Alpcour Indoor Bike Trainer Stand Review & Assembly

Подписаться 16 тыс.

Просмотров 21 тыс.

50% 1

Review and set-up of Alpcour Indoor Bike Trainer Stand.
Alpcour Bike Trainer shown in video*: amzn.to/3Wbz3dC
Please check out these Amazon affiliate links for the products in the video. Dave's Cycling may receive a small commission at no cost to you if you buy a product using these links. We appreciate you and your support!
Alpcour Bike Trainer shown in video: amzn.to/3Wbz3dC
Alpcour Fluid Trainer (better trainer): amzn.to/40VQVfL
Alpcour Trainer Kit w/floor mat: amzn.to/48bAtur
Woowind Portable Air Compressor: amzn.to/3FFAVV2
Wahoo Sensors: amzn.to/3BKdCbk
Other Indoor bike trainers: amzn.to/3RPoyMf
Alpcour Bike Trainer Stand for Indoor Riding is a Portable Stainless Steel Indoor Trainer w/Magnetic Flywheel for Road & Mountain Bikes.
Related Videos:
Adding a Wahoo Speed Sensor to your training bike: • How to install a Wahoo...
Adding a Wahoo Cadence Sensor and Wahoo Tickr Heart Rate Monitor: • How to Install & Set u...
I found this particular trainer to be easy to set up and amazingly quiet and smooth. I bought this for my wife who does not bike much at all but wants to start joining me on my indoor cycling sessions during the winter months.
The Wahoo sensor I mention toward the end of the video is a simple way to measure speed and distance on the bike, even indoors. It can be synced via Bluetooth or ANT+ to many cycling Apps to track progress.
*This channel may receive a small commission at no cost to you if you purchase through these links.

Опубликовано:

18 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@davescycling 9 месяцев назад

Check out the Alpcour Bike Trainer on Amazon here: amzn.to/3Wbz3dC Also, see other Indoor Trainers: amzn.to/45ypVUm (This channel may receive a small commission at no cost to you if you purchase through these links. We GREATLY appreciate your support!)

@mickinmich8877 9 месяцев назад

Thank you! I've been scrolling through trainers for a half hour or so and your video convinced me to go with this one. I have a very old one that is much larger, it has a mount for the front tire. It works well, but it is quite large and hard to store. Great video, thank you.

@davescycling 9 месяцев назад

Thanks for the comment! My wife uses her Alpcour several times a week and loves it! Rides in the dining room because it is close to her office and it is pretty quiet!! Dave

@funky-phantom 6 месяцев назад

Was really on the fence about this model in particular against some others, thanks for sharing this. Super helpful.

@davescycling 6 месяцев назад

Glad I could help! We love ours! To hanks for commenting!

@shaverx3293 7 месяцев назад

THANK YOU for posting this video!! I’m putting together a Sportneer brand that is exactly the same and the instructions that come with it are basically worthless. This was beyond helpful!! Thanks again!!

@davescycling 7 месяцев назад

Glad I could help! Thanks so much for the comment, really appreciated!

@TheLadysman207 11 месяцев назад

Great review! Thank you for this, super helpful.

@davescycling 11 месяцев назад

Thanks so much for watching the video and leaving such a nice comment! I’m glad it helps, my wife loves this trainer! Dave

@TinkerandBuild 5 месяцев назад

I was about to go purchase one of these off of my local marketplace. Thanks for the video, it helped me make the jump!

@davescycling 5 месяцев назад

Glad I could help! I hope you enjoy it as much as we do!

@barbaralefevre1476 4 месяца назад

Great video. Thank you. I actually understand what I need to do to out this together. 👍

@davescycling 4 месяца назад

Glad it was helpful! I appreciate the comment!

@janicecofiell1978 10 месяцев назад

Today I was looking at videos about this device because I have just purchased one from Amazon now I haven't used it yet or set it up so when I watched your video I found it to be very helpful and also by the looks of it I think I'm really going to like it plus it's going to be super helpful with getting my weight loss journey started so thank you for your review

@davescycling 10 месяцев назад

That's awesome! I’m glad to hear my video helped you out! I wish you great success in your journey! Cycling is a great way to start! Dave

@cliveradvan3414 Год назад

A really good demonstration! I am researching what is available and what you tested highlights that these trainers can be quiet. I have heard some that make a horrible whining sound! Thanks again 🙂.

@davescycling Год назад

Clive, Thanks for the comment. I was quite impressed with how quiet this Alpcour was! I appreciate you watching the video! Dave

@IPC0101 8 месяцев назад

Thanks, very clear instructions for a novice (me)

@davescycling 8 месяцев назад

Thanks! I appreciate the comment!! Dave

@StephanOnisick 5 месяцев назад

Thanks for sharing. I may get one.

@davescycling 5 месяцев назад

I appreciate the comment! My wife really loves hers!

@5minprojects817 Год назад

Good review, well done bud

@davescycling Год назад

Glad you liked it! Thanks for the comment! Dave

@alfredomadrid601 5 месяцев назад

Thank you for the content

@davescycling 5 месяцев назад

Thanks so much for watching the video and leaving a comment!!

@theunknownpassenger552 8 месяцев назад

I love it..

@davescycling 8 месяцев назад

Thanks for the comment! Dave

@uralmutlu4320 Год назад

I've just ordered one of those but a different brand. A special trainer tyre is strongly recommended by most reviewers. It's supposed to reduce wear of the components and also reduce noise.

@davescycling Год назад

Thanks for the comment! I will get a trainer tire if the trainer gets enough use!

@paulseano5100 17 часов назад

Very insightful demonstration. Would you suggest the Alpcour Magnetic flywheel model or the Fluid Flywheel Model? Wondering which would be better for a man with one above the knee, left prosthetic leg. Getting back into riding again. Thanks for sharing. Cheers!

@davescycling 17 часов назад

I think either one would work well! They are both very smooth. I have the magnetic model and have no issues with it at all. Thanks for the question!

@dfriz8513 Год назад

Moved from california to canada 22 years ago and stopped riding at that time. I'm looking to get on zwift to train for this years Ragbrai. Would a smart turbo trainer be adequate, or should i just focus on finding a direct drive now? My bikes are trek 1200 and 2700, and I am currently looking to get better groupsets for hills. Mine is 53/42 and 13-26 cog. Terrible for hills. I wish i would have known this 30 years ago when i lived in California as i thought i was just not good at hills.

@davescycling Год назад

d friz, Zwift will work fine with almost any type of smart trainer that can provide resistance. Personally, I would go for a direct drive for the best experience. I have a Tacx Neo and absolutely love it!! The Wahoo units look awesome and Zwift just came out with their “Zwift Hub” trainer for $499. It’s brand new so buyer beware but looks promising! Dave

@dfriz8513 Год назад

@Dave's Cycling We have 9 months of winter (sept-may), so I was looking to buy the right thing the first time. I have a fluid dumb trainer from 30 years ago but will just end up selling it. I saw that zwift has a couple of dorect drives coming out, but I am leaning towards a wahoo. My bikes are 7 speed, so some mods will have to be done.

@3cordillerasCyclingClub 7 месяцев назад

Thanks for the video! Does this trainer will work on a road bike trek Emonda 2023 that comes with a bolt on the rear wheel? Thanks !

@davescycling 7 месяцев назад

Probably not. I have a Trek Domane with bolt-thru axles, and I do not see how this trainer will work. There would need to be a nut on each end of the axle for the trainer to clamp onto. I am unsure if the Emonda has that but my Domane does not- the ends of the axle are flush with the frame.

@3cordillerasCyclingClub 7 месяцев назад

@@davescycling but, since the trainer comes with a screw. Will this screw work and not damage the frame? Thanks

@davescycling 7 месяцев назад

Take a look at this link. It may be what you need. It is a bolt-thru axle that provides a nut on each end for the trainer to hold onto. Be sure to check which size your bike takes: amzn.to/47WLlfg

@wvfinn613 10 месяцев назад

Hello. My bike has a thru axle, do you know how to change or adapt this for the trainer or buy different skewer? Thank you for a great informative video!

@davescycling 10 месяцев назад

I recall that the manual has directions on what to do if you have a through axle. I will see if I can find more info! Dave

@davescycling 10 месяцев назад

I believe there needs to be a nut on either end of the axle for the trainer to clamp onto.

@wvfinn613 10 месяцев назад

@@davescycling Yes, I found the part on 'Robert Axle Project' website. Would definitely recommend if anyone else has this issue. Thank you again for your great video and taking the extra time to try and help with my question! Also, may I ask if your wife found problems or damage to her tire with using the trainer?

@davescycling 10 месяцев назад

Hello, thanks for the website recommendation! No, so far the tires are fine. I have it set up for the minimum tension on the tire that is required to keep it from slipping. Dave

@jrnumex9286 Месяц назад

i have older bike with nut fasten thru bolt. will this work without changing the skewer hassle?

@davescycling Месяц назад

I should work as long as there is a nut on both sides for the mechanism to grab onto. Thanks for the question!

@ScottJohnson-cf8fk 6 месяцев назад

How come these stands come with a resistance changer when the bike itself can already change resistance from shifting gears? I'm thinking about getting one but I see some are cheaper without the resistance changer/cable to attach to the handlebars.

@davescycling 6 месяцев назад

Relying on only gears to change your resistance will not allow you to maintain the RPM that is comfortable for you. Having resistance on the trainer will allow you to create the most comfortable experience for yourself.

@chopnopork9562 Год назад

Does this work with a fat tires bike?

@davescycling Год назад

The specs are: 26-28” or 700c wheels. And rear Axle 4.92”-6.57”. See more on the Amazon listing in the description. Thanks for the question! Dave

@cliftonjones4235 Год назад

Mine sounds like a chainsaw. The book says to put the flywheel tight enough to make a small flat on the tire you did your basically snug. I have tried all of them and it's so loud I'd rather not use mine. Alpcour offered no help. Any advice?

@davescycling Год назад

Clifton, what type of tires are on the bike? If they are “knobby” tires with an aggressive tread, that may cause some noise. A smooth road tire will work best. If that is not the issue, maybe you have a unit with bad ball bearings. Mine is really quiet and I did not have to fiddle with it at all. Dave

@cliftonjones4235 Год назад

@@davescycling it's a more aggressive tire but I've seen other reviewers mentioning using similar tires with no issues. But since the resistor isn't working I'm sure it's just broken out of the box

@chris59499 9 месяцев назад

No different than the FDW-M8 except the price.

@davescycling 9 месяцев назад

Thanks for the comment. There are a lot of cheap bike trainers out there that work, but the quality is going to be lacking on a $35 unit. I may purchase this one and do a comparison review video. Dave

@weaselhead6771 10 месяцев назад

Good video Thanks!!

@davescycling 10 месяцев назад

Thanks for watching and for leaving a nice comment, I really appreciate it! Dave

@weaselhead6771 10 месяцев назад

My wife bought one and I put her MOUNTAIN bike on it...she loves it Thanks..lol with her tiresthough, it sounds like a V8 with no muffler..lol Cheers! @@davescycling

@davescycling 10 месяцев назад

Yeah, Mountain Bike tires are too knobby for most trainers if you want it to be quiet! Smoother tires are very quiet on this Alpcour Trainer. Thanks for your comments! Dave