Are Bullpup Rifles Safe ??? (When Guns Go Boom EP - 11) 

You should go to drive tanks

The P90, please. If you havent already did it

Buy a 50 bmg pistol

Guns go boom- 4 bore edition

Yes a new vid thank you Scott lol😂

ahoy viewer(probably), a man of culture

@@sar_ptolemy I also watch Lemmino if you know who that is

After his .50 accident, Scott's been out for blood

@FourByteBurger and no eggplant, jar of mayonaise, jar of nachocheese, foldable table or jar of cocoa

@@jamdc2000 And there's always Poupon EVERYTHING.

I've always wondered what it would have been like to get pulled over by Scott.

​@@0neinch deadly or hilarious... or hilariously deadly.

He would search your car for slap-rounds ​@@0neinch

a man's gotta do what a man's got to do. 🤷‍♂

Hello... State Farm? Yes I would like to report a damage claim on my Chevrolet Silverado. Yes. Uhh.... hit by a zombie-blood stained piece of a table top. Yes. Yes. I know, I realize this sounds crazy but...

Anything's a weapon if you're willing.

Your mind is the true weapon. Everything else is just a tool!

@@floridagunrat1625 You got that from a Calendar?

hatchet,s axes, cleavers, wrenches, crowbars, aluminium baseballbats the list goes on and on

​@@InfamousMax Pencils. 😏

AUG's and Glock's are excellent/reliable firearms.

Einfach für mei eigene Ruhe....Vizeleutnant?

@@tmgpurify3458 Too much plastic.

@hardlylivin6602 still reliable though.

*Good to hear, that's why I recommend he do this with the Tavor 7; I own one.*

I don't know weather to say I'm sorry for your rifle or say it's awesome you got a replacement so easily

good to here you didnt get harmed buddy

The X-95 is an Israeli gun, so you can expect quality

Yeah, Tavor's receiver is BEEFY under the polymer outer case. It is made out of aerospace grade 7075-E6 hard-anodized aluminum coated in Teflon. Even the polymer parts are high-strength impact-modified polymers. X95 SBR(Micro Tavor) is my Fav! Even after attaching a normal-sized suppressor to that 13" bbl, it is still as short as an MK18 unsuppressed and stock fully collapsed.

Plastic shrapnel loses it's energy much faster than aluminum or steel

Its probably meant to be the weakest point. After all the pressure has to go somewhere.

The KT plastics are of good quality and totally adequate for the intended purpose. I'm impressed with how that gun held together...many others would have had the bolt leaving the receiver at good velocity. Anyone making fun of KT is kind of showing their ignorance...they make innovative products that work well and stand behind them with a good warranty.

@@recoilrob324 I own 4 KelTecs personally, this video has not dissuaded me from using my RDB or KS7 in any way. In fact I feel even more confident they will protect me from a catastrophic failure.

Videos I love your videos

Underrated comment xD

A lot of ar’s are usually polymer so being metal is actually a bit different

could still be too flimsy to withstand that .. but i guess the best outcome for this mishap would be to try to design the weapon in a way to direct the exploding parts away from the person handling it (this obviously only works for right hand or left handed shooters exclusively)

its a kel tec, they would make the barrel plastic if they could

​@@rjtrageser9884hah...I thought about getting one, their not too good in some ways after looking into it but I just really love how they look.

I imagine if you were to be wearing a military-grade jacket with thick sleeves, you'd get away with superficial wounds in that scenario. Hard to imagine anything penetrating to the bone or severing some blood vessels. Definitely won't be pretty but this gun is well-designed for failure, as evidenced here.

@@Krom5072military grade is the cheapest bidder 😂

@blakew5672 I love mine :) I bought it 12 years ago, and it still runs like a champ :)

Instead you got a man in need of checking for a brown streak

I started turning the volume down the moment he pulled out the bullet so it wouldn't blow out my eardrums like usual.

This is the first time I planned ahead and lowered the volume for that section... and it's the first time he didn't do it. I got reverse jump scared.

hes conditioned you all beautifully

Once we are lulled into a false sense of security he will be back...

Condolences, mate.

My condolences.

Bless her soul. 😇🙏🥰

Sorry for your loss😢

Sorry for your loss man

I read that first part in his voice, lmao. Damn I'm getting old. I too was hoping that he wouldn't blow that beautiful AUG up, lol. Probably my second favorite bullpup design besides the Tavor/X95. I only like the X95 better because it's easy to switch the ejection side, and I need that ability because I'm wrong-handed. I think the AUG can do it as well, but not sure.

"Sharp as a wet bag of flour" 🤣 I say I say I read it as foghorn leghorn too. And was frightened for the AUG as well but I was just expecting it eventually. I thought it was just it's time...

Same, totally went ready to be angry about destroying an AUG.

"everything blew out the bottom"...never eat gas station sushi XD

makes me wonder tho how this wouldve went with sth like an aug that doesnt have a metal top cover

Casually hits the cam lol

Bro, I’m smoking too much I didn’t even notice it😂

Bullet casing junpscafsre

​@@MotivatedFurry jump scare? 🤣🤣🤣 juncarspsed

scott is a monster lmao

Mans a beast!

I dunno man he let out a dad sized grunt when he picked up that zombie bust.

We do. We do...

Todays Arnold

I've never shot 300blk. How difficult is it to keep 300blk subsonic with a 16" barrel?

@@AndyAdventuring As it turns out, it can be a challenge. More difficult than typical 300 BO barrel lengths (6-10"). It also will depend on the suppressor that's attached, as some cans will "boost" velocities slightly. Best bet is to try several brands, along with different cans if possible, in order to find the right combo. 220 gr weight is generally subsonic even out of 16" barrels, but again there are other variables. If you have the ability to make your own rounds then you can really tune it well for both proper cycling and subsonic velocities. Note too that the AUG 300 BO setup will usually need the gas on the "full" setting for subs, which is the opposite of most suppressed rifle setups. This has to do with the gas piston being further forward than a normal pistol-length gas setup, requiring the gas to travel forward through the specially designed sleeve (thus reducing overall pressure).

@@AndyAdventuring RELOAD. I HAVE A VIDEO SHOOTING 10 OR 20 300 blk suppressed but with an 8.5 inch barrel. its hard to hear anything but the action and the brass. oh and thats full auto. those arent the most quiet i load. i cant say for sure without going out to look which powder i used but it was just over 7 grains with a 168 gr bullet that cycle the action and they are very quiet.

I'd be very surprised if the Aug doesn't have a similar steel plate to reinforce where your face goes.

@@WJS774 I don't see any steel plates, but it's fairly thick right around where the left hand ejection port would go (NATO stock). That and the plastic they use is pretty strong (doesn't flex or feel flimsy, maybe nylon fiber reinforced?). My guess is the thick/strong plastic, the robust BCG + chamber, and the lower possible pressures (compared to the 308 in this vid) all contribute to the lack of any steel plates in the stock.

To be hair has first HAND experience 😢

​@@applejuice9468 what hair?

@@D3VIOUS24He’s going to be it

Rather, the metal receiver would jump upwards, producing an effect comparable to a good punch in the jaw. I mean it's definitely unpleasant but miles better than the rifle exploding in your face like we seen with some other products in this series.

Well now I did...

Muzzle brake, not break.

Demolition ranch did it with suppressors, I dont know if that tickles your fancy, but it exists

Didn't FPS Russia do something like that? I know some gun tubers have made breakfast on AKs before. Bacon, eggs, etc

For science!!!!!!

That's gross and I'm here for it! Take my like

I wish I could like this a 1000 times

he is a former cop isn’t he?

Tactical assault squirrels at it again.

But he didn't do the 3 tactical rolls? Shots fired, My legs, I can't feel my legs.. LMFA0

Takes "treat every firearm as if it is loaded" to a whole new level🤣

@@forgedmetal9355 😄

They make plenty no sweat

Except he is not testing under normal conditions. If it was unblocked spicy round then blocked normal round. Then you would really see what a realistic failure might look like. This test is blowing it up to blow it up. I would hope you can feel a round triple loaded on powder.

On a per capita basis, there were 14.6 gun deaths per 100,000 people in 2021 in the USA. - wouldn't say that is a high safety margin you're dealing with.....

@@EgonSorensenShh let them have their delusions 🤣

Lol that is hilarious comment..

@@EgonSorensen I'd say using gun deaths per capita is a bit unfair when talking about gun safety, especially within the context of @ValidSurvival comment. First off, per capita deaths is very rarely good data. Raw numbers are almost always more useful if you mean to provide unbiased data. For sake of argument I'll stick to your numbers for 2021. As per the 2021 numbers provided by the Pew Research Institute, there were 48,830 firearm related deaths in the USA, 54% of that were suicides, 43% were homicides, 1% was officer related, 1% was undetermined and about 1% is considered accidental/unintentional. I think it's safe to say that intentional discharge resulting in death should not be factored in to a greater discussion of safety, as well safety clearly isn't a factor in a scenario where people are intentionally harming themselves or others. @ValidSurvival comment was on proper handling and maintenance by the firearm community at large so it's really only fair to use that 1% of total gun deaths per year, which in 2021 would have been 549 deaths out of the entirety of the USA, which has a population of 332,000,000 in 2021. That seems pretty damn safe if you ask me. Don't get me wrong, there's always room for improvement, and every death is a tragedy, but let's not lie about numbers just to get a point across especially when it's this easy to find the numbers. www.pewresearch.org/short-reads/2023/04/26/what-the-data-says-about-gun-deaths-in-the-u-s/

I think about it a lot. It's actually kinda nice to see how well this one did.

He said your face would be okay. No. You'd lose hearing. You'd have hair singed. You'd probably lose an eye. I noticed the dummy's jaw get slapped sideways when it went off. Things would get damaged, if not from debris, then from the shockwave.

got a nice rhythym to it

11:09 is good too

Dude, there's a reason we have extremely few guns in the UK. Let's enjoy them from a safe distance.👌🏿

​@@V4Nowyeah, and soon you'll have very few knives and clubs also.

​@@mikewhitman745*Laughs in Getting Glassed in London*

​@@rvanhees89still more knife crime per capita in the states than in the uk

@@Lilith-Rose Yeah, which kind of proves that the problem isn't the guns, doesn't it? Even with how much easier it is to get guns in the US, there's _still_ more knife crime than the UK. You could get rid of every single gun in America and even if not _one_ of those murderers would simply use a different weapon instead (which is a totally absurd proposition) the US would still have more violence than the UK. But tell us again how getting rid of guns will fix the problems in the US...

Ban "Assault Knives"

Dafuq

I think you just gave Ian McCollum acid reflux! Gun Jesus LOVES French firearms.

@fabienmargerie6815 While it does have some visual similarities, the action itself is based on the FAL. I even uses metric pattern FAL magazines.

Had a good laugh 😅

He got poupon his boots!

An MG42 is about $250k.

People give Keltec a lot of crap for making not-fancy guns. That doesn't mean they make crappy guns. "Simple, durable and cheap" is a reliable customer demographic... as long as you don't screw them over with a flop. Snobs, on the other hand, will often excuse their brand of choice for making a flop "because they're so cutting edge that sooner or later something will end up in production that could only have been caught with 10 years of field testing".

@@andersjjensen Thanks for the insight 🤠👍