Align Trex 600E Pro 

Yes it scared the life out of me Lol

Yes your right! It was a mistake : (

yeah, your servo's are suffering, they're trying to get to the 90 degree default at the start of the system.

Thank you Brad.

Big and scary Mark 😀👍

@@IansRCExploits If it was scary for you, I'd be terrified!

It's a massive Heli, runs on 12s!! Those Blades are massive and spin a a silly speed, they would easily Chop an arm off 🦴🦵

@@IansRCExploits 12S!!!!! 😯

Yep 12s runs on 2 6s 4000 mah lipo's!! It really is the BEAST 😀👍

Sounds good👍🚁🚁I've recently built the Trex 470lp here's a link, I haven't been able to maiden mine yet😒 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kz0v_Bn3VTs.html

Yes I've been meaning to do a DFC head conversion to it!! But it's a bit expensive to run!! 12s 2× 6s 4000mah lipo's it runs on!! To be honest every time I flew the thing it terrified me Lol

@@IansRCExploits Just noticed how old the video is! I am only an occasional heli flyer at the moment but this will change when they build around my field and I lose my 'overfly' space for the fixed wings but when that happens it will probably be helis and very small quads i come to rely on. My first experience of helis was a Copter X t rex 450 clone that i built myself. Apart from the odd hover with the training gear it was a disaster and had to be repaired virtually every flight out. I used to buy third party parts that were even cheaper than Copter X parts, tail booms and main gear spindles were particularly vulnerable. 10 years later i bought a blade 120s and then a 230s V2 and suddenly i was able to experience some success due mostly to the stabilisation of course. My mate warned me that heli flying is all about confidence and i still think he was right.

Yes confidence and loads of money Lol

Yes and it terrified me every time I flew it!! But it was a lovely kit to put together, down side is that it runs on 12s to much power for me Lol thanks for watching and commenting Robert😄👍

Yes thanks, that's the one and only time I ever did that!! Luckily I didn't damage any servos 😀👍

Hi Jose, I'm not sure if you would be able to get a 600e Pro now, the only place would be somewhere like ebay or a Heli shop that sell second hand Helicopters!! Hello Tenerife 😀👍

Well good luck!! You going for flybar or flybarless?

@@IansRCExploits flybarless

Do you know that it runs on 12s it's a very expensive bit of kit!!

Hello, if the Heli is a Trex 600e, which is the one I called the Beast!! You should easily be able to get parts for it, are you in the UK? If you are the 2 companies I use are www.align-trex.co.uk www.midlandhelicopters.co.uk

I will look your channel up as I would like to see them 😀👍

Hi Ian, thanks for the subscribe, I have a 800e dfc also but that needs parts, I have 2x500, one with a 5 blade head, a 470l that needs parts, plus a 200 that needs parts. Also a large amount of bits, such as couple of receivers, loads of lipos, some 2.4ghz jr propo receivers.

Btw midland helicopters are by my folks house

Ooh sounds like you got your hands full, that 800 will be a monster!! I found the 600 terrifying enough Lol be careful these things can bite 😒

Yes I still have the Beast!! I was going to make it DFC but just haven't got round to it 😒

@@IansRCExploits Well said, Beast😃, i saw one flying, it scared me. But, the sound it makes😍 and how it's hanging in the air, just amazing. I was scared from the 330s in the beginning also, but know it's pretty much my daily haha. You will get there Ian. I just know. Don't ever sell it😃

No I won't sell it Lol

@@IansRCExploits 😆👍

Hi Chuck, I'm sure it would be possible to convert the Nitro Trex 600 to electric!! But I'm my experience it would cost a fortune to buy all the seperate parts that you would need for the conversion, it would probably be a lot less expensive to try to buy a second hand Trex 600e 😀👍

yes a "Gasser" helicopter runs on petrol, with a additive mixed in that is available from hobby stores and online. Lovely Heli BTW!

Do you mean Angular mode like you get on the Microbeast Pro? If you do then no the Trex 600E has a fly barred head so only needs a tail Gyro as the flybar makes the Heli stable!! If it was flybarless then it would need a Gyro for the head and tail 😄👍

@@IansRCExploits So it's like an extra ballast.

In a way!! The flybar has paddles on it which act like a mechanical Gyro which helps to keep the Heli stable!! When you use a flybarless head the Gyro does the job for you😄👍

@@IansRCExploits you mean like heli ch 4

I'm not sure what you mean!! My friend

With the Trex's speed controller the throttle has to be set at mid position it wont arm until the throttle is brought down to the lowest position then the castle speed controller finishes set up,so it seems that I know exactly what I'm doing.