Aluminum etching with ferric chloride. 

Engraved is doing ,but no deep by ferric chloride , ans. & slove my problems pls sir ,

One word ................ Brilliant!!

Nice video Can you tell me ,can i do the same etching with electricity and salt water on aluminum like yours ??? And can you tell me how many times I can use the same ferric chloride??? Thank you

Hydrochloric acid (Muriatic Acid) will also etch aluminum. You just have to thoroughly neutralize it afterward.

So you are yanking the aluminum plate out of the ferric chloride bath every minute because it gets hot from the reaction. You are cooling the thing in cold water and scrubbing the left over gunk with a toothbrush, then repeating the process. I was wondering if this method is suitable for delicate intaglio etching on aluminum that is much thinner. Guess I will see. My only worry is the asphaltum resist I am using might fail if temp is an issue. Wondering if some good old enamel lacquer might do the trick instead.

.. one of the best time lapse vids i hv come across & of coz the OMG a fantastic etching work .. could hv added sub for info of the processes .. neway, tQ.

Please say what is name of polishing device and company. Thax.

At 3:15 did anyone else hear the Pokémon random battle sound on gba? Lol

Hola estás grabando una placa de aluminio??? Cuánto tiempo de inmersión en cloruro férrico???muchas gracias muy buen trabajo!!!!

nice job

Your job is awesome !!! :O Thanks for the video x) Its really great !!! :D What kind of paper do you use? :o

Awesome video, thank you!!! One question I have as I'm trying to figure out the best way to do a project similar to yours is what materials are you using to create the transfer? Also it looks like your using simple packing tape on the back to prevent etching?

Sound of fast forwarding is terrible. I recommend cutting the audio out or do some explanation of what you’re doing and the products you use. This is not really a tutorial as much it is you showing off what you can do. Nice job though on the sign.

Nice From INDONESIA

hlo dear your video is so nice. but i have 1 question with you and my question is Can we reuse ferric chloride? if we can so how many time we can use? please help me dear i want to start this work I hope you rply me as soon as possible thnks dear

Nice

Hi..what are the components of the chemical..tnx

Ferric chloride works faster if its heated up the the microwave for 20 seconds or so. Also use metal polish afterwards on the sanded aluminium, make it shine like a mirror.

Hi sir ferric chloride can eatinching Steel name plate

Great video, what is the black stuff you used?

Nice work!!!!!

Parada! Uplne cumim, jak se v domacich podminkach da vyrobit profesionalne vypadajici cedule! Vyborna prace! Dotaz: pokud by cedule byla venku, mas nejake doporuceni pro vrchni bezbarvy lak? Aby se na povrchu nedelala takova ta skareda šedá vrstvicka oxidu. Diky.

great video about a dot, that is supposed to be there but it is not and then magically appears_the MAGIC DOT

Great Work.

Which grade aluminium sheet is used... can use this metal nameboard for outside, all whether...? Pls help

If I don't have ferric chloride, can I use HCL acid with H202?

what is that stencil you are using? how did you get it made? It sticks to metals really well or what? I am trying to do that same thing and the only solution i came up with is to get some vinyl and a vinyl cutter...

good job brother 👍🌹

wow, great work, bruh...thank u for sharing 😃👌

Would you be able to use a 3d print as a resist in order to save material? Or maybe wood. Not sure if it will eat through it. Trying to etch .25 inch stainless steel using the salt water electro etching method. Thanks.

Very cool!

That's fucking awesome

what was the music in the background at the end?

Awesome

Could you suggest me a video of making good and effective ferric chloride because I think my ferric chloride is not working well because it's not giving texture every where and not giving same texture as your gives .... kindly suggest me good video for making ferric chloride ...

Was that a vinyl or laser copy transfer.

What's the chemical that you are using

Very nice. Thanks

nice work video too fast

What is the liquid used in timer 5:05? Great work by the way

Very Cool

How to use itching chemical

Dope

Hi, nice work. Quite helpful. Tell me about stencil. Can it be made from vinyl sheets or is it some other material.

Zara dhang se vidio banaiye janab ye kaya sarcas ke kartab dikha rhe ho

Kindly tell me what kind of Black Ink. P.P or P.V.C.

Ok, but how do you get to part 1?

How to use etching chemicals

Нi man.Can i ask how to remove wasting material/thrash/rust from plate?

you rock Matej! can you help me with some details: how long did you leave it in ferric chloride?, why did you rinse it several times?, what paint did you use? and what solution did you use for cleaning the paint from the untouched surfaces?

Nice work, amazing combination of arts and science. Can electric circuits be prepared by etching process too??

Hello Matěj at the end you paint with spray and remove the ink using which product, grateful.

After spray painting... you poured something on from a can ? then sanded with wet n dry. What did you put onto the paint?

big like

So I tried this today with a small 32mm diameter aluminium disc that was 2mm thick. I cleaned it with acetone first then sat it in ferric chloride but it didn't seem to bubble like that and doesn't seem to have done much. What have I done wrong.

Was this piece of aluminum anodized? Also would ferric chloride affect the results if I used a vinyl stencil? I am wanting to do the chrome strips on the side of my truck but im not sure if it will work and Its hard to find intact aluminum pieces for a 73 shortbed f100

Hi what stencil did you use. .or what specific name for that transfer paper

next time use some acetone to remove the sticker just put it in a layer of aceton and the sticker will desolve from the alu plate

does the etching time affect the etching depth

tembak pake mesin grafir.. lebih cepatt

Good day sir ,what kind of sticker you use ?

Zdravím, kde se dají nechat vyrobit ty "vyřezané" samolepky. Případně na koho by se měl obrátit. Děkuji

Hi, I tried on aluminum but it took almost 10 min for 0.30mm dip etching. What should be concentration of FECL3? What’s etching process for Stainless Steel of different grades?

Mantap gan luar biasa

Greetings this aluminum is stainless steel?

should i heat the chloride ? because it changed the color only , what can i do ???

What is ferric chloride used for in the house hold?

This is a Charley Chaplin Video, with a Keystone Corp.

I want traning

ferric chloride? did you dip it in water and baking soda to stop the process before you re-etch?

no help at all. what materials did you use, how long did you do each step for... etc

i want etching on round shape aluminum.deep 1mm so please give me any process for this work

Hlo sir

Can you post link where you buy your Ferric chloride?? And wht is the best deal?

great work,is this plate can used for printing?

The background sound is infuriatingly obnoxious.. Couldn’t watch more than 30 seconds sorry.. I’m sure it was good, but F that noise ✌️

Bb

Despite the demonstration, it wasn't clear just what the steps are.

Not good like yours.

WRONG ETCHANT SOLUTION....

Niceee