ANTEC NX500M ARGB - Back to Budget with mATX Layout!

Подписаться 38 тыс.

Просмотров 10 тыс.

50% 1

ANTEC NX500M ARGB is the new case in the budget segment but this time with mATX layout. Quite cool possibilites and loads of connections on I/O panel which will make this case desireable. But do check the review to learn more about it.
Where to buy:
►ANTEC NX500M (non-ARGB): geni.us/zljckdY
►ANTEC NX500M ARGB: SOON!
All my builds use CableMod custom cables:
►Link: geni.us/TAYTe
►Subscribe here: bit.ly/3erJB33
Check out my other channels:
►PC Crazy Racing: bit.ly/3Buykfn
►PC Crazy ASMR: bit.ly/3HqYVxt
►Join my Membership to get access to perks:
/ pccrazydario
My recording gear:
►Camera (video): Blackmagic PCC 6K Pro: geni.us/yZlAn
►Camera (photo): Canon EOS 90D: geni.us/QETkjz
►Lenses: Samyang CineLens VDSLR MK2 kit: geni.us/nUoaK
►External monitor: ATOMOS SHINOBI: geni.us/IFGQ25k
►Storage: AngelBird Match Pack Blackmagic PCC 6K PRO: geni.us/0bQA
►Lighting System: NANLITE FS-150: geni.us/09WC3A
►Softboxes: NANLITE SB-PR-90-Q: geni.us/UT0RA
►RGB Tubes: NANLITE PavoTube II 6C: geni.us/HHd76
Music by Epidemic Sounds:
►Lofive - Yhello
*************************************************************************************
BUY ME A COFFEE ☕☕
If you think I need more energy, you can show your support by buying me a coffee! Supporters get a shoutout in the next video! No subscription or sign-up required!
►LINK: www.buymeacoff...
*************************************************************************************
NOTICE: Amazon links provided are linked to my Amazon Affiliate account and support the channel at no extra cost to you.
#antec #nx500margb #budgetpccase

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@mattscomp Год назад

First. Decent Antec case. I wish it had two USB 3.0 ports. Honestly we are past half way in 2023 no one even needs front USB 2.0 ports anymore surely. Great content as always.

@PCCrazyDario Год назад

USB 2.0 for wireless mouse, keyboards or headset, USB 3.0 for USB Flash Drives and on front you have USB C as well which I forgot to mention. :(

@LobotimirMerkanski 7 месяцев назад

USB 2.0 are very useful. There are Bluetooth adapters that play better with them.I'm sure there are other cases as well where 3.0 doesn't cut it.

@mattscomp Год назад

Rubber grommets are mostly unnecessary I feel. A lot of them just fall apart after a few years anyway. Leaving black rubber fragments floating around in your system. I do like the red theme of this build. ❤

@PCCrazyDario Год назад

Totally agree. Only one manufacturer makes them perfect and they don't fall out. :)

@ikiboisart Год назад

Like the case, this is perfect for full atx or matx compact builds, I find other cases to long and to much unused space from the front going to the motherboard since nowadays a lot of people put aio on top of the case.

@PCCrazyDario Год назад

Supports mATX or ITX boards. I just mention ATX in the video since it has loads of space abivr and below mATX board but that is good for cable management.

@ikiboisart Год назад

@@PCCrazyDario Yeah I thought so too thanks for highlighting it, I also noticed a small usb type C on the front panel which is a really good plus for me.

@PCCrazyDario Год назад

@@ikiboisart Yeah, I totally forgot to mention it. My bad. But cool idea for the USB Type C.

@josephjoestar4043 3 месяца назад

How could you fit a 7900 xt sapphire pulse (31.3 cm) in that case if the maximum GPU size for that case is 30cm with front fan ?

@justeddm Год назад

Now i have hope, antec is about to release 540 constellation matx case

@PCCrazyDario Год назад

Soon... :) I will definitely do a review on it. :)

@DeathStriker88 Год назад

Hello. I have some doubts to ask. 1. Is it possible to do an aio build inside Antec Striker Mini? 2. Is it possible to do an air cooler build inside Antec Striker Mini? 3. How many fans can be installed inside Antec Striker Mini and of what size? 4. Is there enough space to house a full sized RX 7900XTX or are there any SFX graphics card too?

@PCCrazyDario Год назад

Hi... Let's go with the numbers: 1. Apparently yes. On the back side of the motherboard you install the radiator and then just flip the tubes on the other side. Radiator tubes need to be placed on top. 2. Yes, but it has to lower profile. It's designed for water cooling. Otherwise, remove the TG unfortunately. 3. Front and rear 2x 120mm and on the back side of the motherboard, 2x 120mm 4. Maximum length is 330mm, but the thickness is somethign else. I think a normal 2 slot GPU will fit. Anything thicker than that is a no no. :/

@DeathStriker88 Год назад

@@PCCrazyDario thanks

@PCCrazyDario Год назад

@@DeathStriker88 Always welcome bro!

@susmoybasak2971 Год назад

Can I fit three 3.5 inch hdd in this case?

@merosi1234 Год назад

Hi, is the lights color changeable?

@PCCrazyDario 11 месяцев назад

I am 100% sure you can change the colors with the button on the case, but I can't remember if the fans have a 3-pin 5V ARGB cable to connect it to the motherboard and control via motherboard software.

@markhovscrch4050 Год назад

I decided to buy a PC by building it, this NX501M model + PSU 550 Watts the main problem for me was installing a Fan because I lack muscles to open the front case. Can you teach us how to properly open the front panel and instead of using 120mm Fan Screw but use Anti vibration rubbers.

@MrMilli 8 месяцев назад

Antec keeps making cases that don't allow fan control. Just weird. I don't believe that such a thing would adds cost.

@PlayerSlayer766 8 месяцев назад

does the rgb header need to be plugged in for the rgb to work? just asking because my motherboard doesn't have an rgb header.

@kale120903 7 месяцев назад

I own an antec df600 and not this one. I believe you can connect the reset switch to the rgb controller to control the rgb because they did it in my df600

@bigblack2295 5 месяцев назад

It's M-Atx form but has the same dimensions with a regular ATX case. This is bs. I prefer a regular Atx case with 6 heatpipe cpu cooler rather than water cooler but have extra pcie slots. Choosing M-Atx but having the same dimensions with ATX case is not logic.