And where back at part 2 00::00:49 still on version old ass 4.3.1 on Betaflight. 00:02:53 Did you get to try the HDZero 90 fps? 00:07:24 Are there pads on the opposite sides off the Walksnail PCB? 00:08:40 Rub the liquid tape off with a toothpick. 00:12:36 What are some build tips and tricks you wish you could know earlier ? 00:18:32 What is a good price for a GoPro Session 5? 00:21:12 Solvent for electric tape. 00:23:22 What do I need to get rid of propwash? 00:27:38 Hopefully I will be able to invest more in fpv soon. I’m selling a lot of my pc gaming stuff on marketplace. my old monitor, my keyboard, etc. I can make a few hundred off of it hopefully. 00:29:10 What do you recommend on a 3.5" build for semi-cinematic/light freestyle? motors, aio, etc.. 00:34:14 I’m proud to say that after saving up for 8 months to get a drone and then sending it into a tree never to be seen again, I didn’t let it discourage me. I love this hobby more than anything. 00:34:56 Flying line of sight. 00:36:34 What do you think the 0-60 is for a 5 inch? How about a 65mm tiny whoop? 00:38:12 What freestyle trick you want to master? 00:45:21 Have you flown the Bubito? if so, what do you think about that thing? 00:53:36 What’s the difference between props slightly larger and slightly smaller? like how would GemFan 4934s fly compared to 5in props and 51466s? 00:56:03 What is the difference between dual ball bearing and bushings for TinyWhoop 0702? More durable, more efficient, longevity? 00:57:52 I think it may act as a solvent of itself... Might be worth a try. 00:58:00 What do you think of JHEMCU stuff or the Brother Hobby 1404s? Vs the T-Motors? Thinking about basically copying the Avionrc Ikon 2.5. 00:59:38 Is the Bubito very different from the baby nanos? 01:01:01 Baby turtle is a great little micro. 01:08:37 Checking the new Aikon ESC. Not working on Blheli32 01:09:58 The only reason I even consider the Brother Hobby is that they seem to make more power, 01:19:46 I have 2s 75mm (37g dry) with 300mah battery (53g); 550mah will take the weight up to it 64g will I be able to freestyle without much sag and get longer flight times? 01:23:14 Bubito is a T-motor F411 1S 25x25 AIO Flight Controller with 6A Bluejay ESC, 50mW VTX and ELRS 01:23:43 Been trying all day to get a mobula6 ECO up and running. Newish to hobby. Current problem is 0 throttle on my transmitter shows as 1200 throttle. This causing drone to take off on arm. 01:25:50 Do you have a 25x25 AIO (not vtx) you recommend then for 2.5in? Ever a Speedy Bee stack? 01:27:14 I was going to say this earlier but hedged... I don't understand why you're so upset about missing that broken wire. That was a tough issue to troubleshoot imo... Like, that NEVER happens! 01:31:13 Why the need to update? does it not work? 01:32?18 I was talking about the fpv cycle motors, are the brother hobby ones the ones he sold if they were shitty to him that's surprising since they have been good for me 01:35:58 Male Bag. 01:42:25 Let’s fly. 01:56:22 I was watching your stream on the ultralight video antenna. and now in curious if you could try on a stream to place , instead of the sleeve you remove to save weight, an annealed wire 02:02:10 some damage on the Whoop. 02:04:43 I just soldered bt2.0 onto a mobula6 new to me. Motors tab runs motors, modes move when I arm, but motors don't spin. 02:05:14 In the volvo world, rod through the block is called a visit from the kool-aid man. lol Stay safe everyone and have fun flying
I don't regret learning to fly on dji, now though not having the money to switch over to hd0 has me second guessing myself. Latency is becoming more and more important.
@@chrisB_OG i know I know, it's killing me more that my drone budget doesn't include a set of goggles and a cpl vtx. I think my biggest problem being dji doesn't have a 1s system that doesn't weigh anything for whoop racing lol
@@JustKeepLivingFPV yeah that's a good point for whoops... I also want HDZero. I'm currently on budget analog with EV800D... they're so front heavy but decent reception and DVR.
1:34:30 if I'm not mistaken SPI based ELRS receivers do not have the option to connect through WiFi which is why the network doesn't appear. Also cannot be flashed with ELRS configurator. The ELRS code is optionally contained within Betaflight, and needs to be updated along with Betaflight (as well as setting the binding phrase). I had to learn this while trying to set up a Tinyhawk 3 Freestyle.
@ 00:44:24 I would maybe try picking off a decent sized piece of that liquid electric 'tape' you are trying to remove and experiment with different solvents, I'd start with something pretty mild like acetone (nail polish remover), there are some other stronger ones like naphtha (paint remover), but you'd also want to test said solvent on a junk pcb.
