Fully Automatic Egg Incubator with Humidity Control, Egg Turner, Automatic Egg Rack Centering System, Door Open Notification... download link for code here: drive.google.c...
Hello everyone, I would like to thank our friend very much. He worked hard and did it. The electronic parts used were used as they were. But there are bugs in the software. It was fixed especially in the time settings, it was constantly causing errors in the software part. A 330 ohm resistor was used when using the keys. It works stably.
Thank you for project here are my request if possible to assist:: Can you add RTC to maintain the hatching time in case of power down. Please add DS18B20 sensor to complement the DHT22 in case one goes faulty
thank you for this project, this project really interests me and I would like to carry it out please can you provide us with the wiring diagram of the components.
I have a question, please. I use the same Dht22 sensor, but when I run the incubator for an hour or less, it tells me on the LCD display that the sensor is not working. Have you ever encountered this problem?
Hello Sir, I am not sure if you are still active on the above project: I can not see how you connect the rack centering limit switch, please can you do sketch diagram for it and also explain where you have positioned it maybe a photo of the really working system where you have put this switch will help. regards Joseph
Hello Sir, I am not sure if you are still active on the above project: I can not see how you connect the rack centering limit switch, please can you do sketch diagram for it and also explain where you have positioned it maybe a photo of the really working system where you have put this switch will help.
Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega328P" eggicubator:14:10: fatal error: LiquidCrystal_I2C.h: No such file or directory #include "LiquidCrystal_I2C.h" ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. exit status 1 LiquidCrystal_I2C.h: No such file or directory This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
I have my egg incubator built. I tried to type out your code from the video but it seems buggy. Maybe you have changed it since the video or I just suck at typing it out haha. I look forward to the INO file link. :)
im very sorry for my late response for your request, i couldnt respond to your emails right away because my laptop was stolen and all my files are in there... but now i have manage to retrieve some of my files tru internet including the file of this video download link of .ino files of this project: drive.google.com/drive/u/0/folders/1x9pm31RWJkGRFVut8SHFzbiZarufxlZO feel free to modify some codes of your own and let me know the results and hope for the best... thanks
Please can you assist as to why the Spin ( time between turning), does not reset to the original set period. ie when set to 1hr it will reset to some figures more than 1hr like 199:187:999hrs
salamat bro, but one last pangutana bro...pde ba sa esp32?.......if so, what are the changes sa libraries bro?........salamat advance sa tubag !!!!!!!!!
...bro!..pang 3.27 subscribers here!!!!!!!! what if blockout occurred..will all the data, settings etc. be restored? If so, how about adding features/module?..We would love to watch it.......
error showing plz tell us how to solve Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega328P" eggicubator:14:10: fatal error: LiquidCrystal_I2C.h: No such file or directory #include "LiquidCrystal_I2C.h" ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. exit status 1 LiquidCrystal_I2C.h: No such file or directory This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.