Atomrc Dolphin FPV 2-15-24 

Nice dusk flight. It's always enjoyable to watch the lights come alive as the sun goes down. Flying in nice smooth air can feel like you're on a magic carpet.

When u get the chance could you make a video/s going into reviewing airframes and ground station. I have been looking into making an rc plane and I have to say I am impressed by your videos.

Your camera pan setup is great, can you please make a video on that? Thanks!

Amazing flying, Keith! 😃 Stay safe there with your family! 🖖😊

Those motor mounts look a lot like what we use to hang instrument panels in smaller part 23 aircraft (piston poppers singles and twins). The ones I am familiar with are usually 8-32 or 10-32 (not usually larger but occasionally a 12-24 or 1/4-20) with threaded stud on one end and a threaded insert on the other side. The stud is what is affixed to the perimeter frame of the instrument panel and the instrument panel itself is affixed with screws through it and into the inserts molded into the rubber. ... If that is what they are, then they should serve you well for years. The ones I am familiar with are often responsible for insulating an entire instrument panels' delicate instruments from engine- and runway/taxiway-induced vibration, to include absorbing shock from hard landings. I've see as few as 4, but usually 6 to 8, used to support an entire stuffed instrument panel full of old electromechanical or vacuum driven instruments - read that as 'heavy af' - ranging anywhere from 5 to 20 # of shite. I strongly suspect that the torsion and tension loads imputed by a little electric motor with a prop thereon, being affixed using 4 of those mounts, is well below what those are rated for. Thank you for pointing this out. That is on my list of things to consider on future builds. :muscle:

Great flight and video! Very cool.

Is there a way to install servos in the v-tail for yaw authority?

love your videos! I have a question. My dolphin roll axis is really bad and shaky. Any tips for better stable roll in normal cruise flight? PID, mechanical setups...? Thanksss

Are twin engines usually more efficient or single engines more efficient considering you have to power another motor with twin engines?

Hey bonafide, finally got my Dolphin flying and tuned this weekend and dammit I wish I would have done this sooner as it fly's amazing. I am thinking of switching over from Vista to WS. Do you think the dual antenna HD version has better range/reception than the single antenna HD version?

Guessing a Lion, what S and mah? I'm going to try flying slower when I get a chance to. I get about 5 minutes form a 1500 lipo XD

What are the two voltages top left?

Love the vid but what cam did you say you used because i looked up the off snow pro camera but couldn’t find anything

Which version of Arduplane is this, it seems to have more OSD options as compared to the standard Arduplane

What battery do you use when doing longer flights?

How do you manage to get good gps sats with walksnail system? What vtx did youruse?

Hello friend, what motor and propeller use? 3s? Thanks!

What r u running for vx? Is that the dji o3?

How does one control this? Which protocol? Could one fly this with, say, a Radiomaster Boxer, for instance? 😅

Why are you using Dragonlink still vs ELRS? The ELRS system is so much lighter…

that nearby strobing light is probably an LED flood light with a faulty driver. they often pulse or cycle like that