Brian from Last Mile shows you how to unbox and assemble an E-Ride Pro SS.
We have built MANY of these bikes and it is highly time consuming. If you are local I would highly recommend having it built before you pick it up. If you have any questions please comment below.
Tools Needed:
Alan Key sizes 3/4/5/6/8mm
2.5 long / round Alan Key
14mm crescent wrench
Needle Nose Pliers
Snips
1/2 inch socket
17mm socket
*Note there are some torque settings in the manual if you are unsure of how to interpret "tight".
Last Mile SF
364 Hayes Street
San Francisco, CA 94102
415-678-5273
Last Mile Marin
821 Franciso Blvd E
San Rafael, CA 94102
415-785-8428
16 сен 2024