Тёмный

AFE Momentum GT Intake Install on the 2020+ Ford Explorer ST 

Lethal Performance
Подписаться 24 тыс.
Просмотров 20 тыс.
50% 1

Today, we install the all new AFE Momentum GT Air Intake System on Matt's 2020 Explorer ST. While his car already has a few bolt on modifications, it's time to let it breathe properly with a little help from AFE Power!
Required Tools You'll Want to Have:
- 7mm Socket or Nut Driver (For Hose Clamps)
- 8mm Socket or Nut Driver (For Hose Clamps)
- 10mm Deep Socket
- 13mm Deep Socket
- 15mm Wrench
- 20mm Wrench
- Small 90 Degree Pick (If you have an Orange PCV Connection on your Intake Tube)
- Hose Clamp Pliers (Highly Recommended due to the lack of space where needed).
Get your AFE Momentum GT Intake Below!
Oiled Filter: www.lethalperformance.com/afe...
Dry Filter: www.lethalperformance.com/afe...
As always, if you have any questions, feel free to reach out to us on the phone at 561-753-8105, through email at support@lethalperformance.com, or in the comments below!
#teamlethal
#lethalperformance
#afepower
#momentumgt

Авто/Мото

Опубликовано:

 

13 мар 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 31   
@TheTexican05
@TheTexican05 2 года назад
Big thanks to Lethal for the great customer service I received a week ago while placing a large order for a customer’s ST. Sales rep was ultra patient and answered all the (many) questions I had for the project. Very helpful video as well since this is a new platform for me. + 20 style points for referencing the Griswolds and channeling Cousin Eddy… ✊😎
@johngallo7383
@johngallo7383 2 года назад
Nice install! So...I looked you guys up and your 25m South from my house!!! I am coming to see you guys REAL soon! I just got a 2022 Explorer ST and I would like some items installed. You guys will be my new GO TO for my ST! Thanks for the YT Vids and you got a new subscriber/customer! 💪🤙
@RW-jg9zv
@RW-jg9zv 2 года назад
Clark Griswold would be proud, she is a beaut!
@6720arc
@6720arc 2 года назад
What happened to the video of the test drive??
@Drivin_Vibing
@Drivin_Vibing Год назад
Probably started throwing codes lol
@jamesdoyle3011
@jamesdoyle3011 7 месяцев назад
Do you have to tune the car if you add an intake?
@OFREI
@OFREI Год назад
Hey Jarred where do you guys do the installs? Lethal in Wellington or Palm Beach Dyno? Last time I stopped at Lethal it was only a warehouse with parts for sale. I'm asking because your video as easy as it looks, scared me without that tool...lol...anyway, need to get my Lethal purchased aFe installed ASAP...live around the corner...please reply...thanks!
@Lethalcamp
@Lethalcamp Год назад
TJ@WBA Performance here in Wellington helps us with a lot of our installs. He does a great job as well. Let us know if there's anything else we can help you with in the meantime and thanks for the support!
@donalds1728
@donalds1728 Год назад
For those of us with 2022 it doesn't have all the needed parts. We don't have the hose from the driver's side to the bov therefore it's missing a cap for that part.
@jshbryan
@jshbryan Год назад
Is there a part number that we need? Did I read you could just cap it off?
@knghts50
@knghts50 2 года назад
On the orange connector removal is there specific way you are pulling on it with the hook tool? I am installing mine on my 2022 today it has orange at both ends, but no sensor from what I can tell like the one in the video has
@Lethalcamp
@Lethalcamp 2 года назад
If you have no sensor, then you should be able to break the locking mechanism of the connection on the engine side. Although, if you wanted to keep the end intact, you have to spend some time around the edge feeling out the 3 tabs on the connector itself. You don't pull on it with the tool, the tool is simply to pop those tabs. You have to keep slight upward pressure so that the tabs do not reset as you are popping them.
@gjmrofchak1021
@gjmrofchak1021 Год назад
I don't get why you even have to disconnect the crankcase hose at the engine side. Can you explain why?
@kevinskonieczny8174
@kevinskonieczny8174 2 года назад
Nice install.. wish they had one for the 2.3T.
@6720arc
@6720arc 2 года назад
K&N makes a nice one
@eddiecoto9829
@eddiecoto9829 Год назад
I need one tooooo
@kimberlyfarr5058
@kimberlyfarr5058 9 месяцев назад
Hey guys, I just installed this the other day. I was wondering if y’all know the part number for the hose with pressure sensor? Mine doesn’t have the same sensor as the one you guys have. I have a one that isn’t a plug it’s a different connector… any help for this would be appreciated, thank you!
@kimberlyfarr5058
@kimberlyfarr5058 9 месяцев назад
It’s a 2020 st
@S0nicpeed
@S0nicpeed Год назад
What is the difference between the dry and oiled?
@Lethalcamp
@Lethalcamp Год назад
The oiled version allows for better flow and therefore, more horsepower and torque. The dry filter is slightly less efficient but requires no re-oiling or maintenance.
@brandon6098
@brandon6098 2 года назад
can you do an install on the FenFabrications high flow cold air intake for the Explorer ST?
@reyyrigo
@reyyrigo 10 месяцев назад
Did you have to disconnect the battery cable?
@Lethalcamp
@Lethalcamp 10 месяцев назад
No. While of course you could just to be extra safe, there's no electrical components messed with during installation that could be negatively effected.
@ryanbecker6094
@ryanbecker6094 2 года назад
available for the 2.3?
@eddiecoto9829
@eddiecoto9829 Год назад
I need to know that too
@SBHink
@SBHink Год назад
how long did it take to install?
@Lethalcamp
@Lethalcamp Год назад
With the filming, it took 2-3 hours. However, with just installation, it should take roughly 1-2 hours depending on skill level and tools. The trickiest part that may take longer would be the Orange PCV fitting (if you have it) and the connections on the turbos since they are a little harder to reach in the engine bay.
@SBHink
@SBHink Год назад
@@Lethalcamp thank you for the quick response.
@marcy-brooklyn161
@marcy-brooklyn161 2 года назад
😎
@johnprevite6673
@johnprevite6673 2 года назад
The throttle response is night n day better
Далее
The 3.0 EcoBoost | Common Problems & Reliability
10:15
Explorer ST CVFab Intercooler Install
31:04
Просмотров 24 тыс.
Explorer ST - MUST HAVE MOD!!! More Power and SAFER!!
13:55
10 DIY Upgrades | Ford Explorer
13:43
Просмотров 336 тыс.
Explorer ST S&B Intake Install
26:07
Просмотров 12 тыс.
что за звук?
0:15
Просмотров 1,9 млн