modification pour rendre utilisable la prise péritel du tuner TV mp-3
ENGLISH TRANSLATION IN THE DESCRIPTION !
la modif RGB ne fonctionne pas avec mon lecteur DVD
THE RGB THING WITH THE THREE WIRES DOESN'T WORK WITH MY DVD PLAYER!!!
-pour le RGB juste trois fils mais faut voir ce que ca donne au niveau de la synchronisation et si il vaut mieux pas mettre un switch pour passer la synchro aussi direct de la péritel au din 6
-pour le composite malheureusement l'appareil est en SECAM seulement et donc je n'ai pas d'appareil qui sortent du composite SECAM
English translation
THE AMSTRAD MP-3 TV TUNER
By defaults, the SCART plug of this machine is disabled, in this video i wanted to show how to make this plug usable.
-for RGB you just need to run a wire from the SCART connector to the corresponding pins of the DIN6 connector (see the pinouts on google) i did it for the Red, the green and the blue but not for the sync and i don't know if it will cause a problem, i guess fo the sync you'll need to switch on the SCART (i'll explain it in the second part) but at the time of the video i couldn't find any RGB device so i couldn't test, and maybe i'll put a switch to directly transmit the sync signal of the RGB direcly to the front then the TV Tuner will need to be switched of and will just act as a regular adapter cable (but much cheaper) but the sound will not play from the MP-3 guess i'll have to test...
-to enable the SCART plug and input a composite signal, you'll need either a 9V battery or a 9V power supply and connect the + to pin 8 of the SCART wich correspond to FUNCTIUN SWITCHING and the - to pin 17 (or any other ground connected pin in this particular case) the problem is in my case (don't know for other regions) my particular model is a SECAM one and all my devices (except mu VCR) ar PAL ones so i only get black and white. To switch back to the TV antenna you'll just have to deconnect the 9V PSU or battery...
Disclaimer : i'm not responsible for any irreversible damage you made modifying your machines
6 окт 2024
