I got my DonnyFL Great Kami from you today, very fast, Thanks! I ordered a Hammer Carbine from Pyramyd, but it's on backorder. I'll be ready when it gets here!
Im getting more and more interested in this line of airguns. I basically have every niche filled when it comes to pcp's. Semiautomatics, lever action, repeaters, long guns, bullpups, pistols, carbines etc... but no big bore, .25 is my biggest caliber right now. Im looking for a deer gun for deer hunting in Missouri
You are also wrong. 4500 psi is not 310 bar. It's 310.264 bar. In usa we say 4500 psi fill or 300 bar. No need to mention that tiny 10 bar which is really nothing. It's easier to say 300 bar fill.
@@johnrambo1349 yeah I didn't think the .264 mattered nearly as much as the 145 extra PSI. I didn't mention three decimal places 10 bar or 145 psi is quite different. I was just trying to clear it up considering he mentioned it multiple times trying to correct misinformation. It wasn't meant to hurt feelings I just figured during a correction 145 psi might matter. See what I did there? I rounded the number again slightly I used 145 instead of 145.038. I hope you feel better about yourself though knowing you got to correct somebody today on the internet over discrepancy of less than one PSI.
@@johnrambo1349 hmmm my gx el-03 air compresser says 4500 psi and goes to 320 bar. so really are any of us correct? or is bar subjective to the tempurature and pressure of gravity on it at thatmoment? has anyone else heard more detailed specs on this sonic air rifle , or not. sounds like another challenger to me if it only fills to 4500psi, because my challenger does that easy as long as it is not using the regulater. it is that internal reg that blows its guts out when it gets over 3800 psi that should be able to work at 4500 psi if you ask me. along with a real 7k fill, but if bin says it is not 7k i have to assume bintac is lying again. like always. said the new compresser is 7k too , so how is all that? gess it does not mtter.
wuldi be regulated or is that jut the first two shots at 120fpe smiles. and will it have a hammerspring adjustment? because if not, i believe i will just wait for the externally adjustable reg and hammersprin g challenger pro to hit everywhere. how is t gonna be that short with front and rear tanks , nt possible with front and rear 250cc tanks, s something is off there. even the 2mm 250cc tanks are too long for that to work. but those stats sound good do they not. i do not believe anything bintac says while he is cackleing like a insane person, i know he does that when he is lying it is his poker tell that cackle.
@@Onefromafar i am waiting for what is real spec wise. there are no sonic prototypes in the u.s. yet so anyone saying stuff is just saying stuff. and any time bintac laughs i know he is lying so yup i am waiting for the real and saving money so either way i will get one . just bought a challenger pro lb gen 2 from the pellet shop while i am waiting. it is .357 and hs adjustable reg an hammerspring and 4500psi fill with a whole crap load of shots. what more can ya ask for but that the sonic is better. but really do you believe it will be better, or .357cal? i honestly think it will not be. now if it is semi auto and has a higher value reg and fill pressure then we in business. course the terminater with a 4500 fill would be better wouldnt it if you add a reg and hammer adjust. bt really what we need on anything new is mags deep enough to shoot the weight we want to shoot. so that is what i am looking for. not some single improvement on a platform that still cannot hold a heavy slug as the big bore challenger. now if they make a challenger elite tac that is light as the challenger pro then we in business right. i have the challenger elite .51cal and it weighs 16lb which is a bit harsh and only 7 shots on reg, i turned mine down to 400fpe and get 18 shots but still. i am waiting for the challenger pro valve system and transfer port with the deep mag of the big bore made of metal and the weight of a regular challenge or hp max with a 4500 fill and a reg and hammer adjustment. and if it does not have all that, i am gonna cap for real and talk smack no one can live down. d you know whee i can get a tactical chassi for my challenger elite that is lighter? or the hammerspring adjustment parts for an old challenge pro? i even have a 500cc tank waiting for my challenger pro lb gen2 when it gets here.and i plan on using the old plenum as when i put it next to the 170cc it is a little bigger. so they are hypeing up that 170cc plenum. the old challenger pro plenum is a 200cc. i may even dual regulate using a internal and the external both. really depends on how long the tank ends up. but i have no way to make the mag hold a longer slug see. not unless i cut the plastic a bit for the slugs nose but gotta be careful with that.
@AIRGUNZ_MILITIA Gotcha yeah gonna wait on the Sonic but if it's cheap and does hit 120fpe in the short model I may pick it up because I'd love a short light bullpup unlike my heavy Bullpup Challenger I have.
@@Onefromafar true, smething short at 7lb is just a bit heavier than the challenger standards6.5lb but bing short it would be nice even at a hundred fpe.heck my challenger pro folds down to 27inches and gets 120fpe easy with a 50gr sug, if i put a 110gr hp in it single load it is like 200fpe. and that is the normal challenger pro. so i do not see why aea cannot put that platform into a stock that is bullpup like, course you know the side leaver is gonna be at the back cause aea don't know how to make it go frward like a avenger bullpup 2 does recently. but sounds reasonable. i rally dislike these current bullpup stocks cause they are heavier woods not beech or ash. and personally i like thestandard challenger weight and feel. it is easy to put felt around the barrel behind that spacer and make it quiet qwithout a suppresser so that length does not need to get longer adding a suppresser. see how that works? guess it really depends on the price, cuse if they can makea shorty that gets even a hundred fpe and fills to 4500(tht wuld put the sweet spot at 3800psi) even unregulated id buy , heck even with a bolt. case i learned that you can get a m6 50mm female threaded collarnut fr like $8 on ebay and it screws right onto the bolt handle replacing that plstic crap.and making the bolt fast as a side leaver. so really it all depends on what they end up offering and for what price. myself i am about to makemy challenger pro .30cal into a lb , already replaced the internal reg with an externally adjustable one by cutting off the piece of stainless in front of that bottom rail in front of the trigger gaurd. s my 52mm external reg fits easy.and when my pro lb gen 2 gets here i will trade the 350cc tank off it for the 500cc tank and take the 4 mags it gets stock to 6 mags. and get me couple of those .30cal challenger drum mags and put those on the .30cl and basically upgrade my old chall pro the same time i get the new .3577cal pro lb gen2. and i have my .357 big bore still sitting there, damn beast gets twenty shots in two mags ad does so well at 3800psi fill that i do nt feel the need toregulate it or buy the elite version. mine is the standard , i cut a hole in thewood stock to lighten it and fit the mags into the hole. and i made an integral supression shroud for it that is only 4 inches longer than the stock unshrouded barrel. i can explain how if you have any unshrouded aea m14 barrels. i got a parts list made up and it all pulls up on google easy. ijust hpe aea brings this sonic out by thanksgiving that is my birthday this year.
Must get clearance for 7K psi in USA. Then there could/will be 7K version in US. 4500K version in Us first AS STATED in the video I assume you are referring to.
Please keep me informed hope it comes in 35 Cal brought my aea 30 Cal SF from you guys I know what my next gun purchase is going to be I'll hold out and wait for it I was going to not buy another gun that looks very familiar to that one but you guys don't carry it and I like your customer service so I have not purchased it yet so this is great news. And just to add to it yes must be a semi-auto or full auto for the compact I'm really needs to come as the 35 caliber or 9 mm as people say
AEA got to step up their game. I accept no more than 1.5 inches at 100 yards. My 30 cal Daystate Safari does an inch or less up 110 yards with HatSan Vortex pellets.
@user-zn4tq6ib6r I wish that was true because I’ve called at least 10 dealers looking for a gun that’s more accurate. We practice shooting 30 cal pellets off bricks at 100 yards with our Daystates. A golf ball at 200 would be way too easy. . I thought my FX crown was unmatchable until I bought this Daystate safari.
My hp varmint 24" barrel .25 is 1 moa rifle, headshots on woodchucks at 100 yards + no prob, 50 yards shooting in my backyard it's pretty much all in the same hole,
Semi auto is much less powerful they use air to reciprocate the action. The side lever looks like it can be used with a two finger technique for around two shots per second. Not as fast as semi auto but pretty good. But mainly it's a different gun for different purpose
Why do we always get teasers about this particular air rifle. It's almost like a mystery and I get it that it's a prototype but it is a very cool looking prototype for sure. Everything else we get is just a repackage version of something that was out already and we get information about It over and over again, but on this particular air rifle is still like a mystery it's the Dark Night of air rifles right now. So I'm guessing in the US market is not going to be 7000 PSI Phil which was really interesting it's still interesting though at 4500 PSI.
@gagain100 and where are you going to get a compressor that will do 7000psi, and please don't tell me that little AEA compressor Bintac showed on his video. Also, who makes a tank that will hold that much pressure? 6000psi? Sure, nitrogen is that high. That's why people who use nitrogen have it regulated. That's the only viable way, right now. Even then, I don't want that much pressure under my face. But that's just me. I agree with @tommydaddio6724, DOT isn't going to allow that. Not until someone makes a vessel that has the 3:1 burst ratio and a compressor that will build that pressure continually without issue. So players like Alkin and Bauer need to jump into this with their commercial compressors, not a little mini unit that AEA wants to sell. I love my AEA rifles, but they just got their rifle quality down. They need to partner with a quality compressor company.
@@Monkeydad1969 I will tell you that compressor. I of course I can not say how reliable it will be but it does go to 7K. I would hazard a guess that 7K tanks will follow. I have an unregulated valve on my 6K nitrogen cylinder. I open it very carefully. no problems in 3 years hundreds and hundreds of fills. But of course you don't need a reg if tank is same pressure as the fill you want so what is your point on that? I think if there was a catastrophic failure under your face at 4500 psi it would be enough to be fatal. But only you can decide what you should fear. What insider info do you have on DOT? Please share. The end part of your comment is spot on
Side lever. You can see it above trigger. Semi auto is much less powerful they use air to reciprocate the action. Different gun for different purpose. This will come in up to .30 cal only. Which of course is cheaper than 9mm
KARMA SLS COMPACT OR STANDARD - The SLS features a switchable Side-Lever or Semi-Auto action. The SLS Standard is available in .30 and .357 calibers. The SLS Compact is available in .22 and .25 calibers. I guess I'll be waiting for this one instead. I have AEA HP MAX and need some options to go semi-auto with a flick of a switch.
I don't know why anybody like side lever better than the more ergonomic bolt action. I guess not old or labored enough to know about that thumb joint that tends to wear out first.
This isnt a review. Trade shows like this are only meant to introduce whats possibly coming in the future. Nothing is solid with the products in the works, we dont like to give out false information unless its confirmed.
