No video :(

Air Venturi Avenger .25 Rebuild - It’s great when companies make it easy to maintain their products!

Expert Airgun Reviews / AirgunWeb / AirgunWebTV

Подписаться 100 тыс.

Просмотров 9 тыс.

50% 1

Today’s video on the “Air Venturi Avenger .25 Rebuild - It’s great when companies make it easy to maintain their products!” is brought to you by AirgunWeb. Please visit www.airgunweb.com to learn more about all our sponsors.
Airguns are technically complicated products that require maintenance. So, what do you do when your airgun starts to leak or the regulator wears out? Most of the time, you’ll need to send it to the manufacturer or a specialty repair company. But that’s not the case with the Air Venturi Avenger (and the Avenge-X) line of airguns because they sell complete rebuild kits for their products! In this video, we’ll do a basic teardown and repair of the plenum and main air cylinder. If you have an Avenger and it needs repair, then this video should help get you started!
Products used in this video:
Avenger .25 Synthetic: www.pyramydair...
Avenger .25 Seal Kit: www.pyramydair...
#airventuriavenger #avenger #avengerpcp #customairgun #customgun #airventuri #pyramydair #airgunhunting #pelletguns #airguns #targetshooting #shootingsports @pyramydair @AirVenturi
Man, it’s a great time to be an airgunner!
Exclusive Behind the Scenes and Early Access, Ad-Free content NOW ON PATREON! - / airgunvideos and AirgunArmy www.AirgunArmy...
www.airgunweb.com - meet our sponsors
/ airgunweb - watch our content
www.gatewaytoa... - connect with airgunners worldwide!
AirgunWeb & AirgunWebTV Content Disclaimer: www.airgunwebt...
************************************
AGW / AGWTV Content Disclaimer
************************************
By viewing or flagging this video you are acknowledging and are in full acceptance of the following:
Our videos are strictly for documentary, educational, and entertainment purposes only. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. Treat Airguns as FIREARMS and observe all the same safety considerations as such. Any and all work on airguns should be carried out by a qualified and insured individual. We (including RU-vid) will not be held liable for any injury to yourself or damage to your airguns resulting from attempting anything shown in any of our videos. These videos are free to watch and if anyone attempts to charge for this video notify us immediately.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@AirGunWeb 8 месяцев назад

Thank you for watching! Please be sure to read the full description and the video disclaimer before making any comments. When posting comments or asking questions, please do not try and promote your channel or videos here and please do not post items for sale as that may violate RU-vid's terms of service. Please be kind and courteous to each other and give others the space to have a different opinion. That's what makes this a great nation, and hopefully this a great sport. Thank you again for watching!

@smokingunclefrank6037 6 месяцев назад

Thanks so much I have the Bullpup version which I'm sure is very similar I do have one question is it common after say 5 to 6 months to loose air in a PCI if not I might need to replace some O-rings and do they have to be from the kit or can other brands be used as long as there the same diameter

@Nazareth434 Месяц назад

@@smokingunclefrank6037 no it isn't mine has the same issue- haven't even run many shots through it either- I'm gonna have to replace the orings- not sure where mine is leaking though

@garyjernigan2697 9 месяцев назад

Yes, Please do a further breakdown on the Avenger. I think a video on how to work on our guns would be super helpful to so many Avenger owners. I'm sure there are other Avenger owners like myself who are leary about 'breaking' into their rifles. I have already learned something very valuble watching this video. Thank you for your dedication to the air gun world.

@hollowell427 9 месяцев назад

Air Velocity Sport youtube channel has a complete teardown video.

@brianwest5348 8 месяцев назад

A full break down would be awesome! Thanks Rick for these tutorials. Cheers

@fjqtaxch9 9 месяцев назад

Great tutorial to show Avenger owners how to do their own repairs and mantenance.

@joelmiller2532 9 месяцев назад

Thanks Rick! Yes please, a full teardown video would be great! I love my Avenger and hope to have it for a good long time! 👍👍👍

@le3045acp 9 месяцев назад

you should definantly rub silicone grease into the orings before assembly

@WillievanGraan84 3 месяца назад

Wanted to say the same. Absolutely

@NHGUIDE88 5 месяцев назад

RICK!!!!!!!! I have been chasing a verrry slow leak in my .25 avenger for a while. I never thought to change the o-rings in the tube as they did not bubble with the soapy water treatment. All the impetus I needed was THIS 'the .25 avenger rebuild' video! o-rings were smooched WAY out of shape and stiff as a board! all fixed now and holding air like a champ! delighted, is a word I would use! thank you for videos like this and please consider making more fix-it videos for various airguns.

@jp8351 9 месяцев назад

I really like these tear down/repair videos. It's always informative even if I don't own that perticular airgun. You can alway learn something you might bump into yourself. I was wondering because i read about issues with water in the tubes/bottles with the little compressors, do you need to inspect the inside of the tube when disasembled? what to look for? Could you maybe do a video on that topic?

@FranciscoRuiz-wy1el 9 месяцев назад

Agree with this comment that would be a great topic to do a video on

@romeoalphafoxtrot9517 4 месяца назад

Great video! The Avenger is such a great platform! Love that gun! I have one in .22 that has shot absolute lights out from day one! I modified the Hell out of it with a Terminidator Chassis and a 360cc bottle conversion. It shoots JTS 18.1 pellets at 900 fps in one ragged hole at 50 yards. I'm getting about 60 shots on a fill, no problem.

@kolohe0782 5 месяцев назад

Thanks Rick...Great video I have the kit, just need to dive into it

@robbierobinson8819 8 месяцев назад

Having only fairly recently gotten my first PCP, it has been very useful seeing you working on an airgun. Such clear videos from you Rick. More rebuilds, please - I learn something new with each about PCP airguns in general even when I will never own the particular gun.

@AirGunWeb 8 месяцев назад

Thank you for the kind words. We have a lot of these videos under consideration. I’ll see what we can do to get them in the pipeline. Cheers AGW

@nightwolf357. 9 месяцев назад

Yes PLEASE!!!!! Have a .177 & .22, that I'm sure I'll need to do work in the future. Also, Saber Tactical Makes a scope rail for that, that was the first thing I replaced on mine...And if you fill really rambunctious, a tear down on the Senaca Aspine would be nice for Christmas???? Seem to be having pump problems when the pressure gets under 2000 psi... Thanks and keep up the good work... Big C 😎

@stevengoodman3498 5 месяцев назад

I did the Saber Tactical scope rail upgrade as well when I first got mine. Then I took off the front section of synthetic stock and installed Terry's BuckRail foregrip and the 11cc Doux Tech plenum. Then front barrel band to lock it down up front. Shoots like a laser! Mines a 25 caliber by the way. Superb rifle when it's not leaking.😊

@le3045acp 9 месяцев назад

Rick i know i sound like a broke record but you didnt tighten the barrel band

@VooNCZT 9 месяцев назад

The small cylinder is not the plenum, it s just another tube for air storage. The plenum on the Avenger is very small, about 15cc, and it's on the block valve assembly, near the regulator. Cheers!

@jeremiahzak8891 9 месяцев назад

Took the words from my mouth. Also it's a good idea to add a little bit of silicone oil to those rings just for future reference.

@AirGunWeb 9 месяцев назад

Thanks for the input. I look forward to getting one all the way apart and hopefully that will help with proper identification of all the parts. Cheers Rick

@Kevin-pw2js 6 месяцев назад

You can get a parts explosion from the factory..@@AirGunWeb

@stevengoodman3498 9 месяцев назад

Nice one Rick, just went thru mine. Stay well brother!😊

@le3045acp 9 месяцев назад

good job but while you had it apart i would have replaced all the orings in the parts you partially disassembled but i understand you are just doing whats necessary and giving the viewers the oportunity to see you dont have to be a rocket scientist and most people can do it if they have common sense

@s.y4496 9 месяцев назад

Thank you for this video. Is a very helpful for Avenger owner. We pcp need such Videos. 👍👍👍👍👌🏻👌🏻

@heathhalfhill6401 9 месяцев назад

If it’s time for you to rebuild an original Avenger then I will bet it would be a good idea for me to rebuild my NV Libery😉 Please more videos on repairing and rebuilding. Stay blessed.

@timmy4539 9 месяцев назад

Nice video Rick great info ! 👍

@davidyummus6259 6 месяцев назад

I just set my Reg to 2000psi & hammer to 3 full turns in to get 900fps & 33 foot pounds of Energy with J&N 18.13 grain Domed :)

@hollowell427 9 месяцев назад

got mine out yesterday and it was dry of air. Put a couple of drops of silicone oil in my fill hose adapter and hit it with 3600 psi.and shot it about 50 times. been watching it and it dosent look to be losing air so far. If it does i got a captain oring kit for it.

@Sirfixalot1969 6 месяцев назад

Thank you for showing some of the workings of the unit it helps to see what to look for, but I was thinking that silicone grease (Molykote 111) should be used on the new orings, shouldn't it?

@obtuso 2 месяца назад

Amazing vídeo sr, it helped me a lot. My english is not very good like it was on the 70’s but i got it. Woluld you say that is a good thing to use silicon oil in all those Orings like in 11:00 ?

@roberthathaway7958 9 месяцев назад

Should we use silicone or oil ?

@stevengoodman3498 9 месяцев назад

Silicone divers lube or pure silicone oil.

@Kevin-pw2js 6 месяцев назад

I use a wooden shish kebab skewer as an o-ring tool as not to scratch seats

@thomasstocks702 9 месяцев назад

Hey Rick, do you prefer the Vevor compressor over the GS CX4? I seems to me that the CX4 operates at a slower rpm.

@AirGunWeb 9 месяцев назад

Hey there.. two completely different products in my opinion. If you are just filling guns, then you don't need the CS4. If you want to fill pony bottles AND guns, then the CS4 is great. The Vevor (and other portable compressors like the ReadyAir, RovAir, JTS, etc.,) to fill guns have all done well for me. Cheers AGW

@roberthathaway7958 9 месяцев назад

Realy y a new gun rebuild more oil want should I do I’m not a macanic should I use mor oil what should I do

@roberthathaway7958 9 месяцев назад

What u use oil or vasilene

@garygranier6369 7 месяцев назад

I have a Umarex 22 cal. First gen, and I want to upgrade, what would you recommend the new Umarex Gauntlet, Umarex Origine, or rge Air Venturi Avenger.

@kobusvanrensburg4092 Месяц назад

Has anyone ever managed to remove the plastic cover on the receiver?

@Kevin-pw2js 6 месяцев назад

Take pictures of every step

@smokingunclefrank6037 Месяц назад

Have a question I can't seem to be able to get the part that screws into the plenum on my air venturi avenger bullpup do they lock tight those parts at the factory can I use heat to loosen them or is there a better way I want to check all the O-Rings and can't get to them any advice would be appreciated I assume it would be left loose right tighten

@AirGunWeb Месяц назад

Hey there. Some of those parts are really tight. Not sure how to help on that one. Reach out to Air Venturi and see if they can provide assistance. Cheers! AGW

@smokingunclefrank6037 Месяц назад

@@AirGunWeb I already did thanks

@mikejoseph8392 5 месяцев назад

You call this video a “Rebuild” and change an o ring. What’s the point?

@perniciousprogressive8333 4 месяца назад

Any thoughts in a supposed issue w/ Avenger X rifles having a design flaw with their springs? Supposedly the tube version in .25 cal. in particular was having issues w/ broken springs. The cause was posited as being that the maker had tried to get away w/ using the same spring for all three calibers, but it fails due to a back pressure influence on that spring. Using the bottle vs. the tube is said to help mitigate the problem thanks to higher volume. I don't understand ot all, but was just getting ready to order one when I stumbled across the concern. Specifically the person making the comments is an air gunner and mechanical engineer who works in industrial air & hydraulic systems by day. His observations also centered on the new (silver) vs. original (black) springs, saying the 7ssue 8s beingvignored and buried. He's also a competitive shooter btw.