AMD Sapphire Pulse Radeon RX 580 4GB|Cleaning,Changing Thermal Paste,Pads|Disassembly,Tear Down

Подписаться 48

Просмотров 19 тыс.

50% 1

-If you have any questions or any advices write them down in the comments!
-If you enjoyed the video a like will be apreciated!
Music • BGM | VLOG | No.12 In ...
-Intro Made By: VipexArtz
-VipexArtz`s channel: / vipexartzoriginal
-Outro Animation: • Rounded Neon Multicolo...
-See you in the next one!
-PC Specs:
-CPU: intel Core i3 10100F
-Cooler: Arctic Freezer 34 eSports DUO
-GPU: AMD Sapphire Pulse Radeon RX 580 4GB
-RAM: Patriot Viper Steel 16GB(2x8) 3000MHz (Using them at 2666MHz,because of the motherboard)
-CASE: Lian Li O11 Air Mini
-PSU: be quiet! System Power 9 500W
-MOBO: MSI H510M-A PRO
-SSD: ADATA Swordfish 250GB
-SSD: Sillicon Power A55 256GB

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@drag1286 Год назад

Perfect music choice! Thanks :)

@GHz.Gaming 3 дня назад

❤❤❤

@jackiealicaway8797 Год назад

May gpu is rx580 may problem is overhear 81 to 82c

@herzsuarez739 2 года назад

Isopropilic alcohol is what you need for cleaning the thermal paste faster, good video, btw

@ryzeeboi7637 2 года назад

Thank you,i used isopropyl alcohol,but the paste was really old,dry and stuck.

@blackeagle6809 Год назад

@@ryzeeboi7637 use Zippo fuel to soften the old thermal paste. put a kitchenpaper on the Die and keep it wet for 10 minutes. then use cotton tips to clean.

@jakubbycina7668 Год назад

i use WD40 contact cleaner is good as well

@Shinji_Tak Год назад

Bruh, cleaning that case just put in the water, not include fan. And dry in 1 day

@kaskalo2 25 дней назад

Asmr level of enjoying 😊

@et2693 Год назад

Thanks, i got the same GPU from a miner and it wasn't working. Cleaned it up and reapplied paste n it started working again.

@adrian3126 8 месяцев назад

same situation, what problems did u have? mine is crashing in furmark reaching 86celsius and also crashing while exporting in premiere with fans spinning at max and losing signal

@et2693 8 месяцев назад

mine just wouldn't boot man no clue what the problem might be for you @@adrian3126

@user-vb7xs3ls4p Год назад

This morning I opened overwatch 2 and I got an alarming 82 degress in lobby So I opened the card changed the thermal paste and now I'm not surpassing 61 degress I'm happy

@fgg63 2 года назад

Many thanks for this video!!!

@ryzeeboi7637 2 года назад

You are welcome!

@cupima 2 года назад

@@ryzeeboi7637 Thank you aswell. A lot of used cards enter secound hand market and this was perfect for fixing thermals. By the way did it improve efficiency for you?

@ryzeeboi7637 2 года назад

No,the efficiency didn’t change.

@martinmatha2714 5 месяцев назад

0.5 thermal pad is too thin, there will be no connection between the chip and the cooler. I recommend using 1mm from Artic. This thermal pad is softer than the original, so you don't have to worry about 1mm thickness. A comfortable squeeze will occur.

@rubenel7993 2 месяца назад

Wrong, terrible advice. Many cases of crashing on RU-vid by using 1mm on Saphire RX 500 cards (their stock pads are 0.75mm from fabric). Do not use 1mm on these cards it will not squish enough for the heatsink to make proper contact with the processor. 0.5mm does the job here.

@vonndatoy 9 месяцев назад

sir, im from Philippines. do you have idea what size of Spring Screws that mount in case and back plate? is it m2*6 or m2*8?

@porktesinorn870 Год назад

Sir sapphire pulse rx580 uses 0.75mm for VRam and 1.0mm for VRM right? Its hard to find 0.75mm for VRam. Did you use 0.5mm for VRam? How about VRM did you use 1.0mm?

@ryzeeboi7637 Год назад

I used only 0.5mm.

@KaRuNaRuGa Год назад

That's what I did, until the VRAM chips overheated and produced artifacts. Can't even run 4K benchmarks in superposition without it crashing the program. I now use thermal putty instead, which lowered temps more than previously. The only caveat is that it's a mess to clean.

@pongko482 Год назад

@@ryzeeboi7637 im use 0.5mm for vram but did not have contact to heat sink. officially shapphire use 0.75mm but they say its safe to use 0.5mm

@rubenel7993 2 месяца назад

what was the GPU you used the 0.5mm pads on?

@apprendrelavideo463 2 года назад

Can the Radeon RX 580 take any video source IN through its HDMI or displayport ? Or are they only outputs ? Thank you

@ryzeeboi7637 2 года назад

DVI-D port,two HDMI ports and two DisplayPorts

@one_step_sideways 2 года назад

Output only. You would need a dedicated capture card if you want to capture any footage that isn't generated by the GPU.

@matinarvaez6 Год назад

I need to change the pads to an rx580 8gb sapphire, which one does it have specifically?

@tanja-k Год назад

Try 0.5mm, 1.0 thermal pads are too thick according to online sources

@matinarvaez6 Год назад

@@tanja-k thx

@jt9264 Год назад

@@tanja-k could I get away with only using thermal paste instead of pads in a pinch?

@ryzeeboi7637 Год назад

You can, but I don’t recommend it, because it will make a mess and will be not that effective probably.

@ryzeeboi7637 Год назад

I used 0.5 mm pads.

@renko8065 Год назад

before and after temperature?

@ryzeeboi7637 Год назад

Before was 85 degrees and after was 70.

@gabriledyt 10 месяцев назад

@@ryzeeboi7637same,I will do it

@nimbo9061 Год назад

bro added thermal pads to the capacitors instead of vrms. big fail brother

@genofin6056 7 месяцев назад

is a 1mm thermal pad too thick for this gpu?

@rubenel7993 2 месяца назад

Yes. Ive seen many cases of crashing by using 1.0mm on Saphire RX 500 séries. Use 0.5mm thermal pads If needed.

@user-yo7tp3ti7h Год назад

Прокладки не на дросселя надо устанавливать, а на микросхемы DC-DC ШИМ(PWM) микросхемы!!!!

@JealousWafer 6 месяцев назад

hows the gpu now?

@harshkharwar5951 6 месяцев назад

willl opening cause warranty void

@polska_gora_1512 Год назад

What temperature is danger for this card?

@L4ftyOne Год назад

100-110 like every gpz. For everyday use dont get over 85

@polska_gora_1512 Год назад

@@L4ftyOne ok thanks

@gabriledyt 10 месяцев назад

I recommend 70°C

@BeinMix-uz1kz 5 месяцев назад

@bu56 5 месяцев назад

my rx 580 runs at around 86-88 degrees is that normal or is that bad

@aitran2703 4 месяца назад

Is bad check you thermal paste, fan, and airflow.

@hayemiranda7647 Месяц назад

At full load not ideal, too high. If thats the temperature at idle, then something is very wrong.

@bu56 Месяц назад

@@hayemiranda7647 at full load and the fan is hella loud like 3200 rpm and 85 degrees but I have this like msi version or something and it's known to be loud and hot 🔥🥵 so I think I'm good cuz a lot of people used it like that for couple of years

@pongko482 Год назад

you wrong put vrm thermal pad

@JFGrijaldo 2 года назад

what thermal pad thickness should be use 0.5mm?

@ryzeeboi7637 2 года назад

Yes,0.5mm.

@JFGrijaldo 2 года назад

when i remove the heatsink cover that metal bar part comes over it how can i put it back on pcb board? i temporary put thermal paste on it to prevent over heating issues thou