Alto 800 Power steering problem? 

Thanks 🙏 Sir

Thanks Sir

Thanks Sir that is your greatness and It’s pleasure to me

Thanks 🙏 Sir

Thanks Sir

Thanks a lot Sir

Need to be increased torque so EPS become smooth

Check for speed sensor 60 80 cut off VSS

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9k8o_TBQJxU.html please refer may be helpful

Provide additional earthing from battery negative terminal to EPS body with thick wire it may resolve problem also all three sockets on EPS power control module need to be cleaned with cleanit spray carbon cleaning for proper contact.

Thanks Sir for valuable comment it really motivated

EPS ko power kam padata hey, horn wiring check out

No motor is ok check 3rd brown wire there is loose connection some where

Same problem here

Same pblm did u resolved

Scrap market whole EPS assembly approx 3 k

Check wiring harness for Loos contact at module shocket also clean shocket or replace module for trial to resolved problem

Engine compartment wala fuse box me main relay ke socket me Loos contact ho sakta, relay ok but socket Loos contact

This maybe useful ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LQCQT2NbWaE.html

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9k8o_TBQJxU.html

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9k8o_TBQJxU.html

Sir EPS module pulse signal wire may be there is loose contact , thin wire 03 number on module or black wire with white strip 12v ignition on wire loose contact

Same problem

Sir as per my point of view need to be replaced whole assembly with old ESS from scrap market around it cost 3.5 k onwards depends available and which company car , if your car is costly then it starting 10 k of old EPS