All in One Headstrap Add-on for Quest & Quest 2 (& ITS FREE...Kinda)

Подписаться 72 тыс.

Просмотров 89 тыс.

50% 1

The Boneworks inspired head strap add on that provides you a ton of features such as improved audio, a lens cleaner, cable management, a counter weight, power bank strap and AA battery older.
Giveaway: gleam.io/zvmQw...
SteveKnows Store: teespring.com/...
sorry No longer works its been taken down...I think kiwi may of taken the designs and wish to make something so stay tuned!
Headstrap: www.thingivers...
Happy Gaming guys
Good Day!
Thank you to my Patreons!
Hex2906
Theo Irelan
FTFE - YT
VR BALANCE - Accessores
Mattieu Sansen
Chris Bill
DingBoyVR - YT
BoggitVR
Christoper Palmer
Yu Gao
Jose Then
Jerry Wat Vlog
John Mirror
Chris Androsoff
Loser dude
Derek Penaoza
William
Nicholas Ott
VRO MA JOJO
James Bailey
Tony Wong
Steve Bison
Leland Goseyun
JJ jr
Evan Byod
James Hobb
Peter Den
Andres Vastillo
Aurelien Foutoyet
Blank
Steve SilkChris Taylor
Skeeva
ShyneeJaroslaw Nikoniuk
Meet Guy
Brandon
Megan Iserwood
Jay Jaden
DS
Richard Cross
It's Danny
Bacon Slushy
Vioclipse
Patreon: 20% goes to a Charity of your choice
/ steveknowsvr
Join My Discord!
/ discord
FOLLOW ME on Twitter!
/ steveknowsvr
Check out my Instagram!
/ steveknows456
Business Email Enquiries: steveknows456@googlemail.com
#OculusQuest2 #OculusQuest #VRGiveaway:

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@Echo--tz9wy 3 года назад

I would like this and do not own a 3D printer. Trust me the demand will be there

@benbeyer65 3 года назад

Yup

@sk8maniac955 3 года назад

SAME AF SOMEONE PLEASE PRINT AND SELL THIS TO ME

@ryanmalin 3 года назад

There are companies that will print stuff for you on etsy

@brewhog 3 года назад

@@ryanmalin A lot of local libraries have 3D printers as well (In the US). Not sure how prevalent this is across the entire country.

@mauriciorojas4914 3 года назад

Same

@benjibun8189 3 года назад

The demand is def there, the creator could make some serious bank if they price it right (selling it with fitted pads and added electronics that is)

@benjibun8189 3 года назад

@Magica Fox probably, worlds better than the premium strap at the same price. Makes sense

@benjibun8189 3 года назад

@Sir Soma I’m sure it’s fine, it’s just 2-3 times overpriced. It’s the printer and toner business model in action.

@dankyducky3161 3 года назад

@Magica Fox they’d make a loss wheb selling it for any lower than 70 bucks

@Sulu2U 3 года назад

@Sir Soma it's honestly pretty good! I actually think it's more comfortable than my deluxe audio strap

@d1v1s1onby0 3 года назад

I've just taken a look at the files and it simply wouldn't be worth trying to produce this for sale - the problem is the print time it would take about 24 hours to produce one and mean you have to sell it for more than you could buy an elite headset for.

@KawaiiRazorBlade 3 года назад

ive never personally wanted the need for a head strap, but I would 100% buy this if it came into stock

@VoidPetsBack 3 года назад

Same.

@calkramerr 3 года назад

I need this

@2124pooh 3 года назад

Need it

@KawaiiRazorBlade 3 года назад

@Ken Mettier he stopped it cuz there wasn’t enough supporters im pretty sure :(

@Essex121514 3 года назад

That has a very "retro" look to it. Feels like an 80's product. And I LOVE it.

@LemonOfLethargy 3 года назад

yeah, ive noticed that some of boneworks has that vibe to it

@Lifeliver28 3 года назад

Dude I don’t have a 3d printer and I would LOVE one of these

@office_desk 3 года назад

lucky I have one ;)

@daveyonthedaily9525 3 года назад

@@office_desk yooo can I buy one off you?

@office_desk 3 года назад

@@daveyonthedaily9525 Meh, I have two spools of the plastic so Im assuming thats going to make like idk two only or something but you also need like a cushion and it would take time but yeah sure maybe if I can and If I figure out to then sure.

@office_desk 3 года назад

no scratch that, idk how much it'll make

@The_oli4 3 года назад

@@office_desk one spool of 1 kg would be enough for about 2 straps and it takes between 30 and 40 hours to print depending on your printer and print settings using custom supports makes it even better. (this is all acording to my slicer cura with the recomended settings on thingiverse didn't print it myself yet.)

@stevie552 3 года назад

Yeah... I need this, kinda sucks that I don’t have access to a 3d printer

@PoofsBloon 3 года назад

everyone has access to a printer, there are online print services.

@PoofsBloon 3 года назад

@Ball Cat you clearly didn't understand me. there are online printing services that will print the parts for you. So, yes 3D printers are $200+ and be expensive to own one. It doesn't mean you have to own one to have it printed.

@stevie552 3 года назад

Well thanks I didn’t know that was a thing.

@oreomodz5197 3 года назад

@@PoofsBloon you have to own money

@The_oli4 3 года назад

Big tip in my country almost all libararys have 3d printers now a days that you can use fairly cheap also there are a few online services etchy is a good place to find them.

@hern2416 3 года назад

Don't have a 3d printer and this looks like an amazing add on!

@office_desk 3 года назад

I have one...

@Mistiguss 3 года назад

FOR ALL OF THOSE WHO WANT THIS WITHOUT A 3D PRINTER!!! I am going to start printing and selling these, once I get in contact with the creator! Let me know who would be interested by leaving a REPLY!!!

@Gavin-oq5nl 3 года назад

@@Mistiguss I’m interested. Don’t scam me

@xGhostLink 2 года назад

@@Mistiguss Hey! Did you ever make one of these for yourself? I'm here like a year late and the file has since been taken down so I'm wondering if you'd happen to have it

@jgkling855 3 года назад

Please convince them to sell this! I don’t have a 3D printer but I’d love this

@WhiteRaven___ 3 года назад

Just download the stl files and then go to a website or shop that will print the files for you. Not that difficult

@The_oli4 3 года назад

@SkullyTheCreator yes easiest place is etsy and then search for 3d printing, but there are other places around the web.

@Taijifufu 3 года назад

Even the antenna isn't just for show, it's for cleaning the lenses. Ugh this thing is so awesome.

@NiqHowie 3 года назад

I need one!!! The fact they’re offering the print files for free makes me want to buy it from them! Let’s bless this genius

@Mistiguss 3 года назад

@lionsden9945 3 года назад

yes i need one too

@chaser1956 3 года назад

I just finished printing this Headset, it took 2 1/2 days. It is pretty cool and fits the Quest and Quest 2 really well. The sound is increased incredibly well .

@isabellecruz7021 3 года назад

Hey! Do you mind sharing the stl files to me?

@chaser1956 3 года назад

@@isabellecruz7021 You can download it from Thingaverse...

@diamondx224_6 Год назад

Please share the file!

@Motorboot-Hoedan 3 года назад

Gonna print this now. About 20 hours of printing time for the headstrap itself. Can't wait to see it all finished tomorrow ;)

@Michael-The-Composer 3 года назад

Just got here. Have u finished printing it yet?

@Mr.camaron8 3 года назад

It failed didn't it?

@Motorboot-Hoedan 3 года назад

The print failed because it was a hair to large for my Ender 3Pro. But, I splitted the maze in 2, and printed it in 2 pieces. Left half is ready, right half is printing now. Should be ready in 5 hours ! If somebody knows a place where I can put pictures of it, let me know.

@Michael-The-Composer 3 года назад

@@Motorboot-Hoedan yeah put a picture on r/OculusQuest, on Reddit. Then reply to this with the link.

@Mr.camaron8 3 года назад

@@Motorboot-Hoedan Ender 3 gr8 machine. Imgur and post the link

@paudiaz4660 3 года назад

I have a small 3d printing business so I'll definitelly print one of these for my quest 2.

@leongregorio 3 года назад

How much will you charge one fr? I’m interested

@paudiaz4660 3 года назад

@@leongregorio well I put the files in the software out of curiosity and it would be expensive. It's like 10€ in material plus 20€ for the printing time, and that doesn't include any post process like sanding or painting (which is not really necessary tbh). I still have to actually print and see how it really is.

@Motorboot-Hoedan 3 года назад

@@paudiaz4660 I am printing one at this moment. Had to split it in two (Ender 3Pro) because it was a bit to big for my buildplate. Materialcost .. about 2 dollar. Time .. 23 hours (but, it's not like you have to hold the printer when it is printing .. just go to bed, and when you wake up it's ready)

@michaelramos4482 3 года назад

@@Motorboot-Hoedan I actually have the same printer and was able to print it in one piece, I did however have to adjust where it sat quite a few times before it was actually centered properly to be able to print. After I did however, it came out great

@paudiaz4660 3 года назад

@@Motorboot-Hoedan 2 dollars? How many grams of material do you use? Also, It's 13 hours for me, are using the settings that the creator suggests?

@FEBRIZIOtv 3 года назад

I bought a 3d printer because of this. It is printing as we speak. 24 hours... 20 dollar spindle of filament, and entirely worth it to me.

@martinomovies 3 года назад

Ear muffs! Last night I was watching the Cirque du Soleil and I cupped my hands around my ears and the sound was so much better!

@antoniocialfi77 3 года назад

FINALLY! *SLAPS TABLE AGRESSIVELY* THANK YOU! I have been waiting for somebody to design something like this so I don't have to spend a stupid amount on the elite strap.

@RyoCanCan 3 года назад

The quest 2 is such a hit that getting a company to make these using injection molding might actually be viable. Maybe even insert some koss porta pro nubs on the inside of the discs

@greg5756 3 года назад

Man I would love this for my new quest 2 I would for sure buy it if it was available. It has great aesthetic and practicality!

@Cloudman572 3 года назад

You would surely buy it without knowing the price?

@greg5756 3 года назад

@@Cloudman572 Cmon man if it was something ridiculous like 20 thousand dollars of course I wouldn't buy it but if was reasonably priced, sure.

@benjaminmv5950 3 года назад

I defintly would want one of those but i don’t have a 3D printer Edit: didn’t expect that many likes (50 at the time)

@imanangelO7 3 года назад

Same

@azred9618 3 года назад

Same

@VincentBourbeau 3 года назад

Same here

@Angelifox 3 года назад

same

@SeekMVS 3 года назад

Same

@Kwlla 3 года назад

This looks amazing, the demand is 100% there

@kry3s 3 года назад

Add one more to the “I want this to be in production”

@Anipixelz 3 года назад

Just to vouch for the ear muffs incase people think they are meaningless, take your rift s, quest 1, quest 2 and while listening to music put your hands over the speaker and cup it. That improvement is just from your hands, muffs like this will improve audio lots.

@domherrera5026 3 года назад

Steve how did it compare to the elite strap? Would like to see an add on that incorporates the elite strap as well for those who have already purchased it.

@PoofsBloon 3 года назад

it is only held on with velcro and is not as comfortable.

@oreomodz5197 3 года назад

@@PoofsBloon I have both way better

@PoofsBloon 3 года назад

@@oreomodz5197 I guess it depends on the head shape for comfort. For me the print digs into my neck sometimes.

@MrOsmodeus 3 года назад

My power brick didn't seem to work on the usbc output but the usb3 port was fine. Romoss 18w 30000. Catch is its over half a kilo of power

@vrbird5538 3 года назад

If more comfortable the strap would be awesome but if you get the elite strap so there is comfortably then switch to elite charging strap when it is dyeing I plan on testing this

@BaritoneUkeBeast4Life 3 года назад

SteveKnows, thanks for being the 1st VR content provider on RU-vid to finally address the HUGE frustrating power bank issue. There doesn’t seem to currently be any power bank/usb-c to usb-c or usb-c to usb-a cables combinations that work to allow charging while you play on the Quest 2. No one on Reddit or elsewhere online has a solution yet. Hopefully this is something Oculus/ Facebook fixes in an update very soon. Being limited to only 2.5 hours at a time in VR is extremely disappointing after being used to staying in VR for well over 6 hours using the same 20000 power bank you show here in your video.

@brendanashton-collins580 3 года назад

"I would like this and do not own a 3D printer. Trust me the demand will be there" *Echo-5555 * I agree with this man!!!!!!!!!!!

@Mrhighguy206 3 года назад

I haven't had a problem with the Oculus Quest 2 charging from my power banks. I use Anker power banks and wires that are double threaded . My power banks are the 20100 and the 26800. They work awesome and have always kept my headsets charged without either of them running down while playing. Even when I only have 4% battery life on either headset. Thanks for your great work work Steve, keep it up and happy gaming.

@Ygnkamii 3 года назад

The person that’s going to 3D print these and sell them, HIT ME UP!!

@Mistiguss 3 года назад

@Metalbetrayal 3 года назад

@@Mistiguss I want one, let me know

@andrewrodrigue14 3 года назад

@@Mistiguss I would be interested

@MickeyDee420 3 года назад

All the support that people are giving Facebook and the lack of competition preventing the company checking themselves ethically is actually scary

@BlessedBread 3 года назад

Darn, I got my quest 2 not too long ago and see this but I don't have a 3d printer. It just looks futuristic, I need to get this this somehow.

@paulsrivet 3 года назад

@SteveKnows I bought a 2pack Miady 10000mAh batteries on Amazon and they charge my Quest 2. The power cord they come with also has a magnetic usb-c plug, so it makes for a very handy device. Also make sure you're using the correct plug out as some come with 2 USB plugs but one is a lower output. I would also purchase a 3D printed headstrap if it were reasonably priced (maybe they can find an ebayer who will print it for them) - much thanks

@Disatiere 3 года назад

"but you cant really see what you are doing" Passthrough.

@MadMaxBLD 3 года назад

"Do you guys not have 3D printers?" :D It looks pretty cool, kinda like a Swiss Army Headstrap.

@lassehl 3 года назад

DAMN! This thing is so soo much better then I expected WOW! Im really sad dmthi because: 1. I don't have a 3d printet 2. I live in Denmark so it would probably be very very VERY expensive for me to buy. So yeah if you could reach out for them to start doing it again please do it

@drew899 3 года назад

Hey dude I’ve got a printer. If you are interested in buying one I’d be willing to sell you the 3D printed shell.

@williamknight2433 3 года назад

If you don't have a 3d printer at home, look for a nearby fab lab, it's basically a workshop that has 3d printers, lazers etc. They can vary in prices (the one I've been to is about 10 bucks for a 1 hour print) You'll be shocked at how many their are. I found one in my town and I live in a lost place in the middle of nowhere.

@JoesZone 3 года назад

Such a cool mod, well thought out. It's crazy how imaginative the VR/Quest community is. I love the cyberpunk aesthetic. Definitely looks better on the OG Quest

@BootlegHuman 3 года назад

the files are gone but after researching i found a reddit post by someone who had split the files to print on smaller printers this also includes the original files too drive.google.com/drive/folders/148pTwyLZrzAQnBExGxqTjYCEbqyMCleU www.reddit.com/r/OculusQuest/comments/ji28eg/boneworks_oculus_quest_2_strap_split_in_3_parts/

@BootlegHuman 3 года назад

and yes i did like my own comment to try and help boost it to get to the top so other users will see this and not have to search the internet like i did

@BootlegHuman 3 года назад

if you see this comment give it a thumbs up to help other users who check the comments see it without having to filter to new

@BootlegHuman 3 года назад

you will need 3d builder (free on microsoft store)to split the side files for printers with a smaller bed size like the ender 3 as the side files seem to be put together rather than split into left and right, this is easy to do and takes less than 5 minutes to split into two separate files (the back panel is fine) the rest of the files such as the antenna and battery pack are in the original files folder

@The_oli4 3 года назад

Thanks you sir are a legend mine broke and i deleted the files now i can reprint it

@BootlegHuman 3 года назад

@@The_oli4 👆👉

@halomaster6275 3 года назад

Set the store up man right now! No joke Steve the hype is even more real now!!

@Xeylo 3 года назад

i dont have a 3d printer and a quest 2, nor the interest to buy one if ill ever have a quest 2, because im cheap, but it looks really good and cool so i hope it goes on market :D

@Greeny5051 3 года назад

I love how it brings a kind of retro vibe to the Quest

@AndyLeeVlogs 3 года назад

If you don't own a 3D printer, send the files to a 3D printing company to do it for you, then they will ship it to you

@WxckyPenguin 3 года назад

How?

@AndyLeeVlogs 3 года назад

@@WxckyPenguin when the company gets the files they just print it out on their printing beds, then they will pack it and ship it to you

@PeterDenTV 3 года назад

Wow this thing is cool!!! It's always nice to see my name in the patreon section! Good video, Steve!

@SteveKnows 3 года назад

@PeterDenTV 3 года назад

@@SteveKnows your content is getting better in each video, totally worth it 👍

@SeageSpeaks 3 года назад

I noticed when i have my headset on, it stops charging with my battery pack, but when i put it up and it pauses, then it begins to charge. Which is total bullshit, btw. I feel like this is a "feature" to incentivize people to buy the official battery pack/elite strap, that needs to be sideloaded away.

@bazookasniper5167 3 года назад

I bought a brand new power bank and the quest 2 rarely recognises it. Idk why

@SeageSpeaks 3 года назад

@@bazookasniper5167 same. The one with usbc and 3.0. I also tried my old one And if doesn't work.

@andyveale 3 года назад

@Jenn Ro What power bank do you have success with? I'm just about to order one for my Quest2.

@andyveale 3 года назад

@Jenn Ro Thank you

@NotYourIliad 3 года назад

Have you made sure the battery pack pushes enough power to keep it charging under higher load?

@kurisu7885 3 года назад

I do have a 3D printer but it's down and my brother is taking his sweet time fixing it, but this looks like a great addon for the Quest. Makes it look even more cyberpunky.

@Mistiguss 3 года назад

@eamonnmcmahon9005 3 года назад

I would love one I hope that he decides to sell them again but could I get one for the original quest

@Mistiguss 3 года назад

@stefanheston3785 3 года назад

Regarding cabling, there's an Anker cable mentioned on the Oculus Link support page that's USBC to USB3 A. I saw a review mentioning it from Mike on VR Oasis (there's also an extender if you want to use it for Link, can get a 26ft total length combining them for cheaper than the official Link cable, which is USBC direct) and it does charge the headset, albeit slower than the official cable according to the review. I picked the cable and extender via Amazon and can get roughly 3 hrs play via Oculus Link with my Quest 2 using them. They have 3ft, 6ft, and 10ft options. You should be able to find it on Amazon by searching for Anker Powerline Oculus for the main cable and CableCreation Active USB extension for the extender if you wanted to have the extra length for Oculus Link use.

@crazywyvern4704 3 года назад

I want one but don’t have a 3D printer

@Mistiguss 3 года назад

@garrettpike7850 3 года назад

I've been seeing posts of the Elite Headstrap breaking and this was the first thing I saw as an alternative.. TAKE MY MONEY! I'LL BUY 2 JUST TO SUPPORT THE DUDE THAT MADE IT. There is plenty of opportunity for him here.

@dastandardgaming2948 3 года назад

I need one! Make them for sale!

@Cloudman572 3 года назад

So you would definitely buy this without any idea how much it costs?

@dastandardgaming2948 3 года назад

@@Cloudman572 100%

@Cloudman572 3 года назад

@@dastandardgaming2948 Twat.

@dastandardgaming2948 3 года назад

@@Cloudman572 lol

@dickymain8604 3 года назад

Honestly the hardest part about selling is printing and putting together the headstraps in a timely manner. I printed 3 off so far for my friends and I and not only was it costly but it took 2 days to get them ready since we have other things to do as well. We're tweaking the design to make it fit nicer and print faster, but I'd hate to sell the original makers product without his permission. If people are interested comment and I'll make a list to see about using my friend's printer farm to make these instead of the VR gun adapters! :) P.s- I have contacted the original designer and he has given me permission to do this!

@csporto2332 3 года назад

plz. You could do this and headset adapters for like halo straps. Id buy the hell out of this.

@dickymain8604 3 года назад

@@csporto2332 well currently we print and sell those other adapters locally, but are looking to expand. Once I have enough responses I can look into starting up, and on top of that I have permission from the Original designer!

@Iteration_Ashton 3 года назад

I tried the link and it takes you to a 404 page. Does anyone know what ever happened to this? Is there still an stl for it (or something similar) around? I tried a few sites (thingverse, yeggi, cults) and none of them had anything like this. If he took it down to start selling them, where can I get one?

@Hacker-cw9lc 3 года назад

i have a link a reupload, if you still want it lmk

@raybang9891 3 года назад

@@Hacker-cw9lc Hi! thanks for proposing! can you provide me the link, please?

@musicvr3368 2 года назад

@@Hacker-cw9lc Send pls

@muaythaiswe 2 года назад

I would also like a link, this looks perfect 🙂

@Iteration_Ashton 2 года назад

@@Hacker-cw9lc sorry for the late reply, I seem to have missed the notification. If you are willing to share the link that would be very much appreciated!

@williamknight2433 3 года назад

@mri3079 3 года назад

BRUH WHY WOULD U STOP MAKING IT THE AVERAGE PERSON DOES NOT HAVE A 3D PRINTER ON TOP OF THAT THE CREATOR WOULD BE RICH ASF

@Cloudman572 3 года назад

How much are you willing to pay- with postage it would probably be same price as elite strap- do you still want it then? The creator would not make much money as they would have to buy a 3D printer farm or print only about 5 a week. 3D printing is poor on price for large quantites vs mass production- its only really good for prototyping where the price is less important than getting a test piece or for premium price items that individuals really want. Take a look at Shapeways prices.

@jackattack1630 3 года назад

It looks better then the elite strap in my opinion. Definitely going to find a friend with a 3D printer

@Eman0807 3 года назад

First lets go!!!!

@kvxpe0 3 года назад

nobody cares

@ilan_kayesar 3 года назад

shush

@smore8671 3 года назад

Ayyyyyyy lets go i found the first useless comment of the day

@Eman0807 3 года назад

@@kvxpe0 Nobody Asked

@kvxpe0 3 года назад

@@Eman0807 thats right, nobody asked about that u are first

@HowHigh_Juana 3 года назад

Definitely would want to buy. And a battery compartment would be cool because I can change my batteries blindfold now since having the quest.

@DiamondDepthYT 3 года назад

just fond someone on etsy who will 3d print stuff for me! Can't wait to 3d print this and use it, this will be a life changer (and yes, i do still have the files). If I get this 3d printed, and use it with the Quest 2 Grey Silicone VR Cover, I'll probably end up paying like $60-$70 and get the absolute best outta my headset. Thanks Steve!!

@edenlee5396 3 года назад

I would really love to have this, but I don’t have a 3D printer. THE DEMAND IS HERE.

@Kiltem 3 года назад

I'm using a power bank in my back pocket on the Oculus Quest 2, and I've noticed that it won't charge, but it will discharge exponentially slower. Where without, 1% is 1%, with the battery its more like 5% is 1%. So, just a bigger battery and place to power from, but not charge off of. It will charge when not playing off of the bank, however. But during play, it just 'expands' the size of your current battery, in a way.

@Ben-xw2ei 3 года назад

I game with a powerbank USB C to USB C (15W as max output), using the included USB C cable with the headset. Works perfect (charging more then what the headset consumes) :)

@BrainGame92 3 года назад

It looks awesome but people should keep in mind that buying 3d printed parts can be expensive, especially ones this large.

@huskonoir 3 года назад

If headphones get added to this and it went for around $50-$80 (considering the electronics and amout of material used) I would definitely buy this

@Beforethecitadel 3 года назад

He should do preorders. That way he doesn't have extra stock issues and can print to order. But should do it soon. Being one of the first 3rd party accessories will have more business now than if he waits for a year

@pengiiwin3502 3 года назад

i think everyone would like one, the demand is definitely there

@speedyMaldo 3 года назад

I have an off brand 20000 MaH backup battery with PD and I used a random USB C to USB C cable. It charged my headset while I played. It may be that the A to C transition isn't working, or that the battery bank needs to support Power Delivery. Either way, it works for me.

@unclaimedusername6608 3 года назад

Don't have a 3d Printer but I both would like a strap enhancement as well as more bulky technology.

@geraldofrancisco5206 3 года назад

Guys you can outsource 3d print, you don't need to own one. In any case, this looks really bad ass, couple it with salinsk stock and you go from a dork with an ovesized glass and wii-motes, to a soldier of the future.

@lucasvanmessem9486 3 года назад

I DEFINATLY WOULD BUY THIS. I think the demand will be there

@Cloudman572 3 года назад

So you would definitely buy this without any idea how much it costs? Guess that is true of the mentality of people with no idea where the caps lock key is.

@lucasvanmessem9486 3 года назад

@@Cloudman572 ... i don't need your opinion thanks also i of course would consider the price but i don't think someone who judge people on youtube based on if they use capslock would understand.

@Cloudman572 3 года назад

@@lucasvanmessem9486 Twat

@thepsgamers963 3 года назад

I don’t know how expensive is to make something on a 3D printer but if it’s cheap enough I would like to buy one for sure, pretty cool!

@chasz3776 3 года назад

For people that don't have a 3d printer, check your public library or art gallery... some of them have Makerspaces now and will have one or more printers you can use for a minimal fee.

@iiianydayiii 3 года назад

I own a fairly well dialed in Ender 3 and this barely (but does) fits in the build area if oriented vertically. The problem is, the head strap body alone would take more than two days to print. I just loaded this into Prusaslicer to verify.

@SamuelRowan 3 года назад

As soon as I'm done with this fallout terminal replica I am going to start printing this.

@Joseph-oo7pp 3 года назад

Man, if they decide to start selling this, I will get one, especially if it is close to, or cheaper than the elite headstrap

@gordyguyworld7164 3 года назад

I don’t have a 3D printer and would like one too. I really hope they would start making these Quests caps

@Grimtton 3 года назад

I would 100% buy this for my quest 1

@CarloBerroa 3 года назад

hell yeah the the demand is there! I don't want have to go out and get a 3d printer just to make this.

@wolveraza9896 3 года назад

PLEASE MAKE MORE !!!!!!!! It has EVERYTHING that is missing form all the others in ONE STRAP!!!!! PLEASE GET HIM TO MAKE MORE !!!!

@skylerrussell645 3 года назад

The demand is definitely there, I would absolutely get one

@Mistiguss 3 года назад

@ghost23smith91 3 года назад

Definitely need this, I think the demand is definitely here

@The_Jomonge 3 года назад

So glad this works with the quest1 too and the strap to hold a battery bank is just what I need, but I don't have a 3d printer...hmmmm?🤔

@abdullahabohana9068 3 года назад

I don't have access to a 3d printer and I would absolutely LOVE this

@FEBRIZIOtv 3 года назад

I printed this and it's not snug. It's a bit loose on the quest 2. Next one I make I will scale down 3%

@oliver-nation4377 3 года назад

It would be lovely if they kicked up busniss again bc its so much work for getting a rd printer then make all the stuff

@cykagaming365 3 года назад

I don't own a 3D printer and this invention intrigues me

@rickburk8441 3 года назад

I would absolutely purchase several of these! It honestly looks sooo much better than anything I've looked at before. Function + form for the win!

@NappyWayz 3 года назад

That head strap is AWESOME!

@Gavin-oq5nl 3 года назад

If anyone wants to make the charging cable look sleek look up “usb c make to female elbow” something like that it’s a 90 degree elbow and it makes it feel way better.

@elementdw 3 года назад

If the designer isn’t interested, I’m happy to 3D print for people. Have 7 high end 3D printers and about 20 colors, along with higher end materials like Carbon Fiber PETG and Nylon, which should hold up better to abuse and have a little bit of flex.

@patrick8414 3 года назад

Use an anchor usb A to usb C oculus cord. Idk if that’s the exact name but Ik they make them because I own one of them and it works flawlessly. It’s about 10 feet long I think

@jacoblefebvre6411 3 года назад

i would LOVE this headstrap, ive been looking for one for my occulus 2 but i dont have a 3d printer to make it, and it would be AMAZING to have one of these

@drewby4701 3 года назад

This is so righteous!!!! Big motivation for me to finish building my 3D printer

@moosey7165 3 года назад

I would love to be able to buy one of these :D boneworks is my shit

@tk702 3 года назад

Just downloaded the .stl file. I'll print this sucker as soon as I can get around to it. Hopefully, I wouldn't have to make any modifications for it to fit my oversized cranium.

@supercat82b20 3 года назад

Yes please get him back in business I would 100 percent buy this for my quest 2

@corrtteezz 3 года назад

The demand is definitely gonna be there

@roy3307 3 года назад

another thing I wish to have are some hand straps for the oculus quest 2 controllers, like those used for the quest 1, but better fitted for the quest 2