Audi Q3 2013 squib repair snapped clock spring 

Great video mate. Have done this yesterday myself. Quick note for anyone who would consider doing this. You don’t need to disassemble whole thing top cover is clipped in once removed you will have full access to ribbon cable. To clean the ribbon cable i have used soldering iron, do not use direct fire as ribbon cable will shrink. Before soldering pierce 3 holes through plastic part and reinstall small white plastic for one this will hold ribbon cable in place for soldering second it removes tension from soldered areas when reinstalled.

Great video, thanks for uploading, a common issue it seems. Hopefully once repaired it won’t happen again!

Also what bit is used for the nut holding the steering wheel on ?

How do you get the plastic trim pieces off on the top and bottom of the steering column?

Hi mate. What do you charge to do a squib repair?

Thank you very much for a video that helped me a lot

Hi, I have a 2011 A1 with the same issue except the horn still works. Would be able to repair this for me if I send it to you? Cheers. Danny

Thank you very much for the video, you helped me a lot, I did the unpacking and assembly exactly according to the explanations, thank you

Hey mate, so when soldering the ribbon cable, do you get the tiny wires out of the ribbon and solder it together or you just align it and solder on top. Cheers

👍👍👍👍👍👍👍

Hi first of all thanks for making this video, second do you offer a repair service at all? 🙏

Thanks for the video! What temperature did you use to solder it? And what kind of welder rod did you use please? Thanks!

Nice clear video. will it need re-coding, or just faults codes erasing ?

I have a question once the clock spring is broken can you remove the steering wheel airbag clips then after disconnect the battery. Or the airbag might come on?

Hi. Did you turn off the battery when you removed the airbag?

Hello mate

Is this a 2013 Audi or a later model? My wife had a 2018 Q3 and it looks very similar. I just ordered a replacement clock spring

Guy,where can I get you ? My car has exactly the same problem ....no hooter and the steering buttons aren't working 😢

Can someone help me please I have changed my squib on my VW Passat programmed it in. airbag lights gone off but still have no horn or steering wheel controls can someone help me please..

p̳r̳o̳m̳o̳s̳m̳ 😈