If you are installing aftermarket seats or just seats from another generation or year of Mustang you may want to get that annoying airbag light off your dash. Well after weeding through all sorts of info I decided to make a video that not only tells you but shows you how to get that airbag light off your dash.
Required items:
Seat belt receptacles (current assumption if you could loop the wires to complete the circuit).
Seat position sensors (place the sensor near metal or other have said you can short it to make it work)
Airbag resistor:
Airbag adapter:
NRG Innovations SRK-RES Pair SRS Warning Light Resistors Hub Adapter a.co/d/7KWmgNd
Resistors:
uxcell a14060600ux0450 30 Piece Axial Lead 1W 1% Tolerance 2.2 Ohm Flameproof Metal Film Resistor a.co/d/be4zUYZ
Passenger occupancy sensor:
Remove sensor and bag filled with liquid from stock seat and connect to harness and place under the seat. You must zip tie or squeeze the fluid to make the airbag deploy in an accident. If it does not have pressure it will not let the airbag deploy. (Different years have different sensors 15-17 and 18-22 are different)
26 авг 2024