AE Error Code Lg Washing Machine Error . Step by step tutorial on how to fix AE Fault , AE error code on LG Front Load Washing Machine. Applies to most LG Washing Machine models, its the same system in them.
Thank you!! I had a panicked moment thinking my clothes were all locked in and this solved my issue. I’m 99% certain it was caused by my cleaner who didn’t close the drain cap correctly after cleaning, it resulted in the washing machine leaking on the outside, so inside makes sense too with the seal not covering inside if it isn’t fully closed. I can not afford a call out right now so being able to ‘fix’ it even if it’s only temporary is a big relief!
Thanks so much, solved the wrong code in 5 min according to your video. Very easy to follow your instructions. Think the code or the water came because the dampers are worn (ordered new 5 days ago) and today I got the AE code wrong. Now it works again, did not look for dripping water as I know that the dampers are the cause (lowered the centrifuge speed to 600-800) and there were some extra small stones and other shit in the collector. THANK YOU SO MUCH AGAIN!
GUYS for This who have the 10,5kg Maschine without this shelf: try pulling out the washing powder compartment and clean it AND Lift up your washmashine from one side and let all water come out. IT WORKEDD
Hi Mr Washy Washy, your video is the best by explaining what AE actually is. Unfortunately, mine is a LG Top Loader 10.5 KG. The bottom part is very different. If you have a Top Loader video that show how to fix this AE issue will be life saver. My country is on lock down. Electrical service shops are all closed... :(
Thanks so much for this video 👏🏻 You’re a lifesaver!I managed to rescue my laundry and at least complete the washing cycle without it trapped inside the washer!
Thank you for this video. I can now add washing machine repair to my mum/wife resume. I suspect I need to replace my float sensor as the contacts appear to have some corrosion and is still tripping even when the float isn't activating the switch
Thank you so much, because of you now I can add washing machine repairer on my resume 😊 I followed exactly your tutorial and it was a gem Thank you thank you thank you for saving me dollars
Hi there, this video has been super useful to see where the leak is, but I’m not sure how to fix it and what the problem is with my washing machine. There is a leak from just above the mother boar, leak from the plastic material inside towards the front that is the same colour as the mother board.. could you please help Me? Thanks a ton 😊
KAREN FASHAW VERY WELL DONE BUT I HAD AN AE ERROR CODE BEFORE AND I JUST SIMPLY SWEGG THE HOSE BACK AND FORTH IT WORK FOR A COUPLE OF YEARS NOW IT IS BACK AND I THINK I NEED A REPAIR SEEING WHAT YOU HAD TO DO FOR AN AE ERROR CODE
@@karenfashaw8926hi sorry I’m having trouble finding your washer model. Ok Samsung Ae means there is something wrong with communication between the main board and display. You need to make sure all the wiring connections are intact and check if there is any water that has entered the wiring.
Hi...my washing machine shows the ae alarm, i've tried draining the stagnant water. but when restarted the washing machine won't turn on and there is still a code AE. What must i do
I have an LG washer dryer that does not have this front panel. The AE error keeps flashing I tried draining the machine from the little front flap. Some water came out but the error persists. Any suggestions to help with this?
Hi it’s because it’s detecting a leak somewhere on the washer. There is a sensor on the bottom/floor of the washer the detects water. You need to remove the back cover. Start the wash and have a look at where the leak is coming from once it starts washing. Be careful and don’t touch inside the washer as the power is still connected. Look for the leak then turn off unplug and confirm the leak
Hi! Opened up the panel but didn’t find any leak or pooled water. Tried detaching the cable from the sensor then back on again, however the AE problem persisted when I replugged the washing machine. What else can I do? Thanks.
it will reset one the water level from the leak has dropped. you can tilt the washer to one side that will drain out the leaked water and it will reset.