ANTEC Performance 1 Review - A Good All Round Case

Подписаться 218 тыс.

Просмотров 15 тыс.

50% 1

With airflow in mind, the Performance 1 fom Antec is your more affordable chassis with some nice little features including built in temp display and functional rear cable management covers. Join us as we dive in and check out everything you need to know about this case.
Stay tuned for the time-lapse build coming soon.
Learn more @ bit.ly/3nkT0C6
Get yours @
Amazon - amzn.to/3Kc8398
Newegg - www.newegg.com/p/N82E16811129292
00:00 - Intro
00:32 - Aesethics
01:15 - Dimensions and case layout
01:38 - Side panels, front IO, temp display
02:36 - Around the back
03:15 - PSU, Storage and Air flow
04:04 - Inside the Performance 1
04:49 - Clearances
05:04 - Fan and radiator locations
06:55 - THE BUILD!
08:05 - Parts that needed following up (iUnity software, rear cable management )
10:31 - Why no 420 rad was tested?
11:28 - Res support
12:16 - Vertical GPU support
13:09 - About the white version
13:41 - Price
14:41 - About the build and outro
►Build Specs - Amazon US Store - amzn.to/2JzK5YN
Antec Performance 1 - amzn.to/3zzoYh6
ASUS ROG Strix B650E-F - amzn.to/3mev1nV
AMD Ryzen 7900X3D - amzn.to/3mh1xFY
AMD Radeon RX 7900 XTX - amzn.to/40Xf2cA
Team Group Delta DDR5 32GB 6400Mhz - amzn.to/436fMy8
Team Group 1TB Z44L x2 - amzn.to/3m2nUzb
Antec Signature 1000W - amzn.to/3ZK9QrR
Antec RGB Fusion Fans - amzn.to/3ZGDWMQ
CableMod Pro Sleeved Cables - amzn.to/31ZJ3ja
►Watercooling
Bitspower Summit M Pro CPU Water Block, Crystal (AMD Version) - amzn.to/3mevfLN
Bitspower 7900 XTX Reference Block -
Bitspower Leviathan II 360 SF Radiator with Quad G1/4" Ports (40mm Thickness) - amzn.to/3m9jarj
Bitspower Hercules 150mm Reservoir Combo Digital RGB - amzn.to/3GlhJgu
Bitspower G1/4" Male to Female Extender Fitting, 90 Degree Rotary, Matte Black, 4-Pack - amzn.to/3Ucz8xl
Bitspower BP-MB90R2 - G 1/4" Matte Black Dual Rotary 90 Degree IG 1/4" Adapter - amzn.to/3U8bRgd
Bitspower G1/4" Rotary Offset Fitting, 5mm, Glorious Black, 2-Pack - amzn.to/3KvPLAZ
Bitspower G1/4" to Enhance Multi-Link Fitting for 16mm OD Rigid Tubing, Matte Black, 6-Pack - amzn.to/3Mhwrsw
Bitspower None Chamfer PETG Link Tube, 16mm OD, 500mm, Clear, 4-pack - amzn.to/3mevOVV
►My Camera Gear
Sony A7SIII - amzn.to/3LIrbvT
Sigma 24-70mm f/2.8 DG DN - amzn.to/3CeCLMc
Manfrotto MK290XT - amzn.to/3nMNVmm
Manfrotto MVH502AH Pro Video Head - amzn.to/3Gj1Erw
Edelkrone SliderOne V2 - amzn.to/3m32Zfj
Edelkrone HeadPlus - amzn.to/3zxgh6C
Edelkron JibONE - amzn.to/3zyYuMx
Rode NT3 - amzn.to/3KdbZXh
Rode Lavalier - amzn.to/3zAacqg
Rode Rodelink Newsshooter - amzn.to/3nOPOPB
MindShift Gear FirstLight 30L - amzn.to/3zBaahI
Follow us -
Facebook - / ggflanparty
Instagram - / ggfevents
Builds.gg - builds.gg/users/stuart_ggf-5
#ANTEC #PERFORMANCE1 #GGFBuild

Наука

Опубликовано:

4 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@birdsoup777 5 месяцев назад

Went from Lian Li 0111 dynamic xl (not the evo) to this case. Antec P1 is well made. I love it. Fits my 4090 ROG Strix without side panel touching the 12vhwpr cable, unlike the lian li. Kept stock 3 Front 140 and 120mm rear, added 3 x 120 bottom for gpu. similar fan config as Lian Li,. Same temps idle and load. Lian Li is great, got sick of the side panel access, loose slotting of panels, and aquarium look. Antec panels buttons up tight and independently removable, good balance of conservative and gaming appearance. At first did not like the look but when you see it, it will grow on you.

@AlphaMachina Год назад

Actually looks like a really solid case.

@swizzler8053 Год назад

Just received it. Its amazing. It doesnt feel like a full tower.

@michaellovejoy5299 Год назад

Can’t wait to see what you build in this case!

@sumin889 Год назад

This is nice case. Love it. I need to order 1 for myself. Thank you awesome review and build.

@robertmajors1737 Год назад

Can't wait to see your custom loop build in this case. It seems almost perfect for that purpose.

@darkchillz_1713 Год назад

I like the grill design for the front panel...looks sleek and aggressive.

@birdsoup777 5 месяцев назад

Thank you. Your reviews always give me the information no other reviewer does

@GGFEvents 5 месяцев назад

Thank you, glad I can help!

@wrathofgrothendieck 3 месяца назад

The greatest case ever conceived

@Alexlin1124 Год назад

Hi Stuart, another great build as usual. The dual 360 radiators with 60 mm thickness show how roomy it is. Nice case and video.

@hoyle038 Год назад

I see you ANTEC. They sure have come a long ways.

@Ryden24 9 месяцев назад

Great video just subbed

@williammathies2998 8 месяцев назад

Thanks!

@dillardc81 Год назад

Got this case for myself about a month ago. It's great.

@swizzler8053 Год назад

Received it today and i totally agree. Its so compact for a full tower.

@GSP-76 10 месяцев назад

@@swizzler8053if two 360mm rads are used on top and front, can a 360mm distro plate be utilized on the side?

@sidha22 17 дней назад

Can you add 3.5 caddy on back in place of 2.5 ? Will the back cover close if I do that ? Thanks in advance

@dillardc81 17 дней назад

@@sidha22It doesn't look like there would be room. You might be able to mount one on the bottom of the case somewhere. Plenty of room above the PSU shroud.

@dillardc81 17 дней назад

@@sidha22I just have a USB C caddy sitting on top of the case for hard drives

@yunescs Год назад

Hi guy , that colours are very beautyful , but i need know how have frontal filter in red if is posible . 🤔. Salut & regards.

@BlakeBlaKe88 Год назад

When will you realease the new build in the white lian li v3000+ ?

@IcarusTECH 9 месяцев назад

I'm glad Antec skipped the the RGB!

@michaellovejoy5299 Год назад

With three fans installed on the outside and a 27mm thick radiator would a push pull with six total fans be possible and if so how much would it improve cooling performance?

@forestR1 Год назад

There's a lot of youtubers that I used to watch for things like deep dives into cases, but over the last year or 2; you've replaced them all. They've become bored having millions of subscribers and give little more than "they sent me this case and you could probably do "x" with it. the end (*cough Jay)" Meanwhile you are going into incredible detail (enough that a balls out custom loop could be 95% safely planned just from watching your video) and then including some of highest quality builds out there, just as a demo.

@GGFEvents Год назад

Thank you for the kind words

@thegoodsherman 9 месяцев назад

The Motherboard from you Looked a little bit different to the Amazon..where did you get the Cover for the Connections.. Best regards ✌️

@Walko762 10 месяцев назад

Hi, I know the spec sheet gives room for a 360 at the top of the case, however it looks like it is possible to fit a 420 could you confirm ?

@jmm1212 Год назад

What was the red mesh you put in the front of the case?

@DrDAC-go7hs 9 месяцев назад

He said he painted the mesh red

@bits2646 Год назад

Is that pc for sale? P.S: What SATA cables youre using on this build?

@benjaminnyman8687 Год назад

Since this is called FT for full tower, will there be an MT version that is more mid-tower sized?

@michaellovejoy5299 Год назад

I sure hope so because they have a winner. I want a Micro ATX version.

@HardwareFRA Год назад

Amazing video ! A lot of affiliate links in the description (camera gear) are broken, plz fix them :D

@Leon-Belmont Год назад

Any news in the white version 😢?

@Justmakesomenoiz Год назад

Fuck me sideways this is so gorgeous. I really want this case such a great design but of course it's not avabile in Sweden.

@WJK2397 Год назад

Well I don't care about rgb so it's ok for me. Thanks for the review.

@rodhester2166 Год назад

great clean build, I did notice the mirror and colored screen right away. Great catch on the button position. Wondering if you have a degree in Industrial Design. I do and I think that is why I catch a lot of details in your builds and product design in general. cheers.. hope you are liking living in the states.

@amityone1 Год назад

👍🏻

@FcryCola Год назад

Loved my Antec 1200, now i dont know what i think about this brand

@PorckChop-mk3pw 9 месяцев назад

Wouldn't the paint over those tiny holes block the airflow

@GGFEvents 9 месяцев назад

Lol what

@PorckChop-mk3pw 9 месяцев назад

@@GGFEvents eg. Paint getting stuck inside the holes when you're spray painting it

@PorckChop-mk3pw 9 месяцев назад

I've never painted a case before so idk how it works exactly but I'm willing to learn if I'm wrong

@konepolska Год назад

They need to make Performance 1 XL edition so i can fit at least 2 420's AIO.

@maxsunz3703 Год назад

It's like lancool iii

@jlgroovetek Год назад

"This is a nice little gaming rig"... 7900X3D + 7900XTX, maxed out customer water-cooled system. Haha.

@Sossingro Год назад

Remember when Antec was pretty much on top of the case market? Felt like only the Coolermaster Cosmos cases were better. Then they just fell off a cliff with bad products

@Dexx1s Год назад

So this is the same price as the Phanteks G500a, which comes with 3 ARGB fans, and is pretty much the same same save for the temp screen. The G500a is $30 less if you get the one without fans. For watercooling, you're not looking at the CPU and GPU temps much anyway. And Phanteks is a more well known brand already. I'm not sure who this case is really targeting.

@MarshallFlores Год назад

There are a few differences, including the Antec supporting up to 3x 120mm fans in the PSU shroud. Aesthetically the Antec is more my taste as well, with no PSU shroud cutout (which I kinda dislike), and grommets instead of those sliding door covers for cable management holes.

@Alexlin1124 Год назад

Not only temp display, removable top bracket for easy building, better performance fans, much bigger bottom filter and gpu airflow, 8 x PCI expansion... There are many features better than g500a.

@Dexx1s Год назад

@@MarshallFlores Those fans on the shroud do pretty much nothing given that it's not really pulling air from outside of the case. It's being blocked by the PSU, cables and the drive cage. If they'd copied the Lancool 3 it would actually make sense. Everything else there is aesthetics and the G500A's aesthetics easily wins. It comes with 3 ARGB fans and the LED strips from the get go. So this case appeals to like 100 people. Still not seeing why they'd invest in making this case.

@Dexx1s Год назад

@@Alexlin1124 Having 8 slots isn't by any means a "better feature". Just about nothing is getting to that bottom slot. If you're going to reach that hard, you're not going to win. The G500 has a drain port, comes with an anti-sag bracket, has three dedicated slots for vertical GPU mounting and comes with the vertical mount. All you need is the riser. The G500A also has the hold right below the GPU so they don't have to wrap all the way back under the fans of the GPU. Oh and the front bracket of the G500A comes off. The bottom filter doesn't matter that much when most of it is blocked by cables and the drive tray. That 2 degree temp drop isn't really wroth the two extra fans. And adding three is asinine given that it would be right above the PSU, which takes up at least a fan's size of that space at the bottom. I can really just buy the fanless G500A then add in my own fans if you're really actually looking for performance. Hell, I can buy a 5 pack of P14 fans for #0 This case doesn't really have much appeal other than maybe the aesthetic of the front, which is pretty close to the North. The display at the top is all it really has, and most would just add an LCD to a different case, and get more info.

@Alexlin1124 Год назад

8 x pci expansion means more distance between PSU shroud and GPU, you could install fans on shroud to blow your GPU. The bottom side is full-size air inlet , if you require better storage speed and no need in 3.5” hdd. The fans on shroud will be very useful to GPU. That's a BIG difference with G500a.