Aspen Plus for Reactor Design and Optimization Intro 

This is quite straightforward even for a layman. Thank you so much

Thank you so much Steve, It is very helpful, even for science background

do you have a tutorial for simulating biogas production using aspen?

Such a video man! THANKS!

100 C gave me a 99.9% conversion, but I have my doubts about the validity and would have to do a deeper dive into experimental data too understand the limits of the reactions better.

Hi Steve..why did you choose equilibrium reactor rather than stoichiometric

Do you know how one could use the information gathered in this exercise to size a reactor?

Getting similar results but I have problem in produced separation and DME purification. Please post a video regarding the same.

Thanks a lot !!

Thanks for this.

I need some examples about "manipulator." Can you please help me?

thank you so much

I used to work on Aspen plus and now open search

Thank you! It is very helpful.

how to put ejector in aspen hysys

It looks better to use aspen simulation work book for case study. And then we can find optimal operating condition for conversion ratio

I tested at feed temperature of 200c and same reactor temperature of 200c as well. I got 96% conversion and 98.9 selectively!! How you explain this?

thank you. was helpful

If I ask, can you write what you said in the video? step by step. I did not understand some of them. i am foreign I want to apply what you say. pleaseee

could I use aspen for liquid phase?

super thank you man.

I was expecting some optimizations

thank you very much , can you please check your email i have some questions

Thank you so much

how to put ejectpr in aspen hysys