This protector is definitely on my Christmas wishlist. I have been screen-protector-less for 5 months now, and its been scary. Nice video as always, Udroid!
armorsuit also makes a case friendly version. I have that paired with a spigen tough armor case with no lifting. also works with the otterbox symmetry as long as the screen protector is aligned properly.
Awesome video! I wanted you to get this Screen Protector because i bought this protector, and i loved it! It is not all case friendly, but with the most cases it fits, Thanks a lot for the video !
+FradG You're welcome. Yup I did find a few cases that it does not work for. Now I will be working to test it out. I have some other film protectors in too so I will compare it against those.
your videos are very informative, very professional and very thorough. great work. keep it up. I subscribed after watching multiple consistent content!
On my 2nd armorsuit for the s7 edge. First one started peeling because of my unicorn beetle case. Lasted about 8 months. Paid a few dollars for shipping and they sent a replacement. Not bad.
+FlushHella Very nice. I actually just biught another armorshield myself. I have to work on part 2 for that video after the new Zagg protectors... which reminds me. I wonder where my order is. I will have to check.
Very thorough review! It seems like the armor suit has the less of the "orange peel" texture on the screen. Now Im debating between this ArmorSuit and the Skinomi Matte. :)
+Juan Hernandez Nice! I like it when I hear that I am not alone. 🙄😀😁. Yea, I usually don't use film but this one is not bad at all. It's definitely a GO!
For anyone asking if this screen protector will work with a certain case, you can e-mail armorsuit and tell them what case you're using and they will costume make it for you. I ordered this screen protector to use with my otterbox commuter, the screen protector was a little too big so i made a new ordered and they custom made me one for $6 and now it fits perfect.
thank you for finally reviewing this! I was hoping for a U droid review for the militaryshield:) But you should test the case friendly version becuase i think it will work with the cases you tried
I think the Pixel Xl and the S7 edge are still the two best phones but there is alot to love with the Mi Max. Even EveryThingApplePro replaced his iPhone 7 Plus with the Mi Max and he waited all summer for the iPhone 7 Plus.
+Arkham Knight Yep. I saw that. There are some downsides to it, but there is much more to like than to dislike about it. Plus, the battery is the best I have used in a long time! I get more than 6 hours. I'm going to do a full review of this phone. I haven't done one in a while, and this phone deserves it.
I had this protector for about a year now. I use the Spigen neo hybrid and it does lift the screen protector, it is still useable but there is a noticeable lifting on all 4 corner. Also I would like to add that this protector is NOT crystal clear. There is noticeable rainbow dots on the screen. Hope this helps anyone looking at this protector, I would not recommend it.
now that you have had this protector for some time, how do you feel this screen protector is holding up? I've tried many protectors and it's all the same, they lift up. I heard class ones are the worst. I don't want to wait all day for an install to be on. what do you recommend?
Is it impact prote ction or just scratch and fingerprints? i installed it on my Galaxy S8 and fit perfect no bubbles and can barely notice its there... just dont know if it will protecy it feom a drop...
dear u droid mania your videos are always the best. and you also replied to our comments. thanks for this sir. also i am searching for a best film protector which can also give drop protection. can you tell me any ?
maybe I am a bit late to this... But I do have a question though... Would this protector be alright when using it with the Spigen Tough Armor case ? I currently use a S5 with tempered glass and a Spigen Tough Armor case.. Just great.... Now I was curious would the Sipgen Tough Armor for S7 edge would work with this protector or not? Actually same for the Lensun I have same question
i have some question and meed some opinion on this @U Droid Mania. Actually i realized there is a dust underneath the screen protector after i leave it 12 hours (right on the edge). so i peel some part and remove the dust. after i put it back together there is some bubbles and lines remaining. will it be gone after a few days?
So What is everyone's opinion on the best long term screen protector or tempord glass for the S7edge that is case freindly? or just go without? I like the Unicorn bettle Pro and UAG and Speck candy shell and looking to switch from Otterbox defender that we are using now.
+Loaf Bred thanks for the feedback. I do care. 😉. BTW, I have not found any great protectors for the s6 edge. There is always a compromise. Just depends on what you want to live with.
What type of case do you currently use? There are several available that can provide some extra grip. I will give you a list. Let me check what I have that might be good.
+Theresa Banks this one is film, so it can be replaced pretty easy. I have found the perfect glass protector for this phone. The video will be uploaded later today. Stay tuned.
Nice videos Enin, is that how you say it? anyway, i recently ordered my supcase unicorn beetle pro after viewing yours and many other amazing reviews about it and was wondering if this case was compatible with that? If you still happen to have the case with you, would mind to see so. I would appreciate that, thank you!
+TwinTech Hi, yup, that's how you spell and say it. 😉. I will dig out my Unicorn Beetle Pro and check it out for you. I do still have it. I will have an update early tomorrow.
U Droid Mania I agree 100 percent. I don't mind the back of the Pixel, it's just the front that I really dislike, such unnecessary bezels make it look unfinished to me.
I brought this and followed the instructions, waited 24 hours put my otter box on it and it still has little water under it took case off squeezed it again with the plastic scraper still water under it Uugghhh
question. My galaxy s7 edge has two small cracks in both top corners. should I replace it or just apply this screen protector. message me if you want to see the phone or any other information
Ace with the stinky yiky The cracks will only get worse , especially when putting on and taking off a case. Also when the phone heats up and cools down it will get worse. I would get it fixed as nothing will prevent it from eventually cracking more.
Have you had a chance e to check out the Whitestone protector for the samsung galaxy s7 edge? I know you said g pel screen protector and the supcase, but I'm trying to see if that is still the best protective combination? It's a shame though because I would like to be able to see my phone as I have the gold one and would be nice to have a clear case or a case that would compliment the gold. If you could please take the time to respond that would be greatly appreciated.
i just got the edge 7. i spent days researching it and trying to find a good protector for it. i came to the conclusion that the defender otterbox and a screen protecter were the best options. with my first tempered glass protecter from otterbox, i lost complete sensitivity on my edges and overall the entire phone just not as bad as the edges. i switched to a flimsy one and have no sensitivity but i feel protection is out the window. Also, my otterbox defender's adhesive on the hard shell is sticking to my current screen protector so i cant take it off without lifting the protector. im not really sure what to do. id like to have tempered glass, id feel fo much better, i just dont want to go through this sensitivity bs again.
+Jenn Acid I hear ya. The best protector combo that I have found is the GPEL with the Supcase unicorn beetle pro. There are no touch sensitivity issues and the protector is glass full screen. I had the 2nd edition of the screen protector, but some have been having trouble finding it. This protector is good, but does not offer the same level of protection. I'm finding with the curved displays this is definitely a trade off for the beauty of the phone.
U Droid Mania , you should review the otterbox defender series for the s7 edge. also im curious if it will fit with a tempered glass screen protector? maybe the otterbox alpha protecter
+CACTUS yes, with the unicorn beetle pro there is plenty of room since it covers the phone. That case works with all protectors that I have tried, including the glass ones that I have tested.
+Oscar Villegas Wow sorry to hear that. That's not too high either. For protection I go with the Beetle Pro or OtterBox. I have never really dropped this phone and got any damage yet though.
+groundskeeperwillie I like Shark proof too, but have not been able to get them to send products for my review. I had shark proofed the s7 edge but wanted to test their new version. Maybe one day it will come in the mail. Lol
Why do this screen protector look like when installed like if you had eaten fried chicken and touched the screen , it looks like it's greasy from the inside?
Nice, I just ordered these protectors for my wife's s8+ and my s8actv , and after the scam piece of crap tempered glass protector I got sold on at the tmobile cracked ON DAY ONE, WITHOUT DOING *ANYTHING* !!!!! I will never put those glass protectors on again and by design and laws of physics the film's are more protective anyway, as far as shock goes. The glass is a scam and I hate them with all my soul. Film all day! I wouldn't take the "best" glass screen protectors if someone wanted to give me one, or a thousand, for free, I wouldn't take them to sell, I wouldn't give them away, those bastard companies should be ashamed of themselves selling that crap and some of them are like 40$ a piece!!!
Nice screen protector but I don't bother with them. 3 months with S7 Edge and more than 2 months with my replacement Note7 before that without a screen protector and taking reasonable care, not a scratch or a scuff on my screen. Can't beat using the screen as it's meant to be used. I've been disappointed by far too many, and it turned out to be a Godsend,, as I've realized that, personally, I don't need screen protectors.
+Brian M I hear ya man. With this phone and my Note 7, I found myself wishing for a flat screen. I'm wondering if that will change any at all next year. To your point though, the display does feel nice on its own.
U Droid Mania I can't see it happening with flat screens. I think everything will be curved next year. Lol. I understand some people need a protector if they are living or working in a sandy environment and the curved screen is a pain in the butt. However this glass is much tougher than people imagine. I don't do silly things like putting keys or coins in the same pocket and I'm just generally careful, and with a good case most people will be fine. But, I must say I was impressed by the ease of application of this product and how well it handled most brands of case.
Hey There , i have not seen you do the new improve ZAGG Glass Curve S7 Edge , WOULD LIKE TO SEE YOU DO A PREVIEW ON THIS NEW ONE THAT EVERYONE SAYING IT WORKS WITH NO ISSUES ON ALL CASES HERE'S Link: www.zagg.com/us/en_us/invisibleshield/samsung-galaxy-s7-edge/glass-curve-samsung-galaxy-s7-edge Sorry wasn't yelling at you with Caps!