AKAI CS-34D PART 3 BELTS REPLACEMENT 

Thank you for taking interest in watching the whole series of those videos.

Thanks . If remember correctly, the speed adjustment screw on the motor is hard to get to as well. I show that in the video towards the end , however if you got to that stage , and the motor is not responding to the speed adjustment screw, I don't know what the problem could be. Are you sure the screwdriver you're using , is actually engaging with the screw . It's a small flathead screw. Again if I remember correctly, you have to take of the panel , on top around the VU metres, to get to speed adjusting screw , It's all in the video , towards the end. Good luck

@@vidtech2630 yeah i did all the steps. i took of all the panels, but my motor doesnt have a hole for the screwdriver.

@@eliase95 , isn't it at the front of the motor? . I'm sure it would be same location as on this deck.

@@vidtech2630 i also pulled of the sticker from the motor, but there is no hole.

@@eliase95 maybe it's on a extra board , separate, that is not on the deck, in the video .. it has to be somewhere.

As you might have noticed in the video , auto stop gadget is independent of the tape counter , in this deck , first thing I would look at, is , if the auto stop mechanism is installed correctly, including the spring and belt condition , it's all in the video. Good luck !

@@vidtech2630 thanks for explaining man, appreciate it. I think i need to replace the belt for the tape counter.

Right . So you didn't understand a single word I've said..

@JejaksiBoekir26 In the description, I have put a time ( 5:28 )stamp regarding the Auto Stop Mechanism and its belts.

Ok man. So in my deck sometime it worked, but mostly didnt. Also my tape counter have same issue, thats why i was guessinh the belts need to be replaced. But from your video, probably the sliding mechanism needs some lubricamt. I dont know man, still dont have courage to open up my deck like you did. But thanks anw for answering. Will try to find a repairman and hope he will be as good as you.

Hello, I didn't keep any records, of the belt sizes, I'm afraid. When I show the belts in their bags , you might be able to see the belt sizes if you pause and zoom in. Sorry.

Its all is in the video , I didn't take any notes , when you find the section you are looking for, perhaps you can put a time note for other viewers, thanks

Try on line somewhere. I prefere to buy from a real store , but I've lost my supplier.

It's all in the video.

@@vidtech2630 time stamp?