Тёмный

Antique Scale Restoration - Laser Engraving, Bluing, Sandblasting 

Forgotten Shine Restoration
Подписаться 548 тыс.
Просмотров 140 тыс.
50% 1

In this video, I take you through the complete restoration of a beautiful antique kitchen scale. This old scale was in a rough state, but with careful attention and the right techniques, I've brought it back to life.
The restoration process begins with a thorough disassembly of the scale to clean and restore each part individually. I first check if the original paint contains lead-it thankfully does not. The brass components are soaked in a mixture of flour, vinegar, and salt to gently remove dirt and tarnish. The other parts are sandblasted to eliminate rust and grime.
Once all the pieces are cleaned, it’s time for painting. The large parts are sprayed with fresh paint, while the smaller internal components are blued to protect against corrosion. Since the original scale plate was missing, I created a new one from aluminum. The numbers on the scale are engraved using precise laser engraving, giving the scale a stunning, authentic look.
Finally, I add green decorative details to the freshly white-painted scale, completing the restoration. The highlight of this project is undoubtedly the new scale plate brought to life by the laser engraving.
Watch the video to see this antique kitchen scale transform from a neglected relic into a sparkling gem! If you enjoy restoration projects like this, don’t forget to subscribe to the channel and give the video a thumbs up.
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do this here:
/ @forgottenshinerestora...
Do you like what you saw and want to help the channel develop further? If you want to support me, you can donate via Paypal:
www.paypal.com...
or use the following affiliate links:
Material to work with:
Metabo bench grinder: amzn.to/46rrkxL
Metabo cordless screwdriver BS 18 LTX-3 BL: amzn.to/43833JV
Metabo bit set: amzn.to/3pzwV4n
Metabo bench grinder: amzn.to/46rrkxL Metabo cordless screwdriver BS 18 LTX-3 BL: amzn.to/43833JV Metabo bit set: amzn.to/3pzwV4n Metabo Orbital sander: amzn.to/3z1VGuj Bluing Equipment: amzn.to/4bXftJT Center drill: amzn.to/45o3bYA Two-component adhesive: amzn.to/3z319kJ
Equipment:
Camera Sony AX-53 amzn.to/3XHqI2J
Ring light amzn.to/3rhgj1Q
Microphone Rode amzn.to/44vlFF1
DJI Gimbal Camera amzn.to/3O1YjkJ
Affiliate links cost you nothing, I only receive a small share from the seller, you have no disadvantage.
▶ Did you like it? ◀
Did you like the video? Then like, subscribe and share, please!
Thank you!

Опубликовано:

 

9 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 192   
@donparker1823
@donparker1823 22 дня назад
Very satisfying to watch this transformation.
@ForgottenShineRestoration
@ForgottenShineRestoration 21 день назад
Thank you! 🐢
@stressedoutsephalopod
@stressedoutsephalopod Месяц назад
babe wakeup new forgotten shine restoration video dropped
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
🤣🤣👍🐢
@geddyzenorseman7476
@geddyzenorseman7476 29 дней назад
Great restoration! The sound from that extraction system you have for the paint sounds like you're either down in the Mariana Trench, or in space lmfao.
@ForgottenShineRestoration
@ForgottenShineRestoration 29 дней назад
😅👍🐢
@reuben9213
@reuben9213 27 дней назад
Really enjoyed watching this restoration . Excellent craftsmanship !
@ForgottenShineRestoration
@ForgottenShineRestoration 26 дней назад
Thank you very much! 🐢
@Restorers.everything
@Restorers.everything 5 дней назад
great work
@nineteenandfortyone
@nineteenandfortyone 26 дней назад
Great restoration! It's always impressive to see scrap iron turned back into a useful and attractive instrument.
@ForgottenShineRestoration
@ForgottenShineRestoration 25 дней назад
Thank you very much! 🐢
@mystikalese
@mystikalese Месяц назад
You could file off the sharp edges and rough spikes from casting.
@mixedtactics
@mixedtactics День назад
Great work.💯💯💯
@ForgottenShineRestoration
@ForgottenShineRestoration День назад
Thank you! 🐢
@michalledick8281
@michalledick8281 Месяц назад
Soo Happy to get to see another one of your videos, you do great work.
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thank you! 🐢
@peteoneill5799
@peteoneill5799 10 дней назад
A beautiful restoration but you should've payed a pro fine liner to do the paint
@feldhardschoenbern
@feldhardschoenbern Месяц назад
Das Laserdingens ist geiler Scheiß. Genau mein Dingens. Der Rest, wie immer, sensationell.
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Vielen Dank! Ja, der Laser macht schon richtig Spaß! 🐢
@liamvdw221
@liamvdw221 11 дней назад
Ich würde das Ding nie wieder zusammen bekommen...😂 tolle Arbeit !
@ForgottenShineRestoration
@ForgottenShineRestoration 10 дней назад
Ich habe auch meine Aufnahmen vom zerlegen vorher nochmal angeschaut 😅🐢
@sleeplesshead602
@sleeplesshead602 5 дней назад
Gut gemacht 👏
@ForgottenShineRestoration
@ForgottenShineRestoration 3 дня назад
Danke! 🐢
@romankache1611
@romankache1611 Месяц назад
Colles intro. Auch wieder eine einwandfreie Arbeit. 👍🏻
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Danke für das Lob! 🐢❤
@mundea
@mundea Месяц назад
some heck of an intro!
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thank you very much! I'm very happy that you like it! 🐢
@foxwhiskey
@foxwhiskey Месяц назад
I think I need a laser for my workshop, too. Also cause of the funny sound...😊😂😅
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
🤣👍 Thats true... 🐢
@sandrap.3399
@sandrap.3399 Месяц назад
wie immer ein Genuss, dir zuzusehen und zu -hören :-)
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Danke für das Lob!🐢
@CallMeTippy
@CallMeTippy 15 дней назад
Great job as always, this one looked like it was a doozy to put back together 😅.
@johnnylightning203
@johnnylightning203 25 дней назад
Great job! Next time you add paint highlights, use a sponge instead of a brush. You'll get neater lines and better coverage.
@ForgottenShineRestoration
@ForgottenShineRestoration 25 дней назад
thats a great tipp. Thank you! 🐢
@johnnylightning203
@johnnylightning203 25 дней назад
@@ForgottenShineRestoration You're very welcome!
@Jarrod-jb85
@Jarrod-jb85 Месяц назад
Truly superb! A work of art
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thank you! 🐢
@nicovandyk3856
@nicovandyk3856 20 дней назад
Love your cordless drill 😜 and the cool sandblast shots!
@ForgottenShineRestoration
@ForgottenShineRestoration 20 дней назад
Thank you!🐢
@user-xo2rd1rg2x
@user-xo2rd1rg2x День назад
kitchen scale - кухонные весы; чешуя - scale of fish.
@joshuadbybee4906
@joshuadbybee4906 Месяц назад
always amazed at your skill thank you for sharing.
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thank you for your nice comment, I'm very happy about that... 🐢❤
@crantzdorf5929
@crantzdorf5929 Месяц назад
The engraving sent it over the top, wonderful job!
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thank you very much! 🐢
@oneshotme
@oneshotme 24 дня назад
It looks great and you did a wonderful job restoring it as well!!!! I enjoyed your video so I gave it a Thumbs Up
@ForgottenShineRestoration
@ForgottenShineRestoration 23 дня назад
Thank you very much! Nice to read from you again. I recently discovered that you are my first traceable subscriber... ♥️🐢
@georgebrown8312
@georgebrown8312 Месяц назад
Marvelous restoration job. That scale looks a lot better than before. Excellent work.
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thank you so much for your great comment! 🐢
@PaintedskiesRankin
@PaintedskiesRankin Месяц назад
Unintentional ASMR love it
@ForgottenShineRestoration
@ForgottenShineRestoration 29 дней назад
It is a little bit intentional 😅🐢
@jlindskog5141
@jlindskog5141 Месяц назад
Super ! 🐢💚👏👏👏
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Danke! 🐢
@RestorationsNNT
@RestorationsNNT 10 дней назад
I Also Do Restoration Of Old Rusty Machinery. I See You Do Very Well
@MASI_forging
@MASI_forging 26 дней назад
Incredible work as always 👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration 26 дней назад
Thanks a lot! 🐢
@mdouglaswray
@mdouglaswray 26 дней назад
SO lovely!
@ForgottenShineRestoration
@ForgottenShineRestoration 26 дней назад
Thank you! 🐢
@user-oj3kf9xq2p
@user-oj3kf9xq2p 28 дней назад
really great job! 🍀🍀👌👌
@ForgottenShineRestoration
@ForgottenShineRestoration 28 дней назад
Thanks a lot! 🐢👍
@tanyaligovo929
@tanyaligovo929 Месяц назад
Всегда восхищаюсь вашими работами! Я занимаюсь ремонтом и немного реставрацией одежды, и люблю смотреть работу других мастеров.❤
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Спасибо! Вы тоже сами снимаете видео? 🐢
@tanyaligovo929
@tanyaligovo929 Месяц назад
@@ForgottenShineRestoration работу не снимаю, только своих собачек, для души. 😊
@user-le6rf9nu4i
@user-le6rf9nu4i 20 дней назад
Отличная работа!
@ForgottenShineRestoration
@ForgottenShineRestoration 20 дней назад
Спасибо!🐢
@subterror2274
@subterror2274 Месяц назад
The unintentional overblowing of the mic is really funny
@pascalrichard2902
@pascalrichard2902 Месяц назад
ha enfin quelqu'un qui sait ce servir d'une lime pour faire les arrondis. Super boulot, Merci
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Merci! Sinon, cela n’a presque aucun sens, non ?! 😅🐢
@mrimmortal1579
@mrimmortal1579 29 дней назад
The earplug-in-the-hole trick is a tip I’ve given on so many of these restoration channels that I don’t remember who all I’ve told it to. If you heard it from me, I’m glad you’ve found it useful. If you _didn’t_ hear it from me… well, I’m *STILL* glad you’ve found it useful! Good restoration! The laser etched faceplate turned out very nice!
@ForgottenShineRestoration
@ForgottenShineRestoration 29 дней назад
Unfortunately, I don't remember who gave me the tip. But I'm glad to know the tip...🐢
@lightofthemoon5197
@lightofthemoon5197 Месяц назад
Чувак, весы - это точный измерительный инструмент. В данном случае никакая реставрация не вернёт их к полноценной функциональности! После реставрации они лишь выглядят как новые, но годятся лишь как декоративные, для музея.
@pascaldespinois9722
@pascaldespinois9722 27 дней назад
Formidable restauration !!! Bravo !!! 👍👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration 26 дней назад
Merci 🐢
@CofeMix
@CofeMix Месяц назад
So cool💪👍
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thanks! 🐢
@user-dz8dg6ey8g
@user-dz8dg6ey8g Месяц назад
Класный видос, браво мастер. Лайкаю.
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Спасибо! 🐢
@Glance0008
@Glance0008 29 дней назад
That spooky fog and eerie noises was so over the top and I LOVED it. Wunderbar!
@ForgottenShineRestoration
@ForgottenShineRestoration 29 дней назад
Thank you 😅🐢
@Oelwannski
@Oelwannski Месяц назад
Die Kreuzschlitzschrauben verderben das Gesamtbild.
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Ja, leider wurden mir die falschen Schrauben geschickt und die Zeit war knapp. Geplant waren Schlitzschrauben... 🐢
@suuris1
@suuris1 16 дней назад
Wow!!!
@sultanabella242
@sultanabella242 25 дней назад
Excelente
@ForgottenShineRestoration
@ForgottenShineRestoration 25 дней назад
Thank you! 🐢
@amirheydari2871
@amirheydari2871 28 дней назад
Very nice
@ForgottenShineRestoration
@ForgottenShineRestoration 28 дней назад
Thanks! 🐢
@Phantombrother
@Phantombrother 17 дней назад
Wait . . . you painted it in green, but at the end the detail was all grey. Trick of the light, or did you repaint?
@ForgottenShineRestoration
@ForgottenShineRestoration 16 дней назад
No, it's still green. you can actually see it worse due to the lighting..🐢
@it12mv
@it12mv 22 дня назад
لماذا لم تنشر لحد الان
@Capturing-Memories
@Capturing-Memories 22 дня назад
What software did you use to make the template?
@ForgottenShineRestoration
@ForgottenShineRestoration 22 дня назад
Inkscape... 🐢
@TheSockMonkeyGuy
@TheSockMonkeyGuy 28 дней назад
This is restoration on a scale never seen before!! 😉 ❤😍
@ForgottenShineRestoration
@ForgottenShineRestoration 28 дней назад
Thank you very much! 🤩🐢
@batterymakermarkii2654
@batterymakermarkii2654 Месяц назад
That laser engraved dial is the centerpiece of that restoration.
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thats true... 🐢
@stevenbrown8857
@stevenbrown8857 Месяц назад
That's superb, I love the white and great paint finish 😊
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thanks! 🐢
@MrFixiit
@MrFixiit 26 дней назад
Nice job , shouldnt the tip of the needle have been red ?
@ForgottenShineRestoration
@ForgottenShineRestoration 26 дней назад
Good idea, I'm just not sure if the original is red?!🐢
@user-sp8xk3yo7z
@user-sp8xk3yo7z 27 дней назад
Parabéns Excellent Good job
@ForgottenShineRestoration
@ForgottenShineRestoration 27 дней назад
Thank you very much! 🐢
@kandarthecougar
@kandarthecougar Месяц назад
Great job 👍
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thanks! 🐢
@MHSDankusPotatus
@MHSDankusPotatus Месяц назад
Loudest restoration channel I've come across. I love it!
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
😅🐢
@Blaze_1961
@Blaze_1961 16 дней назад
Keep practicing the pin striping and use the proper brushes. It is a long hard craft to master.
@joachimkratzsch4394
@joachimkratzsch4394 Месяц назад
Eine absolut gelungene Restaurierung mit einem Superergebnis. Tolle Arbeit , mit viel Gedult und Wissen durchgeführt👌👍👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Vielen lieben Dank für dein ganz tolles Feedback! Liebe Grüße 🐢
@user-uf4it7fu5r
@user-uf4it7fu5r 28 дней назад
Очень круто . Класс !!!
@ForgottenShineRestoration
@ForgottenShineRestoration 28 дней назад
Спасибо!🐢
@iraqisonic9920
@iraqisonic9920 25 дней назад
أنا مشترك جديد⁦✌️⁩⁦🇮🇶⁩⁦✌️⁩
@ForgottenShineRestoration
@ForgottenShineRestoration 25 дней назад
شكرا جزيلا ومرحبا بكم!🐢
@garymucher4082
@garymucher4082 Месяц назад
Very nice refurbishing of such an old rusty scale. Even with your iffy painting efforts (your alluding to) it still has such a regal look to the finished product. I say you made it look great... Thumbs Up!
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thank you very much! 😅👍🐢
@jenniferhart559
@jenniferhart559 Месяц назад
Great job on the restoration! A trick I saw for fine detail painting is to use a toothpick instead of a brush (if you don't have a tiny brush).
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Oh, that's a good idea, I've done that before in another restoration. apparently I forgot this trick 😅🐢
@pazzy4501
@pazzy4501 26 дней назад
Well done, what is the name of the software you used ?!
@ForgottenShineRestoration
@ForgottenShineRestoration 25 дней назад
Thank you! Davinci resolve...🐢
@Izidiify
@Izidiify 29 дней назад
Awesome restoration! Precision masking tape might help with the painting as it's meant to be flexible enough to go around the corners while still giving you a crisp line.
@ForgottenShineRestoration
@ForgottenShineRestoration 29 дней назад
oh yes, thats a good idea, thank you! 🐢
@RetiredEE
@RetiredEE Месяц назад
Nicely done! Did you coat the laser engraved scale with a clear lacquer? Also, would the depth of the laser engraving permit adding color to the scale?
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thanks, no I didn't put any varnish on it. Since the surface was already rough, I didn't dare put powder on it, otherwise everything might be colored and I didn't want that... 🐢
@furkancan41
@furkancan41 Месяц назад
Perfect. Hi from Turkey.. Best regards..
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thanks! Greetings to Turkey! 🐢
@robinblackmoor8732
@robinblackmoor8732 13 дней назад
Yeah, but would the painting have been perfect on an original unit? Probably not, so you made it look authentic. Painting freehand is not easy. Take it from a model builder. it takes quite a while and a lot of practice to get really good.
@ForgottenShineRestoration
@ForgottenShineRestoration 13 дней назад
Thank you for your kind words! 🐢
@user-vd8gu3uy6t
@user-vd8gu3uy6t 29 дней назад
Nice👍🏻
@ForgottenShineRestoration
@ForgottenShineRestoration 29 дней назад
Thanks! 🐢
@gregophall9004
@gregophall9004 Месяц назад
Replace the Phillips head screws with regular slotted head screws to be periodically correct.
@gregophall9004
@gregophall9004 Месяц назад
Period correct
@MENDlGAO
@MENDlGAO Месяц назад
Great job 🇧🇷🫶
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thank you so much! 🐢
@andrzejporeda7281
@andrzejporeda7281 29 дней назад
Super jest ta waga odrestaurowana Pozdrawiam serdecznie. 👍👍👍👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration 28 дней назад
Dziękuję! 🐢
@Restorationsystem
@Restorationsystem 26 дней назад
Nic ❤❤❤
@ForgottenShineRestoration
@ForgottenShineRestoration 25 дней назад
Thanks! 🐢
@blasperezybarra8737
@blasperezybarra8737 14 дней назад
Very good restauration,bad color,is green not grey
@jamesfield5346
@jamesfield5346 Месяц назад
Is it equal parts of each for the flour, vinegar and salt mix? No matter how much or how little you want to make. Correct?
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Exactly, you put the same amount of everything in 🐢
@jamesfield5346
@jamesfield5346 Месяц назад
@@ForgottenShineRestoration awesome, thanks
@HasanYildiz-fc8rb
@HasanYildiz-fc8rb 29 дней назад
Bravo
@ForgottenShineRestoration
@ForgottenShineRestoration 29 дней назад
Thanks! 🐢
@vinceianni4026
@vinceianni4026 Месяц назад
Hello mister beautiful restoration beautifully restored well done
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Hello... 🐢
@kelcesar
@kelcesar Месяц назад
I loved the intro! On the other hand, the machines sounds were too loud and harsh. In older videos they were a little dampened more pleasant. All in all, another beautiful restoration!❤
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Thank you for your feedback! I'm working on reworking the sound, something seems to have broken, I noticed myself that something was wrong. It should be fixed in the next video...🐢
@jordanbarone9094
@jordanbarone9094 Месяц назад
The audio gain on this vid is oddly amazing😂
@modellbahnagenda
@modellbahnagenda Месяц назад
Großes Kompliment 👍👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Vielen lieben Dank! 🐢
@donovanarredondo2293
@donovanarredondo2293 Месяц назад
Do you offer this as a service? I have an old relaoding press from my grandma id love to have cleaned up. Though its no where near as in bad shape as this stuff haha
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
No, this is just my hobby😅🐢
@donovanarredondo2293
@donovanarredondo2293 Месяц назад
@@ForgottenShineRestoration damn, was worth a shot
@michaelbartels1149
@michaelbartels1149 Месяц назад
Sehr gute Arbeit. Wo bekommst Du nur immer die alten Sachen her?
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Vielen Dank! Die meisten Sachen beziehe ich über Ebay oder Kleinanzeigen... 🐢♥️
@janainafernanda32
@janainafernanda32 28 дней назад
Que delícia vídeo seu❤. Amo demais uma oena que já assisti todos. Por mim queria vídeo seu novo todos dias🤩🇧🇷
@ForgottenShineRestoration
@ForgottenShineRestoration 28 дней назад
Muito obrigado! Estou sempre ansioso por seus comentários. Que bom que você é um espectador tão fiel 🐢♥️
@otmshank4778
@otmshank4778 21 день назад
Na, wenn das keine deutsche Qualitätsarbeit ist, dann weiß ich och net. Kann man nicht meckern.
@user-rw2mm5np2u
@user-rw2mm5np2u Месяц назад
Что делать если будет свинец?
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Я бы тогда снял краску средством для снятия краски, иначе при пескоструйной очистке она бы попала в легкие...🐢
@user-rw2mm5np2u
@user-rw2mm5np2u Месяц назад
@@ForgottenShineRestoration Спасибо!
@grayukuk
@grayukuk 28 дней назад
It was good until you hand painted it!!
@ForgottenShineRestoration
@ForgottenShineRestoration 28 дней назад
🙈🙈🙈🐢
@martinseguidefez2343
@martinseguidefez2343 Месяц назад
¡"Escalas", no, balanzas!
@user-dy2xu7vj5g
@user-dy2xu7vj5g Месяц назад
Обратно я не собрал бы. Лайкос
@piparalegal2019
@piparalegal2019 Месяц назад
While I normally love your restoration videos, this is the first time I've nearly turned one off before finishing it. The "shaky cam" segments made me feel sick to my stomach because I get motion sick really easily. All in all, this was a great restoration, but please avoid the shaky camera!
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
ok, thank you for your feedback! 🐢
@tormozzzful
@tormozzzful Месяц назад
Вопрос лишь на кой здесь нужна соль? Уксуса и муки достаточно
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Соль немного ускоряет процесс.🐢
@geoffreygoldberg448
@geoffreygoldberg448 Месяц назад
You did such a nice job, but you have the kg - lb conversion wrong. 1 Kg = 2.205 lbs. So, your lbs scale is off by about 10%. 😢
@ForgottenShineRestoration
@ForgottenShineRestoration 29 дней назад
No, unfortunately you are wrong, it is German pounds and 2 German pounds are exactly 1 kilogram 🐢
@LRichardDude
@LRichardDude 28 дней назад
Why did that red turtle have a face on it? 😂😂
@whiteknightcat
@whiteknightcat 28 дней назад
Because a turtle without a face would have looked creepy and unsettling.
@ForgottenShineRestoration
@ForgottenShineRestoration 28 дней назад
🤣🤣🤣👍🐢♥️
@exilibrius
@exilibrius Месяц назад
🐢💪
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
🐢♥️
@nancyblanchard7218
@nancyblanchard7218 4 дня назад
you never field it..
@alialsaeed7755
@alialsaeed7755 Месяц назад
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
🐢❤👑
@atmadsen
@atmadsen 19 дней назад
Needs mor compression hahaha
@GummyBearWA
@GummyBearWA Месяц назад
Unfortunately, we couldn't see the green accent color because the lighting was bad.
@RedwoodRhiadra
@RedwoodRhiadra Месяц назад
Your pounds scale is about 10% off (a kilo is 2.2 pounds, not 2.0)
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Unfortunately, you are wrong. The German pound, that means 1 kiko is exactly 2 pounds🐢
@axelackens2157
@axelackens2157 Месяц назад
Die feinen Lackarbeiten gehen besser mit einem kleinen Stück Küchenschwamm.
@ForgottenShineRestoration
@ForgottenShineRestoration Месяц назад
Ah, das ist ein guter Tipp. Aus meiner Familie erhielt ich ebenfalls einen tipp, eine schaumstoffrolle zu benutzen und nur leicht aufzudrücken...🐢
@mikemakuh5319
@mikemakuh5319 5 дней назад
I wish you "restorer yahoos" would drop the melodramatics and just do the job with SOME explanation!
@ForgottenShineRestoration
@ForgottenShineRestoration 3 дня назад
What you do not understand? 🐢
@mikemakuh5319
@mikemakuh5319 3 дня назад
@@ForgottenShineRestoration I am not commenting on any lack of understanding. It seems that there is a trend towards this "silent drama" approach,,,,,,,,,,wait, Is this another Gootube AI video?
@The_Thinker_00
@The_Thinker_00 28 дней назад
Is it me or the audio sounds bad?
Далее
АХХАХАХАХАХАХАХАХ
00:16
Просмотров 170 тыс.
TRANSFORMATION - Turning $1 Car Into $2000 Car
24:02
Просмотров 795 тыс.
Antique wooden suitcase restoration.
23:05
Просмотров 145 тыс.
Candy Cigar Roller Restoration | And Testing
34:23
Просмотров 1,1 млн
1959 Philips Futurit | Old Radio Restoration
38:49
Просмотров 127 тыс.
C Programming Tutorial for Beginners
3:46:13
Просмотров 12 млн
АХХАХАХАХАХАХАХАХ
00:16
Просмотров 170 тыс.