Anytone ATD878UVII Plus Analog and Digital APRS Setup and Demonstration

Подписаться 475

Просмотров 13 тыс.

50% 1

Anytone ATD878UVII Plus Analog and Digital APRS Setup and Demonstration
Please visit our amazon store simplyhamradi-20 to purchase this product:
Anytone ATD878UVII Plus
www.amazon.com...
=1789&creative=9325&creativeASIN=B08ZYXHZWW&linkCode=as2&tag
=simplyhamradi-20&linkId=a7779184bee54e68649ed82b0ccc2ea2
Please use our Bridgecomm link as it helps our channel out dearly for purchases
www.bridgecoms...
Consider supporting my channels on Patreon.com/SimplyHamRadio
there are three sponsorship levels to choose from, Thank You

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@wilsonruizv 2 года назад

This was a really good video. I just got started with DMR with the same radio. Love it. But there is so much information there, it is insane. Thank you.

@simplyhamradio8286 2 года назад

Thanks, I hope it wasnt too much, Im good on QRZ ~ AA1PR if I can answer any ?s you might have

@MichaelBuckley284 Год назад

A quick note for consideration for those of you looking to use AT options for tri band, especially if your dmr group requires expanded frequency range for the codeplug. The at options from my experience will flash an Anytone 878UVII image (not plus) and lose the ability to utilize APRS Analog Recieve. Just wanted to forewarn others this may be a possibility.

@simplyhamradio8286 Год назад

Cool, I have no interest in modding mine ever

@whenpigsfly3271 Год назад

I don't think you need to set up a special analog channel for APRS. All you need to do is set-up the Analog Transmission Frequency on the APRS set-up in the CPS. Turn your APRS on in the radio by selecting the Upload Type. Then select the trigger, PTT either Tx start or Tx end. Then, no matter what digital or analog channel you are on the beacon will go out. The digital APRS works the same way, except you have to set-up the digital report channel in the APRS section of the CPS.

@simplyhamradio8286 Год назад

how can it send an aprs signal via DMR (digital) ? the only way it can do that is if you are using TG310999 into your MMDVM set to what ever freq it might be so for analog aprs yes it has to be set