This video will show you the basics of controlling an Arduino through bluetooth. You can find downloads and a full version of the code here: www.tinkernut.com/2014/03/09/a...
Amazing, for an Arduino beginner this is great feeling when everything works :) Already coming up with ideas to create with bluetooth. Thanks for the video it helped!
As a student trying to figure out how to use the bluetooth modules this was amazing! Thanks for this amazing tutortial, I can now proceed with the goal for this project of mine :).
hey I am using HC-06 and it's working perfectly on both 3.3v rx tx level and with 5Vvel, d level don't hesitate trying any of them it's so stable but I am wondering why can't I send data over Serial monitor too while I'm receiving the data which Arduino sends over Bluetooth on the serial monitor ?!!
Awesome video thank you, questions I'm trying to use a relay switch to a Bluetooth to turn on a light by a vibration sensor to a Bluetooth so I have no wires can you help
i want to make a similar project but, i want after detecting the phone using NFC i want my phone to be paired with my computer's bluetooth. is it possible?
You have videos for a lot of things I had been looking throughout the internet for a long time (like key logger, how viruses replicate and this video). Keep it up :)
Thanks for the video. I had a problem with getting it to work, but I have figured it out. My Bluetooth module is operating at a different baud. (115200). cool stuff. thanks a lot
How come other tutorials are putting voltage regulator for the tx in on the arduino to prevent damage to bluetooth because it states only 3.3v ont he txd pin on the bluetooth module??
Thanks alot for your important information Tx comes with Rx and Rx comes with Tx. I messed up with connecting Rx to Rx and Tx to Tx like I used to connect an Arduino Pro Mini via Arduino Uno to PC.
Hi am new to Arduino and just getting my feet wet. One basic question what is the difference between the HC 05 bluetooth module and the BLE shield that I see on other videos. The other question I have is have you used the HC 05 to control more than one appliance in the same project? any advice and code share will be much appreciated. Great instructional video by the way.
i set it up exactly like yours. but when i touch 13 the light wont turn on or when i send 1 to the module. But when I move the sliders the light comes on and turn off at particular point on the slider. any suggestion would be nice.
for TX and Rx there is a 3.3V level, so according to me we should be using resistors or potential dividers as the uno board output is 5V. am i right???
is it ok to install this in my motorcycle for key less.? but my problem, i want my andruino only my phone can connect the bluetooth.. can you give us, or link us the tutorial thank you.
Can you make a tutorial on how to use these Bluetooth modules as a transmitter? To be honest I want to make an audio transmitted so that I can connect bt speakers and headsets to it. The ones available on the market are quite quite expensive so I thought if I can utilise one of these modules it'll be cheaper.
Thanks for video. With my at-09 (cc2541) it seems impossible to pair with mi6 android phone. i tried many alternatives such as password, connections (3,3v and 5v ) etc. do you know the solution?
Is there a way to use hardware serial (arduino RX/TX pin 0,1) with Blynk app ?? I know the standard code use the software serial but I don't have anymore pin available on digital.... Can't figure out how to use pin 0/1 with Blynk..... i search on google and can't find a complete working solution Thanks for your support
Thanks a lot!!! I faced some troubles with my HC-10, but you tutorial has helped me :)) Great video!)) Code I've used is below: int LED = 12; int state = 0; int flag = 0; void setup() { Serial.begin(9600); pinMode(LED, OUTPUT); digitalWrite(LED, LOW); } void loop() { if(Serial.available()>0) { state = Serial.read(); flag = 0; } if (state =='0') { digitalWrite(LED, LOW); if (flag == 0) { Serial.write("LED: off"); flag = 1; } } else if (state =='1') { digitalWrite(LED, HIGH); if(flag == 0) { Serial.print("LED: on"); flag = 1; } } }
Hi, I've connected me up to my bluetooth device HC-06 via smartphone. When I try to use it disconect off and applying again so that bright flash its on, and ready to reconnect!? Do you have suggestions on what I should do? I have unfortunately no more Bluetooth devices to test with. Please help me :)
Nice intro! I have a ball launching machine with 4 motors controlled by using arduino uno + adafriut shield V2. Is it possible to remote control the power (12V) so that I have the freedom to turn the machine on/off from a distance? Any help?
Hi I have followed all the directions from your video and have established connection with the bluetooth and my phone. However, the LED will not respond when I send the signals from the Smartphone. The only difference between your case and mine is that I'm using a Arduino Leonardo instead of the Uno.
I want to connect an Arduino Uno to an Android phone via Bluetooth. Between these two modules(HC-05 Bluetooth Module and JY-MCU Bluetooth Module) which one will be better ?
Is it possible to send information from the Arduino to the Android App? I.e. press a Button and the Bluetooth Module sends some information to the paired Android App?
I built the game snake on a Arduino Uno board with a bluefruit LE shield and 16 x 16 light board. I can use my smartphone and the bluefruit app as a controller. It works great! But now I want to make it multiplayer. Can the bluefruit shield which I understand is a peripheral device have multiple discoveries and connections?
What Bluetooth module should I get? Can someone suggest any specific sellers, I would prefer to buy it on amazon but there are so many to choose from, how do I know which one to order? It's hard to figure out the manufacturer because they are all so similar but don't have any markings telling where they came from. Also, what is the difference between slave and master? And why would I need one or the other? Thanks!
+christopher jones what's the diff between the 05 & 06 ? i see one has more pins than the other. BTW i own like 20 nRF24L01+ and im yet to use it for my servo Tx or IMU Tx tho the example sketch does work on all maybe we can link up
hello @tinkernut Labs. I am NOT able to "connect" my "already paired" HC 08 bluetooth module to mobile (android 4.4). I have tried different apps, ArduDroid, Bluetooth SPP Pro, Bluetooth Terminal. But hc 08 still never connects, but only gets paired. On serial monitor, it shows OK+connected, the led on HC 08 is constantly on after pairing and remains until the connection finally fails. Any suggestions, what is wrong?
hi! can i use bluetooth module to communicate between arduino and android smartphone to act as proximity sensor. what i mean is when bluetooth signal less than certain value, android will trigger some action (for example sms) to phone. for this i am using 1sheeld
Hi, i have a question and i hope you guys can help me with this. how does the arduino actually know actually know which data it is going to send or receive? in which part of the code does it do that? i want to make two arduinos one having a HC05 as a master sending data over to a HC06 slave on two different laptops. I hope you can answer me.
from 2 day i am trying to on led by hc-05 ..but nothing happen . But Today i upload code to arduino without connecting any wire of hc -05 and led and.... this work And thanks for this video ...
I am able to pair the bluetooth to android and connect it within the app. But when sending 1 or 0 the LED never lights up. I'm not sure what I could be doing wrong- any help would be appreciated!
Hi, I have the same problem, when i am connected to bluetooth device and press 1 then nothing happens. If I press repeatedly then I lose connection to Bluetoothdevice?
HELP plz, I can receive every command from serial monitor on my phone but I can´t send anything, no reaction. I use Arduino Uno and the HC05 bluetooth module (has 2 more extra pins, Key and 3,3V... unused) thanks in advance