Fill the bottom with water including pipe. Cover both the ends of pipe and bottle, put the pipe in water and release both the holes together.. it's just science.
The source must be elevated for a siphoning to work, in this scenario it will just suck some air at the opening of the bottle and will stop the flow,, this isn't going to work and that's basic science,, Remeber water is denser than air so without pressure the air would go up and water will go down,, it wont suck from the water source,, it will suck air
Is there a hydraulic equation I can use to calculate the how much water is needed in the soda bottle? Different elevations and tube lengths may require larger soda bottle reservoirs to create more suction. I'm 100ft from the stream and 10 feet in elevation. Do I need a 5gal bucket... Or a 50gal trash can? (Assuming hose diameter is 1/8 in.) 😂
Banyak orang bilang cara ini hoax .. padahal cara ini tidak hoax .. saya sudah uji coba meski gagal sampai 2 kali baru berhasil , setelah saya telusuri cara ini sangat bagus ...
This might not work for some as it jsut makes waves but if it only makes waves you can do a thing where you search other no electricity air pump and do that one, but if you still have this one instead hang it of the side of the tank, grab any plastic container that's waterproof, add some sponges on the bottom (size will differ according to size of pump) on top of the sponges add some aquarium filter stones, then on the bottom of the plastic container make 3 holes, get straws, cut till only the tip of the straw, either stick in the straw or for better results glue gun the tip. This isn't a one things filter and oxygen thing I'm pretty sure, but having a filter without electricity would be cool. Hope this helps, for more about no electrical pump keep searching till it kinda becomes a underwater pump with bubbles 🤔👍
Easy you just create suction from the bottom hose then once the syphon has started and water begins to fill the bottle you put the bottom hose in the water
@@captainchrisfishing Nope. The weight of water in the bottle pulls it into the top. Creates vacuum. Fittings must be airtight Eventually the water level will fall enough to make it stop working.
Tôi đã thử rất nhiều lần nhưng đều thất bại .ko biết điều này có đúng không . vì Theo nguyên lý nước không thể chạy ngược nếu ko có tác động của áp xuất hoặc lực đẩy
Their is with the metal ball bearings running down a metal track that is looped so it launches the balls back to the top. The balls are guided ed to a hole in the middle which they fall through. Onto the tracks creating a continuous loop without such thing as a battery.
Ah, the well known perpetuum mobile. Who would have thought physicists were wrong all these centuries and they CAN actually exist, consisting just out of a plastic bottle and two plastic tubes... (Warning, this comment may contain traces of irony)