Ask Adam Savage: Origin Story of the Cave

Подписаться 7 млн

Просмотров 200 тыс.

50% 1

In this live stream excerpt Adam answers questions from Tested members Andrew R and Cypherian about finding a dedicated work space (including how he found the cave!) and packing tools for the road. Join this channel to support Tested and get access to perks like asking Adam a question:
/ @tested
Tested Ts, stickers, mugs and more: tested-store.com
Subscribe for more videos (and click the bell for notifications): ru-vid.com_c...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Savage Industries T-shirts: cottonbureau.com/stores/savag...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachter.com
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Thanks for watching!
#AdamSavage

Наука

Опубликовано:

3 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 188

@tested 2 года назад

Join this channel to support Tested and get access to perks like asking Adam a question: ru-vid.com/show-UCiDJtJKMICpb9B1qf7qjEOAjoin

@patrickwatkins7572 2 года назад

Hi Adam, there is some lovely micro 18650 sized soldering irons avaliable, virtually the same size as the battery !! ;-), please dont review it thought, omg if my tooltip was shit !

@grocer3 2 года назад

My favorite episodes are when you do an upgrade to your shop. If we got an entire series on you moving to another shop and reorganizing, that would, in my opinion, be the best content you could make.

@MrVradley 2 года назад

Seeing a Savage relocation whould be amazing

@tested 2 года назад

If it happens, we will cover it!

@danielcarman5957 2 года назад

Pretty sure you just said his nightmare out loud..... Moving house is bad enough.

@Whitpusmc 2 года назад

Get out of CA, sad to say but it will save you $$ in the long run.

@GingrBreadMan 2 года назад

@@tested just curious, still in san francisco or possibly a different area?

@pirate_jacks 2 года назад

when you move the shop, document everything from packing it up to setting up the new shop, would make great content !!!!!!!!

@dpastor6631 2 года назад

That would be cool. Tear down, pack up, clean up, moving, set up at the new location...whenever that happens!

@Milehighsnake98 Год назад

Go a step further...document the shop shopping! But it would be fun to see his thought process on setting up a brand new shop.

@leatherworkstation Год назад

@Milehighsnake98 bit of a privacy nightmare though. Really can't give away his location for multiple reasons, his own safety, his staff's safety. When he moves they need to get months in front with content and then move in the meantime, then the nutters can't put the jigsaw together.

@pirate_jacks Год назад

@leatherworkstation just dont film the outsides?? or vans ect.. its about the workshops filming the old getting packed up and new set up, dont miss out on what will clearly be epic content, 😎

@toddrf4058 2 года назад

I think one of the other concerns is determining what you actually need. Space tends to get filled up. I purposely cut my shop in half in order to force myself to make choices about what I actually use versus what I collect and park as a dedicated dust collection surface. These are not trivial concerns. I just picked up a MIG welder and I had to think seriously about what I needed versus what I wanted based upon space, not dollars available. It’s a good discussion, Adam.

@SeanHodgins 2 года назад

I just got my first workshop that isn't at home, and I am super freaking excited to get it working for me. Also super freaked out! 👍

@chrisfeltner 2 года назад

I would dread having to move his shop but if he does move that would be a video I would enjoy seeing

@mynameiswayne. 2 года назад

*series of videos *we all would enjoy seeing :D

@j3tztbassman123 2 года назад

Facts!!

@peterkelley6344 2 года назад

I would be more concerned about location and equipment privacy during and after the move.

@Zveebo 2 года назад

Definitely something I would be happy to experience vicariously through Adam rather than having to sort it out myself 😅

@DrRusty5 2 года назад

The interesting part will be the lesson learnt and how things are done differently, with storage etc.. Presumably, a new place would be larger, so could be subdivided for dedicated spaces??

@Matt02341 2 года назад

I’ve found moving out of and back into your own space is a great way to get organized and reorganized for current and future updates

@jamesfrancis7025 2 года назад

As an architect it would be a dream project to work with such an enthusiastic and passionate maker as Adam to design a custom cave. Having designed myself a garden studio for model making and housing a model railway it's really rewarding to design spaces for creating.

@lupiaan2021 2 года назад

I rarely comment on your channel, but I just wanted to express how much I appreciate all the information, and knowledge you are passing on from your own experiences, it is GOLD. Thank you Thank you Thank you Thank you...

@andy-in-indy 2 года назад

Adam talking about the marble dust reminds me of weeks trying to remove the orange metal oxide powder from the RCA factory room Cyberia makers pace moved into in 2011. They used to make magnetic tape in that section of the factory.

@WEHJrsCubsAudition 2 года назад

And every time Adam suggests a tool purchase on eBay, the prices jump thru the roof overnight…

@philgarber2611 2 года назад

As a New Yorker, I'd LOVE to hear your Canal Plastic/Rubber tales. The center of NYC making.

@TheStihl211 2 года назад

Just started following the other day, such useful information in every video!

@HaydenLucke 2 года назад

I see you noob 👀

@googiegress7459 2 года назад

I like the things you upload that you're excited about, because when people do and make things they enjoy, the output is higher quality and has a magical feel to it. But I also appreciate the wisdom you share in Q&As like this. Your channel has been wonderful and I've found a lot of value here.

@danmar007 2 года назад

I love that almost-car in the foreground. My sister is an artist, and she's always had studios. It was important for her artistic "liberation".

@kallemustonen 2 года назад

As a visual artist workspace is essential. For first 10 years I had shared spaces. They were great for getting into being so called professional and sharing the enthusiasm. Just after getting my own rented studio I realised how the workshop is part of what comes out of the other end. I love installing new tools and learning how to use them. Adam has been great example that you can do anything if you put enough efford to it. Keep up the good work. Take care of your tools.

@T_Mo271 2 года назад

"Adam's New Shop" would be a great video series.

@filanfyretracker 2 года назад

seems to me the two most important things to getting a shop space is power delivery and ability to add ventilation for any process that might need it. Some processes require the ability to vent outside due to fumes, And of course you want a building that can handle your expected power demands.

@imortalthejustalexthegreat4276 2 года назад

I got to meet Adam Savage once at mega time it was probably the best moment of my life because within the 60 seconds that I got to talk to him I realized that he was just like me except way more awesome lol And like 40 more years of experience

@shannahmiller 2 года назад

I like the point you make about the tools & supplies you take when traveling are dependent on the project. I have had that experience with pottery - when I go to take classes, it's really handy to have a subset of tools to take with me. I was able to refine mine to the point where it fits into a Nomadic PE-07 pen case, as long as I take a compressed sponge. I'd definitely use your method, though, if I was working in a bunch of mediums.

@lburton874 2 года назад

The comment about the dust left we waiting for Adam to say… “and we are still finding marble dust”

@Voirreydirector 2 года назад

How could one tell?

@JudahGoat 2 года назад

Oh man the dust problem is relatable. My boyfriend and I moved our shop into a new building about 6 years ago. The space was a large contract vacuum repair shop before we moved in. We had everything power washed and still will find little mountains of vacuum cleaner dust lurking in corners and cracks.

@idgeek 2 года назад

I TOTALLY agree on having a dedicated studio space. Especially if you do professional jobs. I too worked at home for several years before getting a studio space. Having a off site studio space gives you that "professional" feeling.

@aserta 2 года назад

My first shop was a loan from my aunt, which i used to buy the house next to me. Paid her in full + extra for her troubles in 4 years. Funny thing is, by the time i finished paying, i was already ready to move out to the next place, wound up selling both houses.

@RogueCylon 2 года назад

What do you use your shop for?

@mysongs740 2 года назад

Question: Did you consider earthquakes when you did the setup of your shop?

@stevewalston7089 2 года назад

Unlikely. The entire area is a hot seismic zone

@uncledubpowermetal 2 года назад

You know, you could take credit for all of it, you could say you found the space, you had the hidden knowledge to see that place for it could be. But no, you gave credit to your wife and assistant and im sure many other people. That's good leadership, knowing that you don't know everything and that other people can be useful and helpful. Love it, antithetical to most all living generations

@bubblesculptor 2 года назад

You mentioned building up floor 18-22 inches.. were you able to utilize some of that space below, such as for running electrical or other utilities? Access between various points?

@Vamptonius 2 года назад

I've loved your cave since the first upload I found. Even though my thing is Theoretical Cabinetmaking (not even a carport to work in), that cave is wonderous. If you do move, I hope you set up a couple of time lapse cameras and capture the whole process, just chuck a voice over on it later, if you're of a mind.

@gloriouslyimperfect 2 года назад

Only people who’ve lived in the mission will understand that comment about parking. I chuckled.

@paulmichaud3230 2 года назад

Thank you! My long time running question was answered. "You have a wood floor. How did you put a mill and lathe in there? (and never mention having to bolster the floor)

@davidsharp9166 2 года назад

A video series of the moving process would be amazing

@richardcrane1262 2 года назад

Has Adam ever published any kind of floor plan/layout of various work type areas?

@barryphilrush719 2 года назад

Enjoy your insights on taking Tool's on the Road , I Always take too much !!!!

@blackcatgraphics1483 2 года назад

By the time I finished setting up my first on-set toolbox it was so heavy I felt like I was carrying around a set of barbells. My suggestion would be to make one that's modular, so you can break it down in your production van and just grab the unit that you need, and leave the rest. Of course, if you have the luxury of a big art department, you could probably go minimal like Adam suggested, and share tools when needed.

@markcarico546 2 года назад

Having a separated area for working is such a big deal. A lot of the time if I'm in the house I can find any reason not to go outside and start working (I make and customize lightsabers) but as soon as I'm out there I can't not fiddle with something which always leads to working. Having a place to get your mindset right is so important.

@markcarico546 2 года назад

Also listening to these and the one day builds helps get me in that maker mindset.

@311connorf 2 года назад

Funny thing is my shop was my biggest maker project to date. Built it myself in my backyard from slab to framing to wiring expensive but worth it

@espalier 2 года назад

Seems like the space under the floor could be used for something. Compressor and air lines, dust collector and ductwork.

@fittobefoiled4522 2 года назад

I have a tiny version of that tool at 9:00min, it’s a surgical tool normally used for inserting tubes in kids ears - myringotomy forceps. super useful for fine reaching/grabbing. And I just love saying it’s name!

@ultratorrent 2 года назад

Keeping mobile kits more specific to the job is essential to keeping scale to a sane level. Building out your mobile kit on the fly from your available shop tools is advantageous, but you also need to get an inventory of tools worked up for it to keep track of things. Composite Tool Kits are king, but usually lose a bit in the adaptability. It's a balance to find for sure.

@royreynolds108 2 года назад

I was tasked with cleaning the gypsum out of a locomotive that had lived its life hauling and around gypsum dust. Took me several weeks. Some layers were over 2 inches deep.

@youmayknowmeas2an 2 года назад

You should have used a stick of dynamite like the cement truck myth ;)

@mightygrom 2 года назад

You mentioned not bringing a soldering iron... I was wondering if you've seen the TS100 portable iron? I have one in my kit and it's come in handy many times. The best part is that it can be powered via USB or a lipo battery, so you don't need to drag a lot of other stuff along... perfect for reattaching a wire to a circuit board, or fixing an xt30 connector... and it gets hot enough to do bigger connectors (like XT60's)... and it's not much larger than a mechanical pencil.

@dwoodog 2 года назад

Getting back to the shop. It may seem like no biggie, but my recently acquired shop has a drain in the middle with a sloped floor to direct water to the drain. OMFG the issues it causes with cabinets, table saw, work benches......etc. Everything wobbles a bit. I need to shim everything, what a PITA.

@BROON71 2 года назад

That multi-color area rug that he has over by his podcast table, is super cool. I would love to find one to put in my place..

@paulmichaud3230 2 года назад

This is a piece of leather and the colors are just from typical work bench use.

@BROON71 2 года назад

@@paulmichaud3230 Huh? It's clearly a RUG. You can even see the fringe on the end of it.. LOL

@kosherbacon8087 2 года назад

My maker space that I lease out is 9' wide X 16' long by 20' tall. I was able to built a lofted area with a staircase that I use for hanging things from and old peanut butter jars from under the stair slats filled with this and that. I stumbled into this space because I was managing a workshop in the building at the time and this space was sitting empty being used as storage. Talking to the right people I was able to lease it out. It was not even on the building manifest as a leasable space. Sometimes you just have to ask the right people the right questions to find a space that is right for you.

@imortalthejustalexthegreat4276 2 года назад

I never knew I needed a shop . Now I do.

@seanconlin8712 2 года назад

Adam, I have always have had a house that has had a workshop/maker space. I even had a custom made bench in the shop. I moved to a new house back in 2013 and downsized. I am trying to get my shop back as well as storage. The only space is my garage but I have to come up with an idea for storage shelving/tracking. Tool storage and a work area. it is a single car garage. Can you make any recommendations. I am a generalist maker, wood and leather work. Looking at some furniture refinishing soon.

@GreenJeep1998 2 года назад

I’ve done the triage kit for my plastic models and R/C cars. I have a littler tub that I can fit side cutters, cement, hobby knife, sanding sticks, hand drill and small bits and even a pair of lexan scissor in for model work away from home. I also have a small toolbox specifically for the R/C stuff like tools, nuts, wheel pins, body clips, zip ties, hobby knife, etc, and just in case I’m away from the car that toolbox is in, I also carry the box cutter I bought 18 years ago on me in case so cave to cut string, fishing line, plastic mesh, or even vines from around the wheels of my crawler and trail trucks, since those are always getting tangled up in other people’s garbage. I should bring garbage bags for trash I find doing that, Tread Lightly style, since I’ve picked up garbage and taken it to cans in the park or home to throw out when I’m done.

@Glisern 2 года назад

moving one month build!

@keithbrown2458 2 года назад

Great answers I think the same way only I fly RC airplanes and I do have a kit because well we’re mobile but you bring what you think is needed and you always miss something

@TheZogislost 2 года назад

18-20 inches under the floor could be cool storage space!

@LastManAliveProject 2 года назад

Only bring practical tools. Pulls out huge cartoon mallet!

@DarrenRashJr 2 года назад

Adam, I'm a woodworker that has outgrown my garage. I have the space to build a shop on my property but I'm wondering if I should consider renting industrial space instead. I would really appreciate your thoughts.

@Phoebus20 2 года назад

I know you said it fills with anxiety but thinking about the videos that would come of you moving shop fills me with glee. I'm not saying move, just that if you did I think if would be amazing to watch.

@captain_coleton 2 года назад

If you move out of that office, that is going to be one insane move. Definitely will need to make the new space move in ready so there is no boxes sitting for a long time.

@MichaelEdmond 2 года назад

I am pretty sure the move (if/when it happens) will be more of an epic adventure than all the lord of the ring movies combined!

@rogerwhiting9310 2 года назад

When I watch EVERY video that you make...I ALWAYS wonder if you ever consider moving your family AND your shop to an area that you can have a LOT of space. A place like April Wilkerson bought and is making enormous workspaces so she can do about anything she wants. Wranglestar is another RU-vid star that has all the space in the world...and not be restricted by the megalopolis of San Francisco?

@danielmcfarland393 2 года назад

I have going to get a 3d printer. I have seen video"s on 3d print job's. they said to get a hot gun for the cobwebbing on the print job's. Would a hairdryer work gest as will?

@sfcmp7005 2 года назад

I think the key thing is that it's almost always better to separate your work space from your living space, if this is important. I know during the Covid19 lock down it got really bad working at home because I never went anywhere. That got depressing. So now if at all possible work is separate from home. As someone brought to my attention, this is definitely a personal thing, and I do agree with that. I know everyone is different when it comes to working from home.

@jeffreypowell7374 2 года назад

This is likely a very personal decision. I am headed back to the office next month and would prefer to keep working from home.

@sfcmp7005 2 года назад

@@jeffreypowell7374 you are 100% correct. I agree that it's a personal choice, as everyone is different. Honestly I loved working from home at first. I just kind of grew out of it. But, I know that's not the same for everyone.

@IanTheWoodchuck 2 года назад

All I can say, Adam, is if you DO move the cave, PLEASE do not deprive us of moving VLogs. Often, your insights on things have made me reconsider the way I handle things. Admittedly, there are also things you do that have no bearing on my making and my gut instincts serve me better... Also something I know you endorse. But all that said, we have never seen through Tested or your TV career a case where you need to undertake a moving project like The Cave, and if we can pick up some valuable tidbits along the way, I'm sure we'd all be most appreciative!!

@badtorse 2 года назад

3:34 Adam's sassy assistant is my goal energy

@wodan74 2 года назад

I always wonder how do you keep this clean and dust free? All those objects and machines must be a dust magnet...

@shiraleeana 28 дней назад

Wondering what made you decide against moving now that it’s two years later. Don’t know if it’s come up in subsequent videos.

@jimnunn9232 2 года назад

space under the floor---trap door sheet products storage

@JUMBOpin 2 года назад

Is that a Brunswick Goldcrown IV?

@charlesvaughan7148 Год назад

In the static picture you have a pool table. Who is the maker? I have a similar one in my sort of man cave.

@Mtlmshr 2 года назад

So on that note of shop space, how many Sq ft is your space?

@csimet 2 года назад

I can only imagine what the cost of your house and renting the shop space costs in SF. Oh my god. I'll stay in WNY and visit CA, as I do many times. ;)

@dragonettiification 2 года назад

OMG if you move the building of the new shop infrastructure will be heaven to me.

@pedersenist 2 года назад

There is something funny about that Adam pull out a giant wood hammer.

@driseris7941 2 года назад

nice!

@wermgoesgonzo 2 года назад

One day build - ComicCon triage pack out kit. Or One day build - House hold tool kit? Expand on the first order of Retriveability stuff with travel tool box build outs....? What tool do you think belong in the shop, house, car, travel?

@austinpatrick2682 2 года назад

Move to the east coast!!!

@joshua.snyder 2 года назад

One critical factor to consider in a potential shop location is: available power. Do your homework, and know what your potential needs are. Don't be afraid to pay a little more to get more electrical capacity. Trying to add it later is expensive and often miserable.

@vilstef6988 2 года назад

I like how Jamie recognized the wisdom of of his assistant.

@TrailRat2000 2 года назад

I'm even more impressed with Adam's cave knowing he's got secret storage or "priest holes" under his feet...

@mattkaye3904 2 года назад

Time for a mobile kit case build. Come on man, its time Adam! lol

@micknolen 2 года назад

18"-20" of space? I'm surprised you didn't find a way to use that for storage.

@davidmarden4789 2 года назад

This is what I do when I go to the track I just bring the tools I need to fix the car.

@TheAngryCaptain 2 года назад

Sorry to hear you're having problems with people breaking into your car(s). We in the Florida Keys have had these problems as well and we all work on boats so we can't babysit the parking areas. Here is how most of us solved the problem: take everything of value out of the vehicle and leave the windows down. I know, that sounds weird. But, it works. The window is down so there is no reason to break it and there is nothing of value in the car so there is nothing to steal. People could steal the car, but at least for us the traffic is so bad they won't get anywhere fast and all the police have to do is blockade the bridge and they're not leaving the island.

@florianlindenberger4185 2 года назад

I may have the chance to actually build a workshop of a few hundred square feet, what should i consider? Any tips?

@nubreed13 2 года назад

One thing I will say is make it as tall as possible. The gambrel style roof allows a ton of vertical space. If you can get away with it build one that is 2 stories tall. They sell kits for them at Lowes and home Depot. Having really tall shelves for storing seldom used items has been very helpful for me since I have tools that I do need from time to time but not every day. This will help free up horizontal space for work benches

@ValkyrieTiara 2 года назад

Truly, behind every great man is a great woman (or two) lol Shout outs to your wife and assistant!

@garthor Год назад

San francisco is so expensive, I imagine adam could find much more space if he didn't limit himself to SF... however I'm also positive he would still fill the space to capacity almost immediately... XD

@michaelhazen8658 2 года назад

the biggest barrier for me is cost. I simply cannot get over the idea of spending as much or more than my mortgage per month on a workspace. If it were my main source of income, I could probably justify it. Maybe. The reality is that in this corner of the country it takes "TV Money" to pay for a workspace that suits me.

@nubreed13 2 года назад

That is basically where I am at. I considered renting a space to use as a shop but it would cost more than an apartment so I instead need to buy a house with a decent garage or the space to build one.

@michaelhazen8658 2 года назад

@@nubreed13 Im pretty much in that latter spot. I have a house. I have a space. I have a crusty, ad-hoc built, very old shop. SO much so that not long ago I took bids to have it demolished and replaced - just replacing the structure with a plain box, the exact same dimensions, without any amenities like doors, siding, insulation, electricity, etc was going to cost more than I owe on the entire property. My point is this: Once you account for the costs of home "ownership" - mortgage, upkeep (cash and your time) of your own home plus the cost of renovating or building a workspace, you might find the cost is a wash or tips in favor of renting a space. Unless you move to the middle of nowhere and find a cheap space...

@nubreed13 2 года назад

@@michaelhazen8658 problem is around here shop space is at an absolute premium. All the studio spaces near me are at max capacity.

@stardjandkaraoke 2 года назад

What is the model sitting on the desk? Vehicle and dash?

@edwardrhoades6957 2 года назад

Hero Collector Ecto-1

@philipgard6762 2 года назад

It looks like it would be a major undertaking to move your shop to a new location Adam.

@acopernic 2 года назад

This is where cities should really invest. A better public transport. Changing this will definitely reduce these 'empty' we see across the cities.

@digitaIgorilla 2 года назад

That was better than Wolverine's!

@LManonymous 2 года назад

Good old San Fran, where living good is having your vehicles vandalized at best and wishing that it won't be worse.

@wisco1225 Год назад

The thought of packing alllll of that up. Moving it. And organizing it as you go is a horrible thought

@gesnow 2 года назад

for a Portable Soldering Iron... get a battery powered Hako FX-901.... its fast and it works.... the brand is great, the price is low.... no cord is get in the way... its my goto, and have many Irons.

@nb7466 2 года назад

I cannot imagine how much a shop would cost in SF

@sombojoe 2 года назад

Oh geez, I thought that was his basement!

@danhammond5424 2 года назад

Does anyone wish they would show the photo they use for the thumbnail in the actual video? So many times I just want to look at the photo closer or in better context.