Amazing Tricks How To Pass Two Doors Jambs with Vinyl Plank Flooring| LVP in a Narrow Hallway DIY

Подписаться 63 тыс.

Просмотров 142 тыс.

50% 1

In this video, I will show you amazing tricks on how to easily pass two doors jambs with vinyl flooring planks|LVP in a narrow hallway and you will have flooring without transitions. After watching it you can do it by yourself!
Similar home improvement DIY MrYoucandoityourself video: • How To Installing Viny... -How To Installing Vinyl Plank Flooring|LVP Transition for a Big Elevation Easy DIY
Tools I used for passing door jamb in this video:
- Dewalt Miter Saw - amzn.to/2i7JonF
- Dewalt Table Saw - amzn.to/2h3aOgy
- DEWALT 20V MAX XR Jig Saw - amzn.to/2x2AHaA
- Vinyl glue - amzn.to/2Y8vWGm
- Crain jamb saw - amzn.to/3eWafAs
You can find the whole list of MrYoucandoityourself videos here:
/ mryoucandoityourself
Subscribe to my main channel if you're not: / mryoucandoityourself
My Facebook: / mryoucandoityourself
Thanks for watching! Please give this video a thumbs up, leave a comment, and add to your favorites! Please share this video with your friends, family, and animals it really helps me out! =]
All MrYoucandoityourself videos are here: www.youtube.co...
Visit my website: www.hardwoodflo...
ask this old house, how to end laminate flooring at doorways, installing vinyl plank flooring around door jambs, how to cut sheet vinyl flooring around a door frame, installing laminate flooring around door jambs, how to install laminate flooring door threshold, cutting door jambs for laminate flooring, installing floating floor under door jambs, how to install laminate flooring around closet doors, renovation

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@ThriveTalesTV Год назад

cowboy

@MrYoucandoityourself Год назад

I hope it’s helping you.

@mycats7321 3 года назад

Thank you. There were a lot of doorways and obstacles in that area and the installation was beautiful! I'm going to be installing vinyl plank in an area with 5 doorways so I wanted to see some tips on how to cut around door jambs. This was helpful.

@MrYoucandoityourself 3 года назад

Thanks for great comment!

@TC-iz6xe 2 года назад

I thought i was listening to Borat

@MrYoucandoityourself 2 года назад

You have a musical ear!

@MrYoucandoityourself 4 года назад

*Just couple of useful tricks which will help you to pass door jambs and install beautiful vinyl or other flooring planks.*

@ovisha 4 года назад

Great tutorial!

@timwilson6634 4 года назад

MrYoucandoityourself: Many thanks for your Tutorial on self-leveling cement. My dining project and vinyl plank flooring installation went exceptionally well. I truly appreciate you answering my questions and for your tutorial. You are amazing! Take care, Tim

@dean9498 3 года назад

I needed this vinyl glue yesterday. I am going to purchase some. Never knew they made it? Even after doing floors for 30 years. I'm always learning something on your channel. You have excellent videos.

@MrYoucandoityourself 3 года назад

Hi Dean, Glad I could help!

@warwickwas Год назад

What a great video. I've just finished doing something very similar to this (Before I saw this video). All other videos show how 'easy' laying these floors are, but they conveniently don't show the 'problem' of laying in a doorway on the opposite side of where they started. Because the plank has to slide under the cut out parts at the bottom of the door jambs, it's impossible to slot in the board to the previously laid parallel board. I had to figure this out myself. Your method is great and almost identical to my method, but I actually used the normal end-of-plank join (I didn't cut a board in half). I just chipped off one side of the end join a bit so that they still slotted in together (A bit hard to explain really). Like your video at about 4:31 I started with the Right hand board on top of the left hand board and slowly tapped it across the left hand board (towards the right) until it went completely past the LH board by a mm or 2, and then tapped it back into the join.

@MrYoucandoityourself Год назад

Thanks for watching and your advice!😀

@CASLUCASTON 4 года назад

I noticed you use MAPEI NOVOPLAN 2 PLUS Leveler, the only MAPEI types available in my area are "ULTRAPLAN 1 PLUS" and "SELF LEVELER PLUS" Could you please tell me the differences and which one I should Get? THANKS AGAIN! ...(I am installing "Pergo Outlast" Laminate Flooring)

@MrYoucandoityourself 4 года назад

Ultraplan is premium material and getting ready for installation faster then Novoplan 2 plus: www.specifiedsurfaces.com/self-leveling-underlayments

@Vortex-gz8se 11 месяцев назад

None of these videos show how to do this when your vinyl plank flooring requires attaching it at an angle. Can’t do it like this if you have to attach it at an angle. Because you can’t get it under the trim.

@MrYoucandoityourself 11 месяцев назад

All projects are different, but with an angle connection under the door jamb, you can use the same method.

@Vortex-gz8se 11 месяцев назад

@@MrYoucandoityourself How? You can't tilt the plank at an angle when it is under the door jamb.

@MrYoucandoityourself 11 месяцев назад

Cut the lock on the board and slide it in with glue.

@safetyhomeloans950 4 года назад

I"ve been watching tons of videos and even making my own youtube library of Laminate tutorials yet this gentleman is AMAZING!!!! I love the attention to detail and the true real-life scenarios. Gracias Mr. Youcandoityourself your contribution and knowledge base will echo throughout ages. Muchas Gracias!!!

@MrYoucandoityourself 4 года назад

Thanks a lot for your positive comment!

@OldManLuffy 2 года назад

Flooring that's harder to lock together at the ends of the planks isn't as easy when using this method

@MrYoucandoityourself 2 года назад

Hi Geezer, read the instruction for your material. Many types of LVP need hammering the ends of planks. I did installation LVP this week - the same type of installation, I used a rubber hammer to lock the ends. Thanks!

@josevital4108 2 года назад

Thank you, I've spent countless hours forcing full pieces in door jams, this tip just saved me 15-30 minutes per double door jams... Been installing since 2012 and I just learned the best tip to save myself countless headaches and procrastination... THANK YOU! I will always have that glue with me!

@MrYoucandoityourself 2 года назад

Hi Jose, this channel I special made for saves your time. Thanks for watching and commenting!

@dizzystrings3797 3 года назад

thanx for a great idea.... i just did the same thing...only i planned my row in a way to have a joint somewhere in the doorway and managed to somehow hammer them together. pain in the ass but awesome result.

@MrYoucandoityourself 3 года назад

Hi Dizzy, thanks for your comment!

@bloomingrazz2609 2 года назад

3:38 how did u cut that sir. Can u plz show it? Thanks

@MrYoucandoityourself 2 года назад

Hi, I have many videos where I showed how to measure and cut. Please check it out. - 6.59 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8C5nZKq9ZtE.html Thanks

@flooringart4026 4 года назад

What nailer is the best for laminate and vinyl plank on stairs and baseboards, 18 ga.

@MrYoucandoityourself 4 года назад

I am using 23 Ga.

@dhambone825919 2 года назад

Did you install wall base, or was it existing?

@MrYoucandoityourself 2 года назад

Yes, I did it after floor installation. Thanks

@europeanflooring.5385 3 года назад

HI. Where did you find the glue? Thanks

@MrYoucandoityourself 3 года назад

- Vinyl glue - amzn.to/2Y8vWGm

@hectorrojas9818 4 года назад

What if it’s a vinyl plank product with beveled edges?

@MrYoucandoityourself 4 года назад

This floor with beveled edges too.

@ShaneHolly 3 года назад

Well he may be saying what if the bevel is a color.. so if you had say a light floor with beige color bevels and you cut the board and make ur own bevel with a small hand planer it won't be the same color as other bevels it will just be the dark inside plank color.