Aquarium model 8 - Make Aquarium Chiller cool for 100 liter fish tank - [Piece of Paper]

Подписаться 167 тыс.

Просмотров 416 тыс.

50% 1

How to make an Cubic 30 aquarium tank
• Aquarium model 6 - How...
How to make a led light aquarium
• Aquarium model 5 - How...
How to make Co2 for aquarium
• Aquarium model 4 - How...
How to make Filter outside the aquarium
• Aquarium model 3 - How...
How to make an aquarium tank
• Aquarium model 2 - How...
Make an aquarium with black glue
• Aquarium model 1 - How...
Make a water chiller for the aquarium at a cheap and simple cost
• Aquarium model 9 - Che...
3 Peltier - TEC12706 - 60w, with water radiator
Note that it is not a substitute for genuine water chiller (Chiller). Because manufacturers have created perfect products
This clip is just for entertainment and for hobbyists to craft craft items
Have a nice day
If you like my Clip, give me 1 Like and 1 Subscribe
If my Clip is not good, please help me by leaving a comment below
I will try to do better
Thanks You Very Much
In the next clips I will share different Aquarium models and Filtering system and how to do i. See more clips on aquariums below the description
12v DC-1020 Pump
3W
Hmax - 0.4-1.5m
Qmax 200L / h
XH-W1209 Temperature Sensor and Controller
P0: Hot or cool
P1: Temperature range of operation
P2: The maximum value is adjustable
P3: The smallest value is adjustable
P4: Adjust the error of temperature
P5: P6: ...
You can use larger capacity Chip-Peltier (12710, 12715, 12730 ...)
This cooler can cool small aquariums of less than 80 liters of water
Have a nice day
-- don't drink and drive --

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 438

@amirhosseinb4920 2 года назад

It was great DIY I saw . its work perfectly and I will use that in my planted tank . thank you for your best learning

@Rafilkis Месяц назад

Do you know if it releases aluminium in the water ?

@pieceofpaper924 13 дней назад

Yes my friend. It was just a little experiment. It was a request from a friend who wanted me to make a video to prove it. It really didn't work.

@seenakudel 4 года назад

So much knowledge that you give me about fish tank and accessories sir.. thank you so much!

@pieceofpaper924 4 года назад

Thank you very much Have a nice day My Friend

@ockietheron6916 3 года назад

Very good, thanks. I will use is for cooling the water of my 4 Tower hydroponic setup.

@mr702s 4 года назад

You shouldn't mix raw aluminum with aquatic life. Similiar effect can be achieve by applying thermoelectric cold side to side of sump filter tanks except thermo exchange will be much slower.

@erlwij 5 лет назад

Nice video, IMO this is better than the heatsink fan version with all the fan noise. Need to check if the water cooling for the hot side is sufficient though, otherwise it wont last. Thanks for sharing practical sample u had done. I will try this myself with some adjustment. Cheers.

@pieceofpaper924 5 лет назад

Yes Thank you very much If the hot face is well radiated, the cold side will be very cold The highest temperature of hot water I measured reached 45 degrees Thank you very much Wish you a happy day my friend

@Cyptech 5 лет назад

dude.... you applying thermal paste like nutella. thick layer of thermal paste make effect of isolating instead of transfering heat.. also your thermal paste is not effective, try using liquid metal or something bettter will improve efficiency

@pieceofpaper924 5 лет назад

Yes Thank you very much for sharing your thoughts with me I will do better in the next test Thank you very much Wish you a happy day my friend

@royan.jdm2 3 года назад

Can anyone mention any liquid metal paste brand? Pls

@Cyptech 3 года назад

@@royan.jdm2 thermal grizly or cool labotry

@rayb.1376 4 года назад

I'm researching using peltier devices for cooling a water reservoir of about 16 gallons. I doubt I'll use water as a heat sink but, who knows? It's still a great idea. Just wanted you to know that I appreciated the video and the parts list. You've given me inspiration and you've motivated me to try something similar.

@LilyNormand 4 года назад

Thanks for the video. Perfect! Have you tried to use the blue radiator with, instead of a water-pump ... an air-pump to get cold air ? I am curious to see if I can get the cold air from the Peltier module using a radiator with air-pump to build a small fridge. Do you think it might works ? Thanks!

@sonuhazra9026 4 года назад

Super video

@pieceofpaper924 4 года назад

Thank you very much Have a nice day My Friend

@MrOnlymoin1 4 года назад

simply awesome!

@pieceofpaper924 4 года назад

Thank you very much Have a nice day My Friend

@BC-uu6iz 5 лет назад

tks my hat is off to you Sir great work was working on a similar project with four modules! now I've seen you showing the project made me feel great with similar idea tks again

@pieceofpaper924 5 лет назад

Thank you very much Have a nice day My Friend

@chathmalnadeela9055 7 дней назад

Can i use 12v 10A power supply for this project

@famouspitbulls8011 4 года назад

hello sir 5000 L how much use Thermoelectric cooler TEC1-12706 plz reply

@MrRlazarev 5 лет назад

Отлично! Как вариант можно для холодной части использовать фильтр, а контроллер использовать для элементов Пельтье и помпы на горячей части. Great! As an option is possible for cold part to use the filter, and the controller to use for elements, Pelt`e and pump on hot part.

@pieceofpaper924 5 лет назад

I apologize for my late reply because I have been in the hospital for the past few days Thank you very much Have a nice day

@orlandobanderas Год назад

Is aluminum from cooling blocks toxic to fish?

@blu313 4 года назад

Hi there, thank you for you effort, what a nice video. Its inspiring for those who wants to use DIY feature on their project. 👍 So the idea on your video is to pump the cool water from your tank through the warm side of the peltier into the water bin, and pump the warm water from the bin into the tank? Is this correct? Can I use DIY external filter (without filter media) for the water bin? I have built a chiller using dc fan, peltier and heatsink, but its so noisy, I can't stand it. And also its not effective since in 12 hrs the temp only drop 4°C from 30° to 26°. I am planning to follow your video. But I still can't understand how it works. If its not to much trouble, could you please explain it for me? Thanks a lot. 🤝

@diegochinchilla3209 4 года назад

Did you solve it? It work? I’m trying to do the same thing

@sumalsebastian 3 года назад

It works but not efficient and things become clumsy and it partially reduces appeal of the fish tank. More over this can be used in either a single medium tank or two small tanks. I used ups to power these thermo electric coolers incase Power cuts happen. Hiding everything in a separate box is the key to make it look better. Go for it only if you really need this like shrimps and sensitive fishes.

@m.yossipratama4514 4 года назад

its working, thanks

@pieceofpaper924 4 года назад

Thank you very much Have a nice day My Friend

@cidskie 5 лет назад

XH-W1209 Temp. Sensor Controller max only 20A , 4-peltier is 24A, will it burn the relay sensor?

@pieceofpaper924 5 лет назад

I think it can't burn the sensor It only makes the Chip Chip inadequate I apologize for the late reply Because last time I was in the hospital hAVE a nice day My friend

@razibislam6886 4 года назад

Did not understand the wire management from 4:10 to 4:37 how did you connect the cables with power supply.

@adesyafrizal3715 3 года назад

Please advice sir... i have the same question ?? And please tell me the spesification power supply ..

@rezaali3740 3 года назад

He drew the diagram wrong obviously. The thermostat comes in between the power supply and the electricity

@randomdutchguy 3 года назад

Ok.....so many quesions. Why a waterblock on the cold AND hot side of the peltiers??? Is that why the extra water tank is needed??? Why not a heatsink and a couple if pc fans. Would that not eliminate the need for that water buffer? Maling it all more easy to use?? The controller looks interesting

@roycejamie8250 22 дня назад

Why not use a heatsink instead of a second body of water to disperse heat?

@pieceofpaper924 20 дней назад

This clip is so old that I don't remember it clearly. This was a request from a friend who wanted me to try it out to see if it would work.

@BuildersBench 3 года назад

does the other tank with hot water gets hot enough? if so, can it be cooled passively? thanks! very interesting project! :)

@Dead_inside.... 5 лет назад

Идея хороша, но для аквариума нужно переделывать. Ведь аквариумная вода содержит бактерии и дейтрит. Со временем водоблок забьется и обростет бактериями. Упадёт эффективность. Холодный контур должен быть изолирован от аквариума. Рекомендую использовать бронзовую трубку как радиатор в аквариуме.

@pieceofpaper924 5 лет назад

Yes Thank you very much for sharing your thoughts with me and everyone In this clip I just want to test the performance of this product for everyone to know To use the fact we will have to do better Thank you very much Wish you a happy day my friend Please share with me your good ideas

@iIiWARHEADiIi 5 лет назад

Бронзу нельза как и латунь. Они содержат медь, а это яд для аквариума и тем более если это креветочник. Так еще они могут содержать свинец, нужно искать пищевую. Нержавека пищевая может быть. Но опять же для человека может и не смертельно, а вот для маленького замкнутого водного объема это вопрос.

@istoppedlaughing5225 3 года назад

Approximately how long will it serve me ??

@deta3d215 4 года назад

i have smilar idea but without cut off module ( i dont know whats the name of the module ) , i want to make one tank with temp as lower as possible, thank you , your video helping me :D

@MithinXavier 3 года назад

This alluminium water block safe for fish

@aigomorla 5 лет назад

You cant use Alu or Copper in a fish tank... The alu will find something to oxidize like steel impellers, and then cause corrosion which will end up killing everything in your tank. Brass is fine if you have no snails / shrimps as it can potentially leech copper. If you can find a titanum or stainless steel waterblock, it will work, otherwise your asking to kill all your fish. Do research on what is considered SAFE metals in a fish tank before you recommend people doing it.

@diegochinchilla3209 4 года назад

Did you were able to get a titanium cooling block ??

@TrangNguyen-jl8vb 11 месяцев назад

Hello, I want to ask, which one will be more effective when using 1 100w chip versus using 2 50w chips?

@devittentapramana7536 4 года назад

Is the water on the other tank not going to boil up? Cuz what I know is, peltier are produce cold on one side and heat on the other side. If its getting to hot, the other side will less to produce cold. Does the other tank do that job?

@bluecavemen Год назад

I wish he had a drawing how it works. Because one side should be hot while the other is cold. Not sure how he has this cool without having a heatsink to get more cold then hoy

@Salibs 3 года назад

isn't one side of the peltier hot and the other side cold? you got one plate to the cold side and another plate to the hot side?

@edevaldosantos1235 Год назад

Hello my Brother, I hope all is well with you! Can you tell me if this project serves to heat the water in the aquarium as well?

@abal2studio 4 года назад

Thank's Bro.

@prm6463 5 лет назад

Awesome

@pieceofpaper924 5 лет назад

I apologize for my late reply because I have been in the hospital for the past few days THANK You very much Have a nice day

@adesyafrizal3715 3 года назад

How much totaly consumtive watt ??

@md.tanveerrahman4153 4 года назад

That's an amazing & interesting project. Simply brilliant. I am staying in Bangladesh where I don't think I can get all the tools required here. Can you please help whether those would be available in Amazon or eBay from where I could bring them?

@ProfinIn 3 года назад

Hello, sir. How it is possible that we all know a peltier has also a warm side yet you attached also same bar on the warm side but stll can produce decent amount of temperature? Does the wirings do the trick? Ty

@AquarioMarinhoDescomplicado 8 месяцев назад

Eu tambem estava pensando em fazer um projeto desse para meu aquário. Mas pesquisando soube que o aluminio liberado pelo "water block" faz mal para os peixes e corais. Por isso ainda não fiz.

@cindyjustme3788 2 года назад

Could you get the temperature to 16° if so..ill buy it from you😬

@alfonsusboy9375 4 месяца назад

I was try this way, but I didn't see any water temperatire goes down, on water flow the cold water block goes up the temperature, without water flow water block will cold, with water flowing it does not cold, to make water cold need time to hold time for the water to stay on cold water block, and that is need to delay up to 10 second, if flowing and flowing it does not happen, water stay on last temperature, will not cooling

@jagannathanj2536 4 года назад

Can u share the details of Water IN Let and OUT let and any standard water circulator available? Your DIY model is impressive and I'm interested to try at home. Do share the details for easy buying options

@crazyelectronicsscience6462 3 года назад

Please give me the product link please 🙏🙏🙏🙏

@aryakusumamade1663 5 лет назад

what is the type Switching power supply you use, and what name the blue box ?? Thanks

@pieceofpaper924 5 лет назад

That's the power supply 12v 20a And the blue piece is Aluminum CPU Radiator Water Cooling

@aryakusumamade1663 5 лет назад

Piece of Paper Thanks Bro 👍

@miorsalman5895 4 года назад

You use power supply 12v5a ?

@dannygowsh 4 года назад

hi do u think I can replace the heating dissipating side with a fan coil rather than water tubing instead?

@s.r.v154 5 лет назад

Which country do you live.....??

@pieceofpaper924 5 лет назад

Thank you very much I come from Vietnam Where are you from my friend?

@s.r.v154 5 лет назад

@@pieceofpaper924 India 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳

@pieceofpaper924 5 лет назад

Your country is great I love my friend's country

@rezamoghadam2884 4 года назад

hi there, it seems really small and use full,Awesome Could you tell me the name of things You used!! im not really professional at this bro

@vaibhavkeer252 4 года назад

1. Blue box with tow opening called water block 2. Chip with black and red wire is peltier module 3. 12v submersible pump 4. 12v power supply 5. Thermostat or temperature controller

@youngbeach6246 3 года назад

Where did u order the peltier from?

@aquariomarinho 5 лет назад

great video! like following the channel

@bangzed1502 4 месяца назад

I was try. This is not efficient for my tank. Power consumption so high and cooling process too long. Now i just using fan only and the result is good for my tank ❤

@Rene046 5 лет назад

it could also be possible to reverse polarisation so you can heat your tank .......

@pieceofpaper924 5 лет назад

^^ Maybe I will make a video about your idea in the winter Now in my country it is summer Wish you a happy day my friend

@amneziaxeaster-gaming382 5 лет назад

If it cools the water too quickly it can stress the fish and even kill them! So it work really good on the big tank of 180 litres!

@kamaljyotikashyap9846 4 года назад

How many degrees did you win

@rogeliomorales5970 5 лет назад

could you make a video for how to make an rimless aquarium??? many likes

@pieceofpaper924 5 лет назад

I made that video You can see it here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eRdwA_Tll-Y.html Thank you very much for supporting me Wish you a good day my friend I apologize for the late reply Because last time I was in the hospital

@talagio90 3 года назад

Em hâm mộ anh quá. Anh có thể bán cho em 1 cái dùng cho bể 40x30x30 đc ko ạ. Mong nhận hồi âm từ anh

@hongquantruong6440 5 лет назад

Mình có làm như bạn nhưng ko hạ được nhiệt vì bên tản nhiệt nước bị quá nóng không thể làm lạnh được như bạn. Không hiểu lý do tại sao. Bên bể chứa nước tản nhiệt dung tích bao nhiêu lít vậy bạn? Học cách phát âm

@pieceofpaper924 5 лет назад

Bạn chỉ nên làm cái này cho hồ nhỏ thôi Hồ to như của mình không được đâu dùng lâu lắm Như trong Clip mình cũng đo bên thùng nước nóng lúc nhiệt độ cao nhất là 45 độ mình phải thay nước trong cái bể nóng vì mặt nóng càng được làm mát thì mặt lạnh càng lạnh Nhưng mình thấy nếu nghịch mà hồ nhỏ thì làm cái thùng xốp bỏ đá + nước như clip sau mình làm ấy lạnh nhanh mà đỡ tốn kém hơn nhiều

@GiovanniAMarletta 4 года назад

ciao, can you publish the list of all pieces/leads liks for buy ?

@inexpertosreef 4 года назад

Se puede usar para pecera marina?

@pieceofpaper924 4 года назад

Thank you very much Happy new Year My Friend

@thanhtuoan7377 Год назад

E đang dùng hồ 90x45x45. Có thể sử dụng phương pháp của anh không.. Cho e xin địa chỉ để mua những món đồ đó ạ

@capdew 16 дней назад

Forget about these, I spent some time researching and finally I found out the pipes in most of these are made of copper. U don't want your tank water to be running through copper or aluminium if u want your water creatures to survive, I dropped this as a solution

@pieceofpaper924 13 дней назад

Yes my friend. It was just a little experiment. It was a request from a friend who wanted me to make a video to prove it. It really didn't work.

@ardhendu1983 5 лет назад

Please give all item list whatever u used. And link from where u purchased

@pieceofpaper924 5 лет назад

You can find them on the amazon or your local sales website I bought the product at a local store Please note when purchasing Chiptec because Chiptec is very fake I have specified the names of the products in the video Thank you very much Wish you a happy day my friend

@ShrenikBhura 3 года назад

@@pieceofpaper924 how do we verify if the TEC is proper and not fake while purchasing. Last time I purchased a 12706, I found that the maximum drawn current is only 3.2 A instead of anywhere close to 6 A.

@lachezari7957 4 года назад

i think if you connect the cold water pipe to the canister near to the aquarium inbound. Then for the hot water add a aluminium radiator or even a water cooling radiator just one like PC liquid cooling and then connect this pipe to external water source as you did may increase efficiency a lot.

@yazhusvlogs 2 года назад

Hi, can you make one for me also

@adityamohan85 2 года назад

didnt work for me with 16 amp peltier, 4 cooling fan, customized twin 10 inch aluminum heat sink for 36 ltr tank. even after using it for constant 20 hours, temperature drop was just .5 degrees. ambient temperature was 33.7 Celsius. temperature of the peltier within 10 minutes of switching on was touching 55 degree celsius.

@ringfirdaus5325 4 года назад

a great idea and very kreatif..itu long white box what ... provide the name of any material that is in vidio ... I want to try at home ...👌👌👌

@pieceofpaper924 4 года назад

Thank you very much Have a nice day My Friend

@harrybeta 3 года назад

Cooling the fish tank water must be slow,otherwise fish could be sick.

@pieceofpaper924 3 года назад

Thank you very much Have a nice day My Friend

@shubhamkasera 3 года назад

Hi, are you willing to make one for commercial use? I don't mind buying one of you :)

@pieceofpaper924 3 года назад

Thank you very much Happy new year My Friend

@waterblock20021 3 года назад

To purchase these products please visit our website : hariimpex.online

@fredveto49 3 года назад

GREAT TUTO .... clear and practice

@pieceofpaper924 3 года назад

Thank you very much Have a nice day My Friend

@shortyleatherworks5693 4 года назад

How many Amp power supply you use? And how many liter of water on external tank for radiator?

@aquathoughtsforyou4434 2 года назад

Can I run this 24/7 ? Does it consume lot of power

@pieceofpaper924 2 года назад

Actually, I just did a test for everyone about its effectiveness If you actually use it, you should use professional equipment like that to save a lot

@giadagarbo9155 4 года назад

Hello! Amazing video and work. I have a 200 liter fish tank. I can use the same elements or I have to boost up them? If yes, what do you suggest me? Thank you so much

@kamaljyotikashyap9846 4 года назад

Im curious too

@trungtn87 5 лет назад

Cùng câu hỏi với mấy bạn trên, mấy thiết bị đấy có thể mua ở đâu bạn nhỉ. Thank, clip rất hữu ích

@pieceofpaper924 5 лет назад

Cảm ơn bạn nhiều nhá Mấy nay mình ở Viện nên không trả lời được Mấy đồ trên bạn có thể mua trên Shopee có rất nhiều mình đã ghi rõ tên trong Clip Chỉ có cài sò là mọi người chú ý nhé lắm đồ đểu lắm nên phải mua ở chỗ uy tín Mua về phải thử ngay lập tức nếu không xuống được âm độ thì là đồ đểu Lắm sò mua về xuống được có mười mấy độ thôi Sò thì trước mình mua ở linhkienvn thì phải Cảm ơn bạn nhiều nhé

@phucxuongong2176 5 лет назад

@@pieceofpaper924 ôi bác việt nam à ,e cứ tưởng nước ngoài chứ :) .bác cho e hỏi cái xanh xanh để gắn sò nóng lạnh đó tên là gì ạ ,và mua ở đâu là có nhiều ạ .

@nazirulhariz5256 4 года назад

Sir, If I want to increase the water temp, thats mean I need to use the hot side into aquarium am I right?

@pieceofpaper924 4 года назад

Basically right But if you want to increase the temperature of the tank you have to use dedicated heating for the aquarium, because the heating of the aquarium is much cheaper and also more energy efficient. I am sorry for the late reply Thank you very much Have a nice day My Friend

@nazirulhariz5256 4 года назад

@@pieceofpaper924 noted..thanks sir

@irwan5324 5 лет назад

can it be used for marine aquariums?

@pieceofpaper924 5 лет назад

I'm not sure about that either Marine aquariums need specialized accessories Perhaps using genuine products would be better Because a marine fish tank is very expensive I apologize for the late reply Because last time I was in the hospital

@lihwoei 4 года назад

Take a good care

@naanVimalSarminra 3 года назад

@mr. blackpantherplayz where I can get titanium water block

@indranildalui Год назад

How much this products?

@udaydas6291 3 года назад

One water block will work? one peltier how litters water will cool?

@asepsuherlan-cn2px 2 месяца назад

mantap sungguh ribet mau nyari dingin 😂😂😂. di tempat ku suhu 24 derajat cukup pake kipas fan aja

@hobbyman1971 4 года назад

That’s a wonderful project bro! Where did you buy all the components for this project? Thanks

@rajeshakula8376 3 года назад

Hi im from india any diy chiller suggestion for my 700 liters planted aquariuem

@SGXMotoVlog 4 года назад

Chờ clip làm chiller cho hồ trên 80L mà mãi chưa thấy a ơi, mong có clip chỉ đường

@see4web 4 года назад

Will it work if current summer temperature is 48 to 49 degree celcius?

@pieceofpaper924 4 года назад

Thank you very much Happy new year My Friend

@deepjoydas2630 4 года назад

Yes ,its work

@htnana321 5 лет назад

Hi.....I'm using 3 tec 12715 modules with 12v 20A power supply......the heating part found to be having too much heat even after using car coolant with water and a small radiator setup for cooling the coolant.....is that ok to run for more than an hour....???

@pieceofpaper924 5 лет назад

You should use a larger cooling water tank to keep the temperature stable The maximum temperature I measured was 45 degrees

@htnana321 5 лет назад

@@pieceofpaper924 I'm now getting the max of 49degs.. Is that ok.... I'm using 1litre of water n car coolant mixture

@htnana321 5 лет назад

@@pieceofpaper924 and may I know the size and volume of your scaped tank??

@ngothuan2831 5 лет назад

Xin fb hay Zalo bác ơi. Minhf muốn mua 1 bộ

@pieceofpaper924 5 лет назад

Mình không bán hàng bạn ạ Mọi cái bạn có thể mua trên SHOPEE Chỉ có cái sò nóng lạnh thì bạn chú ý khi mua nhé Vì sò này ở mình nhiều hàng dởm lắm Về sài không xuống được âm độ đâu bẠN Mua sò phải mua của chỗ uy tín và về phải thử ngay nếu xuống được âm độ thì với chuẩn còn mình mua mấy sò toàn xuống được có 15-16 độ thôi lắm hangnf đểu lắm

@sajidurrahman2467 3 года назад

Hello! Water is getting hot on the heating side, aquarium is cooling but not that much, my aquarium water volume is 130liter, I have used 4 peliter 12706. Can you please help me out.

@tanmaysarkar7342 2 года назад

I am sorry but I tried to cool down my 50ltr tank with 3 peltier 12706 but the temperature is not decreasing after 27degree centigrade... Help me with some information

@kimnue 3 года назад

so u use one more water block and pump for reduce heat too. does it better than fan

@pieceofpaper924 3 года назад

My friend These are just tests requested by everyone I have not tried using it for a long time But the water will be better, but the water will evaporate and the radiator fan will be different

@leonkubiak5928 Год назад

What set i P1, P2, P3, P4. I need in my Aqua 25 C.

@MrOlt753218 4 года назад

I can't do it. Can do 27-28 .. degrees. Room temperature 33 degrees. 24-inch fish tank. Outside filter 45 liters of water. Raise water plants and 30 fish

@adesyafrizal3715 3 года назад

Brothres, can you tell me abaout the power supply spesification for this video ?? I want to try build this device... tks my broh.. tks...plese advice about that. Tq

@shimma2009 3 года назад

Hi am from india, 12gallen Plated Tank, i using 12705 (2nos) Peltier kit for online, But the temperature is not meet as bellow 28.3. can you pls give suggestion.

@anubhavshrivastava365 4 года назад

Wrong power supply, why can't u give individual supply to Pieltier, it was more effective

@jongchunjin8927 2 года назад

hello there, I have been follow ur video and did everything same as you but I have been end up the temperature only drop for 0.4C(28 C room temp) for almost 1 hour and the hot water goes up to 40C, I wonder whats the problem actually

@lequangvinh9x 5 лет назад

cái hộp mầu xah có 2 đầu in out đó là thiết bị gì và có thể mua dc ở đâu hả anh. Em cảm ơn

@pieceofpaper924 5 лет назад

Cái đó là cái tản nhiệt dung dịch của máy tính Mình chế thử nghiệm vậy thôi

@GM_handle22 4 года назад

Thanks a lot man.. you saved my money, what are all idea i have in my mind you tried out and gave the results. 🤩

@BungToba 5 лет назад

Can i use jerry can as reservoir for the cooling water (hot side) or it has to be open reservoir?

@pieceofpaper924 5 лет назад

I only know if the hotter side of CHIPTEC is cooler, the cooler side of CHIPTEC will be colder Thank you very much Have a nice day My Friend

@ianrafaeltoh7679 2 года назад

It's a perfect substitute for chillers if you have a 10 gallon tank or 5 gallon tank. Using a chiller on such a small tank is overkill.

@lucifelmartell 3 года назад

Bro, I don’t know how you take your temperature from 27.5 to 23 to 24. I made the same set up but mine is not cooling even my 1ft cube tank . I use ice to take my water temperature from 30 to 26, and then switch on the peltier module. It just maintains 26.6 from there on…. I am having massive energy loss somewhere let’s see.