Foe the xtx clutch that you took out, i assume the slip is cause by that shaft seperating as it spins? If thats the case, you think a guy could just put a weld the two sides together, basically making it one shaft?
That might work temporarily. My guess it is will be very short term, then you'll be buying these parts and the main shaft. Let me know what you figure out. If you just want to fix it right use DISCOUNT Code: MNMSAVE10 to save $$$$$ www.ebay.com/itm/234192100101
@@MidNebraskaMotorsports Hey, thanks for the reply. I ended up just cleaning everything up really good and then switching to a friction modified gear oil and seems to do the trick.
Awesome vids my man. My 08 XTX does nothing when I shift gears. Ran fine, parked it, next time no power to wheels. Motor runs but gear shift changes nothing. Any common issues?
Hello, I have a 08 prowler 650 xt. There is a clatter in the rear end once you let off the throttle. What should I look for? Any help would be appreciated. Thank You.
I'd start by draining the oil in the rear diff. If you have particles then I'd tear into the rear end. Boots good on the drive axles? Here is a link to the parts I'm guessing you'll need. www.ebay.com/itm/234192100101
If you order the kit you will get the right sized axles. Some people order just the gear hoping that their axles will fit......they WONT. You have to buy the axle for the gear. Thanks for watching and the question! www.ebay.com/itm/234192100101
Not sure which axles you are looking at but they are different. Thanks for watching. Here is a direct link for the kit you need: www.ebay.com/itm/234192100101 Let us know if you need anything else.
I’m a little unsure what you are saying here but you should buy this kit. I bet it’ll fix it. If you need more helpful tips, check out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0AdFxkJiOg.html and if you need parts: www.ebay.com/str/midnebraskamotorsports. thanks for watching and the comment.
When you are underneath a SxS, it's hard to talk and work and get a good camera angle. I thought I stay out of the way and just go through the complete process. Thanks for watching anyway!!