Are your waders ruined? How to fix your waders! Use Flex Seal spray & Flex Paste to fix them! Part 1

Подписаться 3,1 тыс.

Просмотров 9 тыс.

50% 1

I’ve tried many ways to fix my fishing waders. This looks like it’s going to be my best fix yet. I did not emphasize in the video enough that you need to make sure you adequately clean the entire area that you will be applying flexseal to.

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@brianwilson4861 6 месяцев назад

I've found the best fix to be plain old silicone sealant. Mine had gaping holes in the seams in the crotch. I put on multiple coats of flex seal and as soon as I got in the water the flex seal tore and leaked. I bought some loctite brand silicone sealant and filled in the area. When that cured I started putting on several layers of silicone on top of that. The silicone seems to bond to the rubber better then the flex seal.

@northwoodsdiscovery6962 6 месяцев назад

Wow thanks so much. I wish the waders just lasted longer. There has to be a better material. Thanks for watching.

@farhanb4914 Год назад

U should work for Porsche in their spray booth and body repair section.. lmfao😂❤

@northwoodsdiscovery6962 Год назад

I will apply. lol Still trying to figure out what I want to be when I grow up

@sweetbeep 2 года назад

I got rubber boots from Five Below store for $5. I use a wool insert padding I got in Sweden. And I use Dollarama $4 100% wool socks. Wool absorbs massive amounts of moisture and is naturally antimicrobial so it never stinks. These $4 wool socks are one of my most prized possession because of when I wear these boots. I hate wearing sweat-soaked socks inside my boots! Hard to find 100% wool socks these days!

@northwoodsdiscovery6962 2 года назад

Most of them time Mine are sweat soaked and river soaked lol

@tuwannarico 11 месяцев назад

I opened my paste to see what it looked like then closed it back same way.. week later ready for project and it’s hard the whole can. It’s 28* so not sure if the cold hardened it but can I melt this stuff to soften it??

@northwoodsdiscovery6962 11 месяцев назад

I would not risk it. The heat will most likely change the quality.

@sweetbeep 2 года назад

Is there something that can be done to the waders to prevent cracking? Like when ppl use conditioners on their leather car seats?

@northwoodsdiscovery6962 2 года назад

That’s a great question I use and abuse these so much. I use for hunting fishing lure finding and walking in the woods in early wet spring. So much abuse.

@Cabinlab Год назад

Gear Aid "Revivex" rubber boot treatment 👍

@FabulosoSpray Год назад

How has the flex seal held up since you've used them?

@northwoodsdiscovery6962 Год назад

Well it got me through another season it’s not perfect but since I know I’m gonna get wet and I’m only using them for 3 to 4 hours at a time. I just keep plugging away so much better than spending one to $200 every season on a new set.

@FabulosoSpray Год назад

@@northwoodsdiscovery6962 I hear you 100% man. I had bought a cheap pair of Dunlop boots and plan on doing what you did. We'll see how it goes! Thank you again brother!🙏👍

@tuwannarico 11 месяцев назад

If paste hardens in jar can I heat it up to soften it??

@IvanMcdonough-e9l 9 месяцев назад

Dude I’m in my waiters from Spring I stop for the summer I’m in three seasons just got a pair of waders last month and they’re fucking ruined frog tog made in China no offense to the Chinese but they make some crappy shit supply in the man I guess you would think with the biggest Fishing Industry they would cut you a break on your waders better fabric better ideas but I’m gonna try this spray shit hopefully it works rubber on rubber rubber or neoprene much should say hopefully it seals the deal lol get it

@northwoodsdiscovery6962 9 месяцев назад

lol Yes I get it and I am frustrated too at the poor quality items that are hitting the shelves. Let me know if this worked for you. I bought another pair of waders as a backup.

@IvanMcdonough-e9l 9 месяцев назад

My problem is I can’t wait 24 hours lol

@northwoodsdiscovery6962 9 месяцев назад

oh boy i know the feeling. how is the repair going.