Anker Prime Power Bank 27,650mAh 3-Port 250W Portable Charger (99.54Wh) Smart App Compatible 

Great video. Love the chance to see the power bank being updated. Can’t wait to get mine.

Love the energy! Nicely done! 😊

Thanks for this review. I got one as soon as I saw the discount you showed which is a great deal in my book.

Went out and bagged myself one of these bad boyz. This power bank is a game changer especially with the ability to upgrade firmware that manages the power distribution. What a quality product. It impressed me so much that i bought a couple of the Anker 30w nano power banks and I get about 2 charges out of that for my IPhone 15PM. Totally awesome devices wow 🤩 ❤🎉

Finally got it myself as well. Thank you for showing me what it can do :p

Ordered mine from Anker, with the charge deck coming from Amazon. 😊

I just ordered one of these a few days ago and was waiting for a good review to be posted and this showed up this morning

I love mine. I haven’t had any issues with it so far. I still need the charging base

How many charges can you get when charging your iPhone 15 pro max?

Thnx you for great video

I have the 20,000 mah model and I love it even though it has no bluetooth

Can you please change the Anker 548 with the solar panel fully please and thank you

This power bank can actually charge at 170W if you use both USB C ports at the same time

Your able to the change the port status on C1 to input or out output only .. idk if this was just and update

I’ve got this powerbank yesterday I’ve charge the powerbank on both USC C almost 170W input by using single powerbrick the Chargeasap 270W Zeus Gan charger.

12:53 My guess is that the input optimized charging only charges the powerbank to say 50%, for example, between MN and 5AM when set to MN-6AM, then charges it from 50% to 100% from 5AM to 6AM so it's ready to go at your 6AM wake-up time. This prevents the powerbank from holding a 100% charge throughout the night while you are sleeping in order to increase the battery lifespan. It does the same thing with output charging to help preserve the battery in your cellphone.

Thanks for this, I bought one plus the desk charger which is fast enough for me! It almost went back as dead on arrival though since I could not get an initial charge into it. I eventually tried with a cable connection to the desk charger and it sprang to life. Seems like it depends on having some power in the battery in order to command the desk charger to deliver power on the spring pins. Also I almost did not buy because the spec says it only gives 1.5A at 12V, which is odd because at 9V and 15V it is rated to 3A. But pleasant surprise, when I tested it using a 12V decoy cable and an electronic load, it was quite happy delivering 3A at 12V! Then I tried my TS80P PD soldering iron. This has been hit and miss in the past: a lot of PD power supplies do not support 12V and of those that do, many would not do so for the TS80P falling back to 9V (and slow heating times). I was pleased to find the iron works nicely with the power bank, reporting it is getting 12V and nearly 30W (2.5A). But the display on the bank and the app both show C1 delivering power, but 0A, 0W! The iron is definitely hot though so it is getting power from somewhere!

Wow its a great video 👍

It doesn’t seem to charge if you use the 250 watt charger and put into the 150 watt port.

If you go to Port Status under Settings you can set USB-C1 to input, output, or input/output. One quirk I found was that even when it says 100% full while charging it pulls another 20Wh+ after from the charger as measured with a ChargerLab KM003C. Meanwhile it's not showing any input at all. Its temperature remains high and Cumulative Usage Data - Input Power still increments. Sneaky sneaky! I'm guessing it shows full at roughly 80%. Thing is it doesn't trickle charge once it says 100% either but goes full bore as it did before. So if you really want to ensure that it's done charging leave it on the charger for an extra 20min or so. Why Anker did this I have no clue.

I just learned something new if you keep cycling through the power bank screen eventually the eyes would show up so cool found out accidentally

I just ordered the gold one

Dumb question probably but is a 25watt charger too small to charge the power bank?

Is this system future proof?

Link to that basus charger?

Just got mine, they have a great deal with the base, mine came dead...so not happy about that,, a power bank should never be at 0....

Man i wish Anker would make this but with double the capacity. I dunno if they are worried about making too much of a brick. Or bad press causing an incident on a plane etc. But i just think its kind of pointless having that high an output for such a low capacity. Like you wouldnt even be able to fully charge a 16" MBP (99WH battery) with this. Plus you will knacker the battery either draining it to 0% all the time. Or even just high charge/discharge rates. Should be 200-300WH IMO.

I bought this powebank and its the best powebank ive bough but c port support 2.0 fast charging and the app cant beat this powebank

No efficiency test?

These things are getting so cool I miss when things were more "Tech" if you know what I'm saying

If flying the limit is 100wh

The battery isn't very large tho

Well now they did an update which lets you control what the c1 port does ! Now u can set the first port for only input or output !

I whanted to buy it but on recharging the temp reach 40C so no thank u , i bought 737 first gen

They need to give it 3 usb c ports

It will charge at full 170W when it reaches 55%

Anker :D

Anker is slowly failing off

Yep soon as i saw it on sale i bought it lol