I agree with you but it is convenient for older people that cannot very easily control the alarm through the app or with the keypad. If you don't need the included keyfob it's not necessary to add it in your system.
Φίλε πραγματικά τι τα θέλεις τα αγγλικά? Εδώ πέρα έχουμε χάσει την μπάλα με το αυτό το ρημαδοσυναγερμό. Προσπαθώ να κάνω Add Hub και μετά βγάζει error Com_wrong_message_type_0 . Εχω κανονικα συνδεδεμένο το συναγερμό στο router, τον έχω στην πρίζα και είναι πράσινος, κάνω και το Scar QR Code, βάζω και ένα όνομα 6 χαρακτήρες, τίποτα. Ξανά και ξανά το ίδιο error. Και για το Location τιποτα δεν ανέφερες. Ψάχνω στον χάρτη να προσθέσω την διεύθυνσή μου και πετάει error Και εκεί! Ε για πεταμ ειναι.
I love the system. I was an installer for 9 years and only used Visonic. I changed to Ajax. It's a beautiful system with many great features. The App is superb and firmware updates automatic. There is one thing I would change. And that is the remote. It is too slippery and every time I locked or unlocked my front door I would accidentally press a button. I longer use them, they are that bad. The app is much easier to use to set and unset the alarm. If Ajax sorted out the remote it would be perfect.
Σε ευχαριστούμε πολύ! Προς το παρών δεν υπάρχει η δυνατότητα να συνδεθεί απλή σειρήνα. Θα μπορούσε να συνδεθεί στο Ajax Relay όταν βγάλουν τη δυνατότητα να ενεργοποιείται σε περίπτωση συναγερμού!
I have a question. If door is open which has door contact (entry route) alarm also set . Is there any option if door is open which has door contact ,alarm should not set ( because door is open )
Have you tested Ajax DualCurtain Outdoor or Ajax MotionCam Outdoor? If yes , do you recommend them for exterior use? I need 2 exterior detectors (probably dualcurtain) and i cant choose between Ajax DualCurtain Outdoor or Optex BXS-RAM with Transmitter Module For Third-Party Detector Integration. I need something good and reliable but didnt find any reviews for Ajax Outdoor detectors. Thanks for your time George
Πολύ καλό βίντεο. Η ρύθμιση/arm/disarm φαντάζομαι γίνεται μόνο όταν το κινητό βρίσκεται στο ίδιο δίκτυο. Απομακρυσμένα μπορούμε να "δούμε" το συναγερμό?
I love the system. I was an installer for 9 years and only used Visonic. I changed to Ajax. It's a beautiful system with many great features. The App is superb and firmware updates automatic. There is one thing I would change. And that is the remote. It is too slippery and every time I locked or unlocked my front door I would accidentally press a button. I no longer use them, they are that bad. The app is much easier to use to set and unset the alarm. If Ajax sorted out the remote it would be perfect.
Hey again, I'm looking a way to remain the led indicator always on in StreetSiren, not only if the system is armed! I have connected also to external 12v power supply but I'm not find an option. Any idea?
Hi! We don't have a solution for this. If the customer wants permanent LED blinking then maybe you can add in Ajax a Wired outdoor siren using Ajax relay. For more info please watch this tutorial : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bL2693lyWxI.html
Καλό φαίνεται αλλά εχω ενστάσεις. Ξεκίνησα να ψάχνω συναγερμό εδω και μερικές ημέρες και ο πρώτος που είδα ήταν το SimpliSafe που δυστυχώς Ελλάδα δεν εχει κάλυψη για ενημερώσεις μεσω sms οπότε δε λειτουργεί στην Ελλάδα. Σε σχέση με εκείνο λοιπον... ΠΟΛΥ άσχημο και χοντροκομένο Design. τόσο στους αισθητήρες για παράθυρα πόρτες όσο και στη σειρήνα. Μη μιλήσω για το πληκτρολόγιο που πραγματικά δε βλέπεται. Θα ήθελα να αγοράσω ένα τετοιο σύστημα αλλα δεν ξέρω.. δεν εχω βρει Ελλάδα κάτι να βλέπεται. Το ajax αν και δε βλεπεται φαίνεται να είναι το πιο σύγχρονο. Αλλα αυτο το κ***πληκτρολόγιο..
Πράγματι το SimpliSafe φαίνεται πολύ ωραίο. Μακάρι να πέσει στα χέρια μου ώστε να το δοκιμάσω. Βέβαια θεωρώ και πως ο Ajax από design πάει πολύ καλά. Προσωπικά τουλάχιστον μου αρέσει και αρέσει πολύ και στους πελάτες μου. Εκτός από αυτό όμως πρόκειται για ένα πολύ αξιόπιστο σύστημα και το τέλειο είναι ότι προσθέτουν συνεχώς καινούρια πράγματα.
Excellent instructional video (background music gets annoying after a few minutes though - recommend soft music), otherwise a very professional presentation.
καλησπερα και καλες γιορτες. Χτες μου διερρηξαν το σπιτι. Μπορεις να μου πεις σε παρακαλω πολυ αν το συστημα το τοποθετησω μονος μου , το δεχονται τα γραφεια παρακολουθησης σηματων. Σ ΕΥΧΑΡΙΣΤΩ
Καταρχήν συγχαρητήρια για την παρουσίασή!!! Επειδή είχα ήδη ενσύρματες επαφές χρησιμοποίησα το multi transmitter αλλά αν οπλίσω το σύστημα και έχω αφήσει ή ξεχάσω ένα ανοιχτό παράθυρο «δεν με ειδοποιεί»... αλλά και έστω χωρίς ειδοποίηση δεν μπορώ να βρω πιο άφησα ανοιχτό. αυτό μπορεί να διορθωθεί;; νομίζω ότι πιο παλιότερα στην εφαρμογή φαινόταν τι ήταν ανοιχτο.
Thank you for your comment! According to Ajax : support.ajax.systems/en/faqs/sim-for-hub/ "To make SIM card work properly, please do the following steps: -SIM card shall have some money on its account or free Megabytes for using the Internet -SIM card shall support 2G Internet -The pin-code request shall be removed"
It's the first time that i have complains about music. I thought that it will be nice to be music underneath in low volume and not just my voice but your comment made me skeptic. Do you suggest to remove the music completely or maybe lower more the volume?
Το σύστημα εννοείται ότι λειτουργεί και χωρίς το πληκτρολόγιο και χωρίς το spacecontrol. Κάνεις τα πάντα μέσα από το κινητό σου. Το relay το χρησιμοποιείς π.χ. για να μπορείς να ανάψεις ένα φως. Π.χ. θα μπορούσε όταν χτυπάει ο συναγερμός να ανάβουν τα εξωτερικά φώτα του σπιτιού.
Μπράβο ρε παιδιά τέλειο ..... μόλις εχθές πήρα και εγώ όλο το πακέτο και ήταν πραγματική βοήθεια το βίντεο σας !!!! Αν και έχει ένα σωρό ρυθμίσεις για να κάνεις .......χεχεχε !!@@!!!
Very nice review. So... For the cheapest solution for my parking lot that it is 2 floors down of the apartment building and about 30 meters distance, all i need is the hub and the magnets for the parking doors?
@@kouvanos i have tested that and it works! I have made also an installation in a 3 floor house where i installed the hub in the second floor and everything is working fine without repeaters, but in another similar installation i had to install the hub in the second floor and 1 repeater in each floor. So it depends...
εξηγησε μου λιγο αδερφε μου τη διαφορα ajax pro με την απλη εφαρμογη ajax μπορω εγω που ειμαι ο χρηστης κ εχω την απλη εφαρμογη ajax να εχω προσβαση στις ρυθμισεις hub?
Η εφαρμογή Ajax Pro είναι για τους εγκαταστάτες. Αν είσαι χρήστης και πάλι μπορείς να έχεις πρόσβαση στις ρυθμίσεις του Hub αρκεί να ζητήσεις από τον εγκαταστάτη να σου ορίσει τα απαραίτητα δικαιώματα.
Yes you can arm and disarm the alarm using the app. You can see how in the 30:15 of this video. For now you cannot arm/disarm using a timer. Maybe they will add it in a future update.
Thank you for your comment! The Pro app is for the installers. The difference is that with the Pro app the installer needs permission from the owner (that has the Ajax App) in order to be able to make changes in the system. So for example i am the installer with the Pro App and i want to access your system. A notification comes to you, that i need access to your system and you have the option to allow me for a couple of minutes, for a couple of hours, permanent access or deny access. If there wasn't the Pro app then you as owner you wouldn't have above options and i could access your system settings without asking for permission. That is why all pro installers must use the Pro App.
I really like the functionalities and easy installation of this alarm system. Can it be used with any smart home ecosystem. For example can i use my alexa to arm/disarm the alarm? Thank you.
Thank you for your comment. Ajax Security System is really a great product. At the moment Ajax can interact very easily with third-party cameras but i believe in the feature updates more devices will be added. As for Alexa i believe it is not safe. I cannot imagine a stranger to come to my house and just say "Alexa disarm the alarm"!!!
@@PoseidwnTech Thank you, although that sounds like it can't have settings for full or part-arm like you can on more traditional alarm systems. I prefer beeping for full set and silent when night setting so as to not disturb people.
HI! There are 2 modes Full Arm and Stay but Ajax supports partitions, so it is possible to create for example 2 partitions : 1) Home and 2) Garage. For these two partitions you will still have 2 modes Full Arm and Stay. In order to create a new partition in Ajax App go to Hub Settings and select Group Setup and then create a Group!
Been using them from the release date its a very reliable system , yet it will need more features and settings to go toe to toe with a professional alarm system.
@@PoseidwnTech yep seen it later that day, as an installer we have insight earlier than thw official release. Actually is a bus Alarm Panel. Its closed system like Apple .
The problem is if someone goes in the morning, for example, I only hear my phone vibrating only when the message comes to me, that is, I don't hear the device ringing, is the problem in my phone or in configuration ajax
I believe that you have to check the configuration of your mobile. For iPhone for example you have to check the notifications settings (Settings -> Notifications) and be sure that for Ajax App Sounds are enabled.
@@PoseidwnTech Is a new ring added in the phone like Siren ring or does it come automatically. As for configuration, where do I enter to find app sounds are enabled. I have a Samsung phone
Thank you for your comment. I am using also Paradox products. MG5050 combines wired and wireless sensors but Ajax is ideal if you need only Wireless. The only thing that is missing from Ajax is the ability to make scenarios when Alarm is triggered. For example using the Ajax Relay to be able a trigger a wired Siren or turn on the lights etc. Now you can use the relay only when arming and disarming.
@@PoseidwnTech that is true. And also Paradox has stay/sleep function. i believe AJAX doesn't? But you can arm room by room if I undestand correct? So assign outside beams to Room : Outside and just arm that "Room"?