Amaizing Palladium score from blue monolith ceramic capacitators! 

Good plan Donnie!! I was the same, now I sort everything!

I would have been a multimillionaire had I pulled the trigger on Bitcoin and I didnt so I appreciate you telling us your regrets and that helps all of us to become lifelong hoarders of everything we can carry.

Master, your follower, how can I contact you? I will send you some pictures.

What is non DMG process?

I want

absolutely right

It’s the reactivity series of metals. You could use zinc, copper, aluminum, lead, tin, even silver technically to cement pd out of solution :)

Thanks bro.

I know tv power boards have these. Probably monitors too.

What do you need it for? It goes into steel. I'm sitting next to 3 pallets of it cause I work at a steel mill. It's used for spring steels like leaf and coil springs.

That would be a good one, the solder could contain lead, tin, and sometimes silver. I've been working on a device that be loaded with circuit boards and under high heat would spin them and deposit the melted solder on the interior wall.

@@donniebrown2896 thats very interesting 👍 do you upload any of your processes?

@@scrappydoo7887 no, just an armchair inventor. I believe the drawback would be the number of circuit boards required to make it economically feasable. I find that even not having a channel or even any content I've somehow had people subscribe to me.😜

@@donniebrown2896 it could be a case of using the boads with the most solder and doing it as a bonus after depopulation and scrapping

HCl actually dissolves the copper oxide not the copper. O2 from the air dissolves in the HCl and then oxidises the copper which is further dissolved by the HCl. It's a cyclic process. AP just speeds it up the large increase in dissolved oxygen from the peroxide.

@@Enjoymentboy thanks for the explanation. I know that Peroxide and air can both used in the AP process, but to use air you need an air bubbler. I guess there is enough copper oxide from the burning to create enough copper-2-chloride to keep the cycle alive without any oxidizer?

@@safetyflipflop Basically there is always some copper oxide present and once that is dissolved by the HCl the cycle begins. There is a decent amount of O2 already dissolved in the HCl straight out of the jug...enough to dissolve the copper oxide. More will dissolve in from the open air albeit slowly and much more and faster when adding peroxide. If you have a saturated Copper choride solution (the dark brown colour) and just let it sit exposed to open air it will slowly turn a deep, rich green and more O2 dissolves into it. It'll look the same green as when using AP. Same process with one being faster and requiring more chemicals than the other. but in the end the same result. Keep in mind that AP will dissolve PMs so if you're trying to ONLY dissolve the copper AP is not your best bet.

You are right you need to wash that with cold path of hcl enough to dissolve aluminum, also copper doesnt dissolve in hcl as he mentioned

How to tell the difference between western capacitors and Russian ones?

You mean by burning something and releasing toxic metal oxides?

حمض النايتريك HNO3

I want you have to sell

Nisam nikako mogao ranije druze,izvini sto si cekao da vidis rezultat tek sada.To je ono sto sam ja dobio i veruj mi da sam istestirao sve filtere i rastvore koji su ostali posle procesa i nisam nista nasao da mi je promaklo,obicno to uvek uradim kada radim nove materijale. I couldn't duit early, buddy, I'm sorry you were waiting to see the result only now. That's what I got and believe me I tested all the filters and solutions left after the process and I didn't find anything I missed, usually always I do when I make new materials. To je ujedno i razlog zasto vise ne primam ničije materijale osim onoga sto ja kupim,vreme i ocekivani iznos su ono na sta ne mogu da uticem,zato se i drzim podalje od rada za druge ljude već duže vreme.

@@999DusanGoldrecovery Rezultat je apsolutno ispravan i poklapa se sa mojim očekivanjima pre nego što sam pogledao video. Ja sam radio na više načina, veće količine i uvek dobijao isti rezultat. Nakon prženja, mrvljenja i stapanja sa bakrom (uz boraks) u leguru i analize dobijene legure na Xrf je dobijen rezultat 17.2g/kg. Tu nema nikakvih gubitaka i sve se nalazi u leguri s bakrom, tako da je pouzdano. Problem je što ljudi kada daju materijal nekome da radi, uvek pritiskaju i govore neke nerealne priče o količini koja se nalazi unutra, a nikada nisu zahvalni koliko god da im se izvuče. Nemaš šta da se opravdavaš Dušane, radiš odličan posao. Pohvale sa svih strana su dokaz toga. Imaš pohvale i od mene. Sve najbolje i veliki pozdrav!

bzdury

2.3 gr. ????!!!!!