Тёмный

Afterburner KM RC Model • INSTALLATION in the Freewing Eurofighter Typhoon • (English/Français 4K) 

Arthur RC
Подписаться 4,6 тыс.
Просмотров 2,6 тыс.
50% 1

Thanks again KM RC Model !!!!!
www.kmrcmodel.com
Get yours at www.turbines-rc.com/fr/jets-e...
🔋 Buy your CNHL LiPo ➡️ chinahobbyline.com/?ref=I5Ew9...
🔥 Buy your Universal Afterburner KM RC Model ➡️ www.kmrcmodel.com
❌ Buy your Planes Stands here ➡️ www.4model.eu
🇺🇸 Hi folks 👋🏻🤠
Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot) 🙏🏻🥰
If you want to help me to expand my squadron 😜 or buy a specific plane to review, you can help me by making a small donation via my PayPal link www.paypal.me/arthurjanin?loc...
Thank you very much in advance my friends 🤩🙏🏻
🇫🇷 Salut les copains 👋🏻🤠
Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) 🙏🏻🥰
Si vous voulez m’aider à agrandir mon escadron 😜 ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal www.paypal.me/arthurjanin?loc...
Merci beaucoup beaucoup d’avance les amis 🤩🙏🏻
📸 Follow me on Instagram : / arthuraerorc
⏰ TikTok : vm.tiktok.com/ZMNYCqUhC/
You can buy my things here ⬇️
✈️ FMS planes & cars ➡️ www.fmshobby.com/FeYKZYrJINBwLe
🎮 Jeti Rx and DS16 ➡️ www.opale-paramodels.com/fr/ ‪@OpaleParamodels‬
🔋CNHL LiPo ➡️ chinahobbyline.com/?ref=I5Ew9...
✈️ Jets and more ➡️ www.turbines-rc.com/fr/?aff=4
🇪🇸🌪️ Freewing Eurofighter Typhoon 90mm EDF Jet PNP
1/11 scale
Wingspan : 1030mm (40.5in)
Length : 1450mm (57in)
Empty weight : 3124g
Weight of KM RC Model Afterburner : 22g
Weight of 2 tanks, 4 METEOR, 2 ASRAAM, 2 GBU : 177g
Flying weight : with full missiles, tanks + afterburner KM RC Model (22g) + CNHL 6S 4000mah 70C (691g) : 3876g
And 3699g without ordnance
Wingload : 125 g/dm2
Wing area : 31 dm2
Power : 3668-1960kv Brushless inrunner motor
ESC Hobbywing 120A with 8A BEC
12 blades EDF
9g hybrid digital servos x4
9g metal gear digital servos x2
17gr MG digital servos x3 (elevons and rudder)
LiPo 6S 5000-6000mAh (depends on their weight)
Rx 7 channels minimum (throttle, elevons x2, rudder (mix with nose steering wheel), gear, airbrake, reverse
Nylon hinges
EPO foam
❌ Book CG (gear up) : 215mm from wing root Leading edge but MAIDEN 235mm ! CNHL 6S 4000 70C (690g) all the way back and 20gr counterweight they give you in the rudder (hole where rudder servo comes from)
📏 My Triple Rates (low / mid / high) after 6th flight :
Wing Ailerons : 20mm/24mm/100%
Wing Elevator : 14mm/35mm/100%
Canard aileron (not scale…) : 13mm/15mm/100% measured leading edge
Canard elevator : 8mm/20mm/100% measured leading edge
Rudder : 20mm/27mm/100%
⏰ Flights with timers and voltage (checked few minutes after landing):
-1st filmed crosswind : CNHL 4000 70C CG235mm : 4m50 flight (4m18 motor) 3.74v
-2nd windy and fast : CNHL 4000 70C CG235mm : 3m14 flight (2m30 motor) 3.81v
-3rd filmed : CNHL 4000 70C CG235mm : 2m38 flight (2m13 motor) 3.83v
-4th WITHOUT ordnance (too nose heavy CG225mm) filmed : CNHL 4000 70C CG235mm : 3m38 flight (2m54motor) 3.77v
-5th with ordnance CG235mm, filmed : CNHL 4000 70C : 3m24 flight (2m54motor) 3.81v
-6th with ordnance CG235mm, hard aerobatics : CNHL 4000 70C : 3m45 flight (3m16motor) 3.74v
0:00 Présentation française
0:30 English presentation
1:37 Détails des futurs jets
2:03 Pour les Moteurs Outrunner
2:38 For outrunner motor
3:40 Curve your zip ties
4:19 V3 English instructions
5:05 Différentes Couleurs
5:33 Idol power on/off
6:10 Marche/arrêt LED au ralenti
6:50 Alarme voltage bas (3.5v)
7:52 Low voltage alarm (3.5v)
8:36 Installation on Freewing Typhoon 90mm
12:31 Feed wires to the front (⚠️Don’t do like I did and put the wires UNDER PLYWOOD ESC ⚠️)
14:04 Screw EDF
14:55 Y harness balance plug tip
15:52 Cable Y prise équilibrage
16:15 CAUTIONS ⚠️
16:40 Précautions ⚠️
17:08 Calibration !
17:28 Jeti (new AB function) wiring
18:38 Calibration
20:22 Change colors 🔥
22:22 Switch off idol LED
22:55 Testing
23:14 Check CG 235mm with this LED
24:02 In the dark…
24:43 www.kmrcmodel.com
25:05 Thanks 🙏🏻 please SUBSCRIBE 🥰
25:38 Details photos (Afterburner, LiPo…)
#typhoon #afterburner #rcplane #eurofighter #eurofightertyphoon #jeti #opale #radiocontrol #spanish #modellbau #new #foam #rc #aviation #release #unboxing #kmrcmodel

Спорт

Опубликовано:

 

30 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 41   
@crddrones3457
@crddrones3457 Год назад
Very helpful thank you. God bless.
@ArthurRC
@ArthurRC Год назад
Oh thanks mate 🙏🏻
@spaddriver1957
@spaddriver1957 Год назад
KM afterburners are absolutely the best on the market!. Blue flame,orange flame or a combinationof both!. Burner on from startup or calibrate with throttle as to when you want the burner to start!. Realistic flame effect. Easy install and affordable price. I have 3 already in my EDF planes and absolutely LOVE the look!. And they have informed me that they are working on versions that will work with both major brands of thrust reversing Esc's!. Can't Wait!. Both👍👍's up on these.
@ArthurRC
@ArthurRC Год назад
Yeaaaah you are right they are the best !!!! 🥳🥳🥳
@guisblacio
@guisblacio 2 месяца назад
Great info, thanks for posting it. 👍
@ArthurRC
@ArthurRC 2 месяца назад
Thank you so much 😊🙏🏻🙏🏻
@collinmccallum
@collinmccallum Год назад
stunning!
@ArthurRC
@ArthurRC Год назад
Oh thanks buddy 🙏🏻🙏🏻🙏🏻😇🤩🤩
@jared6072
@jared6072 Год назад
I have been using the v2 ones and love them. I want to get the v3 for the typhoon. Thank you for showing that the install. Good to know it will be a drop in fit without needing to cut foam away
@ArthurRC
@ArthurRC Год назад
Yep 👍🏻 thanks a lot for your kind words
@kmrcmodel155
@kmrcmodel155 Год назад
👍👍👍Looks Great on that Typhoon! Thanks for the super-detailed introduction, Arthur!
@ArthurRC
@ArthurRC Год назад
Thanks a lot buddy 🙏🏻🙏🏻🙏🏻🥰
@nirlachman007
@nirlachman007 Год назад
Looks much better with this afterburner :) I like that blue tone 👌🏻👌🏻
@ArthurRC
@ArthurRC Год назад
Yes that purple is scale in fact ! Just look picture of F-16 or mirage 2000 afterburner 🔥🤩🤩🤩
@moniquejanin-hm5ow
@moniquejanin-hm5ow Год назад
👍🏻
@ArthurRC
@ArthurRC Год назад
🤩🙏🏻
@patou3375
@patou3375 Год назад
hello, sympa comme produit ! Vu que ca simule le moment ou le pilote met plein pot et le boost, j'aurais plutot mis ca a 80/90% de la courbe de gaz. 😊
@ArthurRC
@ArthurRC Год назад
Oui mais dans ce cas on la verrait rarement allumée 😂
@fabiuzzi1234
@fabiuzzi1234 Год назад
Pas mal pour le prix ! Il faut juste penser à attacher les fils !😁😜
@ArthurRC
@ArthurRC Год назад
Haha exactement 😂😂😂
@zakksrage
@zakksrage Год назад
Afterflashlights
@ArthurRC
@ArthurRC Год назад
Hehe 😅😇
@lafranja6969
@lafranja6969 Год назад
Hi, great videos! Did u conect the afterburner with "Y" to rhrottle, or use an extra channel? Do instructions says do not use with reversing ...
@ArthurRC
@ArthurRC Год назад
Thanks a lot ! I use a spare channel like that I can set the AB without having to grab the jet every time I apply throttle 😁 And there aren’t any problem with reversing
@tosspz1202
@tosspz1202 Год назад
Je regrette presque n'aimer que les avions à hélices !
@ArthurRC
@ArthurRC Год назад
Hahahah il faut sauter le pas 👌🏻🔥🔥🔥
@tosspz1202
@tosspz1202 Год назад
@@ArthurRC, nous n'avons pas de piste en dur. Et puis j'aime les hélices !
@ArthurRC
@ArthurRC Год назад
Ha il y a des jets qui passent bien sûr herbe 😇😇😇
@fredericpousset7567
@fredericpousset7567 3 месяца назад
Bonjour Arthur’ je viens de monter un système Afterburner sur mon viper mais impossible de le programmer. J’ai pourtant bien suivi ta vidéo et leur instruction. Voilà ce sur j’ai: des que je branche le câble « équilibrage » la lumière rouge ne clignote pas et reste rouge. La programmation (initiale j’imagine ) c’est toujours allumé, orange à l’arrêt et avec un peu de gaz et bleu quand je mets à fond. Impossible même en poussant plusieurs fois sur le boiton de changer quoi que ce soit. Peux-tu m’aider? Merci d’avance
@ArthurRC
@ArthurRC 3 месяца назад
Oula c’est très confus tout ça je comprends pas tout 😂 c’est une PC de chez KM RC Model?
@michele1751979
@michele1751979 9 месяцев назад
Bonjour, peut-il être installé sur eurofigter 8s ? Merci
@ArthurRC
@ArthurRC 8 месяцев назад
Ouiiiii c’est universel 🎉
@fredericpousset7567
@fredericpousset7567 3 месяца назад
Bonjour, savez-vous quel modèle prendre pour un Viper 70 mm Anniversary ? Merci pour votre réponse.
@ArthurRC
@ArthurRC 3 месяца назад
Bonjour ! L’avantage de ces afterburner est qu’ils sont universels donc ça ira sur un 70mm 👍🏻
@fredericpousset7567
@fredericpousset7567 3 месяца назад
@@ArthurRC Encore une question: actuellement sur leur site ils ont un modèle en promo V1 (uniquement lumière orange mais ça me va) pour lequel ils indiquent pour moteur 70-80-90 mm et un autre modèle (le vôtre je pense) mais pour lequel ils indiquent pour 80-90 mm ? Pensez-vous que ce dernier ira sans problème pour mon Viper 70 mm? J’aimerais votre avis.Merci
@ArthurRC
@ArthurRC 3 месяца назад
@@fredericpousset7567 il faut prendre la v1 pour 70mm…
@lukaszJB
@lukaszJB Месяц назад
I do everything as in the instructions and I can't calibrate it so that it lights up at 50% throttle :/
@ArthurRC
@ArthurRC Месяц назад
Oh that’s strange 😢 🙈 I don’t understand why you didn’t manage to set the light…
Далее
Flite Test - EDF Afterburner
10:07
Просмотров 1,9 млн
Building a DIY REAPER Drone... Ended Badly
9:19
Просмотров 2,1 млн
Хабиб НЕЖДАНУЛ ФАНАТА #мма
0:32