Live training can be overwhelming, hopefully these CAM Skills events help to fill in the gaps and continue to expand your knowledge. Subscribe to our RU-vid channel and also to our newsletter at the bottom of every page on mlc-cad.com
Thanks for the video! I've been using 2D dynamic mill for roughing on our old Doosan vmc's (old 2d license mcam). They were display models so their memory size is only around 300kb, so the arc filters are an absolute must. I am having good success with smooth cutting motions, however when the machine is repositioning I get a lot of jerky moves, even with the minimum tool radius set high, microlift set at .005" and the feedrate the same or similar as cutting rate, and gap distance set high. Any tips on how to smooth things out? I feel like I'm going to burn the servos out jerking the thing around and as the sheet metal enclosure rattles away..
This sounds like something we could assist you in troubleshooting, but I don't have any blanket tips to help without digging into the problem. If you would like to renew your maintenance to access support or inquire about employing our services to help you resolve this issue we'd love to work with you. www.mlc-cad.com/contact-us/