Amazing 230VAC LED Strip ⚡️🔌 

Bhai hamko chyai

Thats all nice and good until you have a lot of strips and/or long cable runs

Safer? the currents used in my 12V LED setups are getting silly. 2430VAC with RCBO is much less of a fire risk. the 12V systems are horrendously inefficient too, not just voltage drop but the resistor droppers for each 3 LEDs just burning off electricity to heat. with 240V you can use proper driver circuits for efficiency (no idea what the efficiency of this particular set is though)

​@@sm1thersdude where the hell do you live that 2.4kV is the mains voltage 😂

​@@LoganT547 He meant to say 240v ac. 😂

That's a very good point. I had a valve burst on a washer in the middle of the night. Hot water spraying everywhere. I tried to investigate a little further only to find out that the water was high enough that the deep freeze had energized the water in the ground. That 110v woke me up real quick. I noped my a$$ to the curb, shut the water off at the main and went straight to the breaker and shut off the utility room power. There's just no reason not to use 24v. It's just so much safer. Someone mentioned that you need to do it in order to do longer runs of light, but IMO, you can just use multiple power supplies if need be.

In one video thwy say its good. In other they dont. Depends on who pays for video

They told, the more it shrinks, the less flexible as the original wall thickness is multiplied by the shrinked ratio. There is nothing wrong with that. Different versions for different applications.

@@gabor.nadudvari thanks for clearing that up, I suppose it helps with the mechanical fixing at the plug ends yes?

​@@pawenozynski1038 Yupp... the curse of RU-vid videos. Who pays the most gets that days endorsement! So, so transparent now it's getting to be beyond a joke! 🙄

Ahhhhh neither have I, of course the blackened area on the tip of my nappers is just from cutting the tip of a black permanent marker😅😂

Somehow didn't do it myself but people working next to me did that enough.

230v so then it’s on a two pole what 30 amp breaker

@@Weasel_NM575I suppose you’d feed it in swa saying something like that 😅

Green/yellow is earth/ground Blue is neutral The other wire should be red or brown - that's live/hot

@@TheLegocar awesome thank you

ｄｏ　ｙｏｕ　ｎｅｅｄ　ｌｅｄ　 ｓｔｒｉｐｓ？ｗｅ　ｈａｖｅ　ｏｕｒ　 ｏｗｎ　ｆａｃｔｏｒｙ

It meets the required lighting standards - see link!

I guess you could maybe use phase angle control. but thats really just a guess

50 meters from one connection

Probably longer than three years 😅

Nothing other than this company paid them to make a video about this one.

@@efixx that's exactly the same as ones sold here - 50m roll comes with adapter, some plugs, some clips.

@@andycrask3531 not sure, been avoiding (rectified!) mains voltage outdoor lighting that unqualified people have access to.

What would you think it should replace the LED strips. If you ask me, it is getting wild.

It looks like a bottle of cyanoacrylate to me, AKA super glue.