used to, this fixed it.

i have the same cutters and needed that exact info today. Many thanks for helping me out.

I bought a 12 inch cutter from Harbor Freight. I used it like a maniac for two days. Then, well, it lost its chopping power. But this video explains how to fix it. It's a great help.

The bolt under the adjuster should be loosened before you turn the adjuster bolt, because it locks in the adjustment when it is tight. Then tighten it up after your adjustment. It will keep you from having to twist the adjustment so hard.

Exactly what I'm looking for. Thank you!

THANK YOU! Just bought my first of the exact same cutter and it was totally Greek to me!

This was incredibly helpful, thank you!

Nice instructional video-thank you.

Thank you for sharing, greetings from Ecuador

Great information! Thank you!

Thank you! You showed me how to remove gap.

Im planning to buy 12 inch bolt cutter.thanks for info🎉

Thank you!

Excelente muchas gracias.

Is there any way to get the cutter to open wider ? To cut a thicker spoon for example. Asking for a friend

Thank.you.both.of.you

Thank you so much.

Awesome! Thanks!

Tegnap vásároltam egy Extol craft 600 24" szerszámot. Sajnos nem értem az angol beszédet, de talán segített így is. Thank'u! 👋😁

thanks for showing.

Thanks very useful

Thank you.

Thank you very much ! Very helpful.. easy to understand for the beginner like me.

Sweet 👍🏻 👍🏻

Noooo! My beautiful world war II spoons!!

Thankyou

thank you

hola muy bueno el video tengo el problema que se desalinea las punta o cuchilla y si lo dejo medio flojo para poder abrir se desalinea y si lo apretó mucho no puedo abrirlo no encuentro la solución

I'm glad you didn't see any air. lol

I have a vintage pair of HK Porter number zero, and number 14 cutters I’m going to restore. And how exactly do I adjust the colors on those older ones?

Thanks

Space between the blades is normal not to damage them

What is the inch of this bolt cutter?

Can u adjust how fair they open up or not

Those are nice spoons that you were wasting

You can learn,be able too,,..... .

Big ass help

How many inch

I’m here to try and find out why your cutting the ends of spoons off in the first place 😂

Рахмет хоть кто-то обьяснил доступно

I know this is an old video but I have to tell you, you are using the wrong tool, to cut your spoons. You need a sheet metal shear. The spoons are a little thicker than what you may consider sheet metal but that is what it is. Bolt cutters are not made to cut sheet metal, that is why you are having problems, with them. Specifically, you want a bench mounted, long arm, sheet metal shear. 😁✌🖖

name ki😊

At first I thought those hands belonged to a lady😬😬 Loll