@@AnExtrovertPaints Yes, I had planned how I would structure it, but I made the fatal mistake of painting all of the miniatures I had available to be Italians. For now it's on hold, if I have some spare figures (and time) I may come back to it at some point in the future.
@@bebopkirby Thanks, it's relatively straightforward: carefully cut the flag out, loosely fold it in half around the pole (don't harshly crease the edge it needs to wrap), then either faintly wet the inside or else water the PVA down. You don't need too much, it'll just ooze out when you press it together. Fold it together around the pole, then whilst it's still drying I use a spare piece of steel rod and gently form the waves back and forth, using the rod as something to bend the flag round (again avoid harsh folds). It's up you you in what direction you form the folds, but I run mine diagonally and irregularly rather than regularly spaced and perfectly vertical (for example).
Yes that’s right they’re the elite company heads from the Chasseurs a Cheval set. I used them for colpacks on the elite company of a light infantry battalion still yet to get painted.
1/72 is closer to 20mm. Either 1/56 or 1/48 are equivalent to 28mm, as with all discussions of scale it varies a little depending on the manufacturer and sculpts.
For a number of years now I have consistently used the same method - Vallejo Matt Varnish, applied with a brush. I like the finish it provides and it works well at all scales for me.
@@SobotRex One-ish? It sometimes depends on the miniature, I might do another coat or perhaps put another layer on some of the areas I think might be more exposed to wear and tear.
Also I was just wondering how you paint Austrian/Italian uniforms I heard using a yellow ochre base but it be nice to learn from some one who actually paints a lot of them as a unit and not a diorama I dont might be a cool video
There are lots of different ways to go about it, some people find that they prefer certain methods to others. Personally I find it quite time consuming but others really like painting white uniforms! I work up from a mid grey basecoat in a series of layers. I don't actually paint white uniforms white except for the most extreme highlight. I'm going to put together a video on how I went about these Italians, so look out for that as I'll go into how I do the whole process.
You are an exceptionally good painter. So crisp and clean, yet soft transitions. Very complex colors. Lifelike, almost waiting for the models to speak.
You have a very good speaking voice and presentation. The videos are short and to the point. Your painting detail is exquisite, can you please have a painting video where you show how to do faces or details like the patches on the pants (knee area)? Also what brushes do you use and how you care for them. I find keep them into a good point shape is incredibly difficult.
Thank you very much indeed! I certainly intend to create more hobby videos in the future, they’re just particularly time consuming. In the meantime this might of use: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1U0m-NmjVjc.html
Apologies, I don't have it written down anywhere. I could try and put one together but it would be a very long list because of all the different details and because I make minor changes/variations as I go along. I mostly use Vallejo Model Colours, a few Vallejo Game Colours, and a small number of Citadel, Foundry and Scale 75 paints.
They look very good - rather than breaking popsicle sticks in half have you considered Coke bottle tops? They work very well and are easier to pick up! And you might want to try clipping your figures from the sprue with a good pair of side cutters - you will get a much closer and neater cut.
I did consider bottle tops and similar but I like this method, I find it easier to manoeuvre. In terms of clipping I'm not worried about how neat the cut is, it's often fine and if it's not it doesn't matter because I will consume the same amount of time cleaning up the mould lines in any case.
Thank you. I personally don’t and wouldn’t - I prefer to work up from darker than make things darker later. Also blocking in dark colours I find less forgiving. I basically prime almost everything black but I have experimented with grey and brown on occasion.
Thank you. I would certainly like put together a painting walk through for these. It takes me regular hours over a whole week just to paint six without filming so you might have to wait a short while!
White tack. Just be careful removing them if they've been on the stick for a while as many of mine have waiting to be painted. They need a careful twist or similar when removing so you don't damage the miniature.
