Hi everybody! We are upgrading "Dwayne the Big Rock" our 3s Big Rock with a Typhon wing and the aluminum center brace. The wing not only looks great, but it protects the rear of the body. The center brace attaches the front and rear shock towers to help resist flexing on those hard landings. The Big Rock has a pretty long chassis, so we thought it would help prevent possible breakage! Plus it looks cool!
Wing Part Numbers:
Arrma wing mount: AR320455
Arrma Outcast wing: AR480006
Arrma Typhon wing: AR480016 - needs slight trimming.
Arrma Kraton wing: AR480012 - needs the holes relocated or to trim the body at the rear like a kraton.
3x16mm button head screws: AR721316
Center Brace Part Numbers:
Arrma center brace mount set: ARA320528
Arrma center brace pins: ARA320529
Arrma center brace rubber dampers: ARA320530
Arrma center brace connectors: ARA320531
Arrma center brace bar 240mm: ARA320532
also needed:
4 - 3x10mm cap screws: AR723310
2 - 2mm nuts for the ends of the center brace pins.
5/64 drill bit - or equivalent metric bit to drill the body mount.
3/32 drill bit - or equivalent metric bit to drill the 2 holes in the shock towers for the 3mm cap screw that locks in the center brace mounts.
2 mm hex driver
2.5 mm hex driver
Pro tip - when you open your screw bags, use scisors to cut just the edge of the bag just below the tag. Put a small slit in the bag just to sneak out the screw or washer and then you can still hang the bags without the leftover screws falling out.
If you are looking just to install the wing, check out the video from #HardcoreRC. He has a great video!
26 мар 2024
