No video :(

Alternating (aka Italian) Cast On for k1/p1 ribbing // Technique Tuesday

Подписаться 134 тыс.

Просмотров 115 тыс.

50% 1

Support me by buying me a coffee on Ko-fi! www.ko-fi.com/...
This video demonstrates the Alternating Cast On (often called the "Italian cast on"), which creates a beautiful edge for k1p1 ribbing. The result of this cast on resembles the tubular cast on, but is structurally different, and easier to work, particularly for projects worked in the round. The cast on is demonstrated for flat knitting and in the round. How to tell apart the "knit" cast on stitches from the "purl" cast on stitchess is explained.
To jump right to a specific point in the video, click on the adjacent time-stamped link:
Introduction: 0:00
What is the Alternating CO? 0:27
Alternating CO for knitting flat: 1:35
Why do you come under one strand for a knit, but two strands for a purl? 5:30
Completing the CO: 6:29
Working the first row (telling apart knits from purls): 7:15
Alternating CO in the round: 8:29
Joining in the round without twisting: 9:46
Weaving in the yarn tail when knitting in the round: 11:32
My designs on Ravelry: www.ravelry.co...
If you have questions about this video, or suggestions for future videos, please let me know down in the comments or on social media.
Rox Rocks Ravelry group: www.ravelry.com...
Facebook: / roxknits
Twitter: / roxmpls

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 154

@achimwasp Год назад

I always use the Italian cast on for my socks, but to get rid of twists I just knit a first row without closing the initial cast on to a round so I can adjust the twists as I go. In that first row I also distribute the stitches on the DPNs (or the Crazy Trios). Only at the start of the second "row" I join to a round. This is invisible in the end.

@Shaki611 2 года назад

Your videos are so helpful and clear and analytics of the knitting at "molecular level"😉 explaining the how and the why things are like they are.

@samross5770 3 года назад

The best demonstration of this cast on I've seen. Thanks for sharing.

@RoxanneRichardson 3 года назад

You're very welcome!

@lorrainehutter6677 3 года назад

Thank you! I was about to give up on Italian cast on because I could not find a video I could follow.

@ilofc 4 года назад

Rox, you are the knitting master for a reason. I thought I was adept in this technique but then you ended your cast on with a long tail CO stitch and rocked my world.

@modavis8304 3 года назад

You are so clear! I've tried a few of the big name co.'s tutorials for this and they don't talk you through it. You described every move, just like learning ballet or modern dance! I think I got it now!

@RoxanneRichardson 3 года назад

I'm so glad!

@mairiamdebron1084 3 года назад

Thanks a bunch madam! Your instructions are really clear. This cast on CAN be made tubular very easily: just double knit the first two needles. As in: knit the knits, slip the purls (with yarn in front). After these two tubular set up needles, resume to k1, p1 ribbing, either flat or in the round. (When in the round, the “gap” can be closed afterwards with just one sew stitch)

@maryalgar8779 4 года назад

You are truly a Master Knitter! I didn't know such a cast-on existed. Seems very complicated, but hopefully with practice, one could do it. Thanks for sharing your vast knowledge.

@Kevin-mcro 4 года назад

Answered all my questions as to comparison to the tubular co. Thank you, Roxanne!

@tinytoadstoolcottage8794 2 года назад

I needed this cast on for a hat pattern and I had never done it before. Yours was, as always, the best explanation on RU-vid! Thank you.

@chapman1569 4 года назад

Your video is very well done but may i suggest doing a video complementary to this one. The video would be a slow motion cast on for several stitches so we could follow. Right now, I slowed the video but I have to go back several times to try to remember the moves. Thanks

@ruthmatthews8419 3 года назад

You are a great teacher. Thanks for positing this.

@RoxanneRichardson 3 года назад

You're very welcome!

@suschi6328 Год назад

Thank you for this extremely helpful tutorial. I watch your Casual Friday videos every week and enjoy them immensely. Keep on Roxing 😉.

@wmhfv992 3 года назад

JUST realized that I had been improperly mounting my purls in this cast-on. THANK YOU SO MUCH! I could never figure out why my Italian cast on never looked right once worked up.

@HollyTriedIt 2 года назад

The tip on which way to wrap the needle on the stitch was so helpful. As well as how to straighten the stitches after cast on. Thank you.

@jvallas Год назад

It's funny; I learned do what's called the Italian caston long ago with two hands taking turns adding the knit and purl stitch on and somehow holding the needle still in my lap. I later learned what you're showing, and I think it was just called a tubular caston. Now I'm thinking DUH, they're probably producing an identical caston! (Inals o still love the double knit version with its little channel, and even Judy's magic caston for a quick one.)

@RoxanneRichardson Год назад

Yeah, I learned that cast on more than 15 years ago. It was called Italian Tubular Cast On and used a long tail of the project yarn to cast on around, rather than waste yarn. It was a very different process for creating the tubular cast on, but gave the same result as other tubular cast on methods. This "faux tubular" one in the video is not a true tubular cast on, but it has a very similar visual appearance. The use of the label "Italian cast on" to mean "tubular cast on" (without using that long straight needle process) seems to have arisen in the past couple of years. How do you use JMCO to start a tubular CO? Do you work a few rows or rounds in stockinette, and then alternate a knit and purl off each needle after that? Do you work those first few rows/rounds on a larger needle, and then switch to a smaller one when you start the ribbing? It's an interesting idea. I remember doing something similar years ago, using a different PCO, and knitting flat before folding up the strip to alternate off each needle, but JMCO could be done flat or ITR for the set up.

@graceparisi1590 5 месяцев назад

what an excellent demo! At the 12:40 mark, where you show how the stitch mount differs for purl stitches depending on whether you go under 1 or 2 legs of the yarn is super helpful! Mind blown! Thank you

@elizabethraworth64 3 года назад

WHAT !!! That is amazing ! Thank you for such clear easy to fallow instruction.

@Smuddpie 4 года назад

Very timely video, Rox. I have been trying to use this cast on for a hat with fine yarn and needles and was really struggling with not losing any stitches while I straightened the stitches in preparation to join. This cast on does like to spiral around on the needles. I was ready to give up and use my old standby, alternating longtail, but I will give this another shot. Thank you!

@stitchy_linn 7 месяцев назад

Excellent tutorial, Roxanne, thank you so much for teaching so thoroughly.

@JanetJenkins Год назад

You explained why I was disappointed with the tubular cast on for my hat that I'm knitting in the round. I'll practice this technique before I need to use it ... less frustrating!! I learned that today too!

@knittysixx5106 4 года назад

The how to check for twisting part was particularly helpful

@debracubitt6191 16 дней назад

Perfect timing. Thank you😊

@vadec5909 4 года назад

You are totally amazing!! I would never no how to do this.

@eliedgecomb4903 2 года назад

No one does these tutorials better!

@Nicelady29 3 года назад

I just used this alternating cast on video to cast on a hat and I'm so happy for the clear instructions you always give. Thank you!!

@MarthaSpizziri 2 года назад

This video was very helpful. I think it would be easier to skip ahead and learn how to do it in the round if you started that part of the video with the same steps as you did when showing how to do the cast on for straight knitting, showing how to wrap the yarn around your fingers again and even going over how to do the cast on when the second stitch is a purl versus when the second stitch is a knit stitch. I kept having to go back to the instructions for straight knitting and then back to the section on casting on in the round to see how to finish it.

@roxannetarjan1411 3 месяца назад

Roxanne, Thank you so much. Always helpful. 🎉🎉🎉

@lizmulcahy891 2 года назад

Brilliantly explained! Thankyou so much, have been looking at so many videos on this, and becoming more and more confused, you have just made it all so clear and simple❤️

@pixrainbow 3 года назад

Exactly what I was looking for, and perfectly explained, thank you .

@RoxanneRichardson 3 года назад

Great to hear!

@annikagroebner7534 3 года назад

thanks so much! So clear and as I'm a continental knitter, I appreciate that you are too!

@lailaalrabighi7867 4 года назад

thank you for sharing your experience with us , great tutorial

@drikool3597 2 года назад

Love,love, love your techhnique videos!

@8531022 4 года назад

You’re my guru 🙏

@AuroraBD0618 4 года назад

Wow! Thank you for demonstrating this!

@lovisalagerqvist9505 3 года назад

This is such a great guide, thank you!! Never managed to do this nicely before, using a smaller needle to cast on makes wonders.

@eliedgecomb4903 2 года назад

Right?! I usually use a larger needle so I don’t make the cast on too tight. Never would have gone down a size or two on my own.

@jaejay673 4 года назад

Your tutorials are amazing. Very clear and easy to follow. I would love to see a tutorial on the vikkel braid and working it in the round!

@ezrabaker2617 3 года назад

sorry to be so off topic but does anyone know a tool to log back into an instagram account? I stupidly forgot the account password. I would appreciate any help you can offer me

@achillesgabriel6847 3 года назад

@Ezra Baker Instablaster :)

@ezrabaker2617 3 года назад

@Achilles Gabriel thanks for your reply. I got to the site through google and I'm trying it out atm. Takes quite some time so I will reply here later when my account password hopefully is recovered.

@ezrabaker2617 3 года назад

@Achilles Gabriel It did the trick and I actually got access to my account again. Im so happy! Thank you so much, you really help me out !

@achillesgabriel6847 3 года назад

@Ezra Baker glad I could help :)

@felixdiaz52 2 года назад

Thanks Roxanne !!! Just Incredible !!!!

@moth.stitch Год назад

4:15 - 4:47 for the repeat 😊

@georgyevans 4 года назад

So helpful. So clear. Thank you!

@SR949900 4 года назад

Hello Ms. Roxanne, I love your videos. However, in future videos can you please show the actual joining in the round? I noticed that many videos do not show the actual join in the round. For this cast one, do you knit flat and then join? I have watched similar videos for this cast on, and I haven't found one showing the actual join, so I always assume you knit flat, then join. Thank you again for always providing great content!

@RoxanneRichardson 4 года назад

This cast on is like most cast on methods that produce an edge. After you cast on the last stitch, you then join in the round by knitting the first cast on stitch. There's nothing special about what you do. It's not a tubular cast on, so you don't have to work any set up rows flat. There is rarely a reason to knit flat before joining in the round. Some cast on methods create new stitches on the left hand needle and some create new stitches on the right hand needle. If the cast on sts are created on the left hand needle, then you need to turn the work so that the needle with the working yarn is in the right hand, and then you can join. If the cast on produces sts on the right hand needle, then there's no need to turn the work, you keep the needle with the working yarn attached to it in your right hand.

@SR949900 4 года назад

Thank you for the information!! I am going to work on it this weekend.

@kentmenigoz4015 4 года назад

Most of my comprehension of the technique was soiled from all the knitting lingo/slang that I don’t understand but I loved the video 😂 Also loved your comment on Hank Green’s video from today about ‘19 Rewind

@RoxanneRichardson 4 года назад

Ha! This is the bubble of my RU-vid experience, which is why I don't usually "get" Rewind and why I find the Trending page so...alarming...would be the best way to describe it. :-)

@ragebraid Год назад

Perfect tutorial, thank you so much!

@redredwine1277 4 года назад

Thanks, very helpful info. 🌼🌺🌸 well explained and illustrated.

@KatherineKeefer Год назад

perfect, thank you

@jackydoyle1177 Год назад

Love the option for locking the yarn at then end of the cast on. that bit has been a bane for a while

@nneedler 4 года назад

I’m enjoying n being educated via your videos, thx. Potential video: how to use up yarn effectively; how to identify yarn type (lace vs sock, Aran vs worsted vs dk) so one can use scrap yarns for hats, mittens, accents on pieces, etc.

@RoxanneRichardson 4 года назад

Thanks for the suggestion, Nancy! :-)

@helena_maria_._._ 11 месяцев назад

Thank you! Thank you! ❤🥰💞👏🏻👏🏻

@MsBraverabbit 4 года назад

This helped me so much, thank you!

@RoxanneRichardson 4 года назад

Glad it helped!

@sairkilly4973 3 года назад

I need a longer video with how to use this easier ‘tubular’ cast on for 2 by 2 rib... 😆the longer i could watch your expert fingers, then the fewer times i need to hold on to yarn and push repeat in order to follow. Somewhat dyslexic... need to do 112 stitches on a hat for my first tubular type cast on. Not sure how much twisting is going to happen!

@tinablair4277 4 года назад

Thank you. I'm trying to knit the weekender and can't understand the tubular cast on. I think I can do this one.🎁🎄

@mekastar6751 4 года назад

Hey Rox! Thanks for this video! Can you please explain what types of patterns or garments have this type of cast on? I love all of your videos I’ve learned so much from you!😊

@RoxanneRichardson 4 года назад

Knitters are free to choose any cast on they like, if it accomplishes the same result (in this case, starting a project at an edge). Some cast ons are well suited for specific stitch patterns, because the stitch pattern flows nicely from the edge. In this case, any pattern that calls for k1p1 ribbing, starting at an edge could use this cast on.

@mekastar6751 4 года назад

Ok got it! Thank you so much for responding so quickly!!!🙏😊

@johnpluta1768 4 года назад

Thank you for sharing. Would you be able to make a video of the Channel Islands Cast On from the UK ?

@PurpleAlipineFlower 2 года назад

Great video! It is so much easier than the four row tubular cast on. Any recommendations for resources on how to fix dropped stitches on the faux tubular cast on? Or could you make a tutorial on it, if there isn’t one? Thanks!

@nuuranelchafeii9188 3 года назад

Thank you💛 You're amazing😍

@ViKee010 4 года назад

Hi. Thank you so much for the education. I’m a brand new knitter. I’ve been crocheting for 40 years but just never felt comfortable knitting. I’m determined to get to that point and I have to an extent. I made a scarf which turned out pretty but I can see the errors. My mom loves it just the same. Could you please recommend a book I could purchase that I might learn the basic stitches and patterns and what they are called and how to execute them? Thanks so much. I am a new subscriber also and while a lot of your explanations go straight over my head, I’m starting to grasp a little here and there. I’ll learn🧐😄 God bless.

@user-yp6zy6vo7c Год назад

Your instructions are great, but I'm not having luck with this cast on. I'm using size three needles with fingering yarn and when I switch to the fives and start in the round I end up with a big gap between the two needles and it isn't looking right. I can't figure out why this is happening?

@lizardorita6110 Месяц назад

Really difficult to do an Italian cast on with smaller size needles if you are using cotton yarn, due to yarn getting stuck on the circular needle. Not sure what to do in this case.

@FeannaFey 4 года назад

I actually like the results of this cast on, but I still carry around a little bit of frustration about it. :D I used it for the second pair of socks I ever knit (and before the first pair of socks there were two very simple scarfs and nothing else over a period of years), because the book I brought said it was nice and stretchy. Now, imagine me casting this on onto four bamboo DPNs on an airplane and then trying to join in the round WITHOUT doing a locking stitch at the end of the cast-on...........

@georgiamorandi5795 Год назад

How do you incorporate a bigger needle when doing this cast on in the round?

@helena.3472 3 года назад

Thank you so much for sharing...your tutorials always make me feel that much wiser in the craft. Fabulous 😁 One question if I may, can the 2 needle alternate cable cast on equally be used as a suitable cast on for hat brims as well? Or is the cast on demonstrated here the better option?

@RoxanneRichardson 3 года назад

There's no "better" in knitting, only choices. The choice you make is based on what you need the cast on to do functionally and aesthetically, combined with what you are comfortable doing (and can remember!) and what you're in the mood for.

@helena.3472 3 года назад

@@RoxanneRichardson thank you so much for your reply. I was mainly thinking “better” in terms of elasticity and retaining shape & form e.g in hat brims

@redredwine1277 4 года назад

You're the best!!!

@photoaddict555 8 месяцев назад

Is it ok to knit the twisted rib stitch for the remaining rib? Love this video, you explain this very clearly.

@RoxanneRichardson 8 месяцев назад

Yes, it's okay. :-)

@denisedrapeau5549 4 года назад

Thanks you

@bicyclesinnewcastle 4 года назад

Thank you for this. A great alternative to the tubular. Is it as stretchy as the tubular?

@RoxanneRichardson 4 года назад

There are various methods for producing a tubular cast on. It should be at least as stretchy as any of those, and potentially stretchier. I would suggest working a swatch using the method you normally use, and comparing it to a swatch knit with this method, and see if you see a difference, and which one you prefer.

@latitude1904 3 года назад

I just did it for a brioche hat. I found that I wished I had cast on with needles one size LARGER than the one I would use for my work. This cast on does not stretch nearly as much as my brioche fabric and so I would not recommend using a smaller needle for the cast on.

@linzjan4276 2 года назад

Really love this technique but struggle to absorb the instructions quickly, I wonder if there are written instructions available

@RoxanneRichardson 2 года назад

You can use the gear icon to slow down playback speed, if that helps, or even take notes so that you can refer to written instructions you create from the video.

@ellenstanton2043 Месяц назад

Thank you! I do have a question. If I am casting on a large number (say 200) stitches, I will need to stop and count them, probably more than once . How can I “anchor” the last stitch so it does not unravel while I do this? Can I anchor the temporary last stitch with the backwards loop , and then drop that as I resume the cast on? Thank you!

@RoxanneRichardson Месяц назад

I don't see why not. I usually place a marker every 25 sts, with the 100th st marked with a different color, so I don't have to keep recounting from the start.

@ellenstanton2043 Месяц назад

@@RoxanneRichardson Thank you for your speedy response! And yes, that is exactly how I also mark the stitches.

@lr4386 4 года назад

Is there a K2 P2 rib version of this method?

@RoxanneRichardson 4 года назад

Yes. I'll be doing a video on that in the next couple of weeks.

@lr4386 4 года назад

Thanks.

@elainemcnamee3953 Год назад

Can this cast on work foer finferless mittens, is there a bind off I could use also? Thank you !

@RoxanneRichardson Год назад

The cast on can be used in any situation in which you want to work k1p1 ribbing following the cast on. There is a matching bind off for this cast on: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rMRwAc4JGrs.html

@Kevin-mcro 4 года назад

Please, give links to suggested videos. RU-vid Help says RU-vid has eliminated suggestions/annotations from within videos. Thank you.

@RoxanneRichardson 4 года назад

I created the end screen with two videos linked. I can see them when I play on my phone, but not my computer (via RU-vid). RU-vid says that end screens will not show on some devices, and they give an example of not showing on mobile devices except on the iPad app, yet I can see them from my phone app (obviously a mobile device), but not my laptop (which doesn't really count as a mobile device). I suspect it has something to do with their machine learning system to make things comply with the laws regarding kids, but it's clearly hasn't learned correctly, yet. If you want to see the videos mentioned, you can find them on my channel. One is the grafted/tubular bind off and the other is reversible cast on edges.

@Kevin-mcro 4 года назад

@@RoxanneRichardson I hadn't thought of that. I was watching on my Android. Currently I'm sans desktop and only use my Android and my RU-vid app; provided by my satellite provider (part of the Hopper DVR). I do see the end video suggestions (boxes) in the Dish YT app on the TV. So, the RU-vid Help article is incorrect. That's good to know as I can decide where to watch if i need easy access to suggested videos. I did a search and found your other great videos you mentioned. Thank you clarifying this.

@Smuddpie 4 года назад

@@Kevin-mcro I didn't see them on my android phone, either.

@Chrisesparkle 4 года назад

I usually use 2 knit 2 purl ribbing for socks. Would this work or make it too stretchy or difficult. I also use 2.5 mm needles and so could only go down to 2mm.

@RoxanneRichardson 4 года назад

I'll be doing a video on the 2x2 alternating CO in the next week or two.

@Chrisesparkle 4 года назад

Oh thank you. I really appreciate your tutorials and recent KAL particularly relating to sizing socks.

@Fran-yh8vy 2 года назад

Hi Roxanne, this seems easy to do and you explained it very clearly. One question about using the smaller needle, wouldn't you use a smaller needle anyway for a rib. For instance I am doing a bottom up sweater with a rib. Main part of sweater will be knit with a 4.5mm needle and I was going to do the rib with a 4.0mm needle. What needle size would I use for the cast on? Thank you.

@RoxanneRichardson 2 года назад

The point is to use a smaller needle for casting on than whatever size needle you're going to use for the rest of the ribbing, regardless of what needle size you're going to use for the rest of the project.

@geraldbuttelwerth7670 Год назад

Hi Rox, I noticed in the video that once you have casted on all the sts, you begin the ribbing with the larger needles. I am not familiar with this variation. Why do you recommend this rather than completing the ribbing with the smaller needle and switch to the larger needle when you begin the body? Just wondering….thanks.

@RoxanneRichardson Год назад

The point is to CO with a needle smaller than whatever needle you need for the *ribbing* So if you need a US 5 for the ribbing and a US 7 for the main body, you would cast on with a needle smaller than the *5* (like, say, a US 4 or 3) before switching to the 5 for the rest of the ribbing, after which you would switch to the 7 for the main body.

@geraldbuttelwerth7670 Год назад

@@RoxanneRichardson Thanks for the clarification. Makes a lot of sense to me now. I did notice my CO edge did look too loose when I tried to use the same needles for the ribbing. Now I get it!!

@cindyrosser2471 4 года назад

You don't say how this cast on compares in stretchiness to a tubular cast on. I use tubular frequently for hat brims because of the neat look and the stretchiness. How does this compare?

@RoxanneRichardson 4 года назад

Depending on the method you use to produce a tubular cast on, it could be just as stretchy, or stretchier. I suggest you try it on a swatch and compare to your typical method and see if you notice a difference, and if you prefer one over the other.

@voyager9028 4 года назад

@@RoxanneRichardson I find that this cast-on stretches quite a bit, but does not recover very well. One of my favorite cast-ons is the German twisted long-tail cast-on. Once you get the hang of it, it's quite easy to do. It is very stretchy, and it recovers well. It also looks pretty much the same on both sides.

@sovereigns1grace 9 месяцев назад

Is the stretchiness different between the two methods?

@RoxanneRichardson 9 месяцев назад

Not that I've noticed.

@daisiesushitam984 2 года назад

Is there a matching cast off for this technique? If not, then what cast off would be a good match?

@RoxanneRichardson 2 года назад

Yes. I linked to it at the end of the video. It's the grafted BO: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TAgy5huTlQw.html. To do the grafted BO in the round, there is this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rMRwAc4JGrs.html

@daisiesushitam984 2 года назад

@@RoxanneRichardson Many thanks:)

@donatiennecaron6715 2 года назад

Hi roxanne, your « lessons » are just great! I improved my knitting skills thanks to you! Just one question: which cast-on method would you recommend for a sweater knitted bottom-up in terms of good elasticity at the bottom? I usually prefer and make top-down sweaters but now I have another pattern bottom-up) (knitting 1/1 in the round) Thanks for your help! Dona from Belgium

@RoxanneRichardson 2 года назад

I usually use the LTCO. Any cast on can be made too tight so that it loses elasticity, and any CO can be made to have more elasticity. I do have a video on that topic here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-O9R_Ki4SeW4.html (It's titled as stretchy CO for socks, but the concept is the same, regardless of the project type: you can control the amount of stretch in the CO)

@donatiennecaron6715 2 года назад

Thank you Roxanne, I will have a quick view! Have a nice weekend! Dona

@donatiennecaron6715 2 года назад

@@RoxanneRichardson Hi Roxanne, another practical question. Which method do you recommend for casting on a sweater (bottom-up) with 2/1 rib. I would like an nice elastic board. Is the Italian cast on 2/1 possible? Tnx for your good advice. Dona from Belgium.

@cookiesncream994 Год назад

Would you change anything if you are doing twisted rib instead of normal 1x1 rib? Thank you for your helpful videos!

@RoxanneRichardson Год назад

I would recommend swatching to see whether or not this type of CO edge will give you a result that you like. If you're looking for a reversible fabric, it's not going to look the same on both sides the way std k1p1 will with this CO, but it might give you something you like, nonetheless.

@pearsecrowley4976 3 года назад

Hello. Could you please tell me where I could find the pattern for the cardigan you’re wearing in this video? I really like it .

@RoxanneRichardson 3 года назад

The project page in my Ravelry notebook is here: ravel.me/Rox/lpc There are links to the yarn and pattern from the project page.

@pearsecrowley4976 3 года назад

@@RoxanneRichardson Thank you so much for replying

@shirleyncesar 4 года назад

I have been doing this Italian cast on for a hat that I knit up several times but the instructions also include two setups rows that involve knit, slip in both directions before joining in the round. Doesn’t that, technically, create a tubular cast on construction? I’m not sure what the difference would be..

@RoxanneRichardson 4 года назад

Well, that's the problem with the label "Italian cast on." It refers to several different cast ons. There *is* an Italian *tubular* cast on, as well.

@shirleyncesar 4 года назад

Roxanne Richardson 🤦🏻‍♀️seriously! How confusing...

@sandraroper9866 4 года назад

Hi Roxanne, great informative video. I have a question. Do you have to add stitches if you are adding a cable pattern to a plain jumper pattern?

@Smuddpie 4 года назад

I'm not Rox, but yes you will. The only way to know how many is to do a fairly large swatch with the cable and without to see how much width is drawn in by the cable. Be sure to wash and block them before figuring gauge on each. For example if the cable measures 1/4" narrower than the same number of stitches in plain stockinette, you would need to add in the number of stitches that equal 1/4" of stockinette. I'm assuming stockinette or reverse stockinette since you said plain, but if it's seed stitch or another stitch, you'd do your swatch in that pattern. You would have to add the same number of stitches for each cable you put into the pattern.

@sandraroper9866 4 года назад

Thank you for your help. I will make a large swatch in garter stitch and the cable panel and measure it. I tried a swatch using DK yarn and I was about an inch shorter on the width than the pattern required. I will make another swatch using the Aran yarn that I planned to use for the pattern and see. The pattern gives you when made a 2inch positive ease. Thank you again for your help. Regards, Sandra

@pennyp1766 2 года назад

I have tried following this and I can't believe that I just don't get it. I need about 109 stitches of slow tutorial, not just a handful or less. Guess I have to keep practicing... but I just want to get this sweater started!!

@RoxanneRichardson 2 года назад

You might find it helpful to slow the video down, using the little gear icon at the bottom of the video playback screen.

@lindakildow5980 3 года назад

Why do you recommend casting on with a smaller needle?

@jamface17 3 года назад

The smaller needle can give a neater/tighter cast on edge before moving into the rib pattern. Using the same size needle is still fine though. It just depends on what you like the look of but also your own tension.

@Kevin-mcro 4 года назад

What's the matching bind off, please?

@RoxanneRichardson 4 года назад

The grafted bind off. It's the tubular bind off without the set up rows. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TAgy5huTlQw.html

@satsumamoon 2 месяца назад

It would be helpful if you told us which was the right and wrong side of the work when doing the cast on for a flat piece. E I w hen you say "if your 2nd stitch is going to be a purl" will this be a purl on the right side or the wrong side of the work? THANKS

@RoxanneRichardson 2 месяца назад

In most cases, you'll have an even number of sts for k1p1 fabric, which means you'll always have a purl st as a 2nd st. If you're working with an odd number, then you can think of the CO row as the RS row.

@hookedinaflash 4 года назад

Does this have as much stretch as the tubular cast on?

@RoxanneRichardson 4 года назад

I haven't done a direct comparison. It's certainly stretchy. I would suggest doing a swatch with this technique and another with whatever method of tubular CO you normally use, and then compare.

@brightstar83 4 года назад

Why do you start on smaller needles?

@RoxanneRichardson 4 года назад

Changing needle size typically indicate that the stitch size will be affected. Try doing a swatch where you use the same size needles for casting on and knitting the ribbing, and then do another where you start with a smaller needle, and compare the difference.

@satsumamoon Месяц назад

3:50