Тёмный

Audi S-Line Leather Interior Retrofit - A4 B8.5 quattro - Part 2 

Подписаться
Просмотров 9 тыс.
% 133

Retrofitting my Audi A4 B8.5 quattro Avant with some very nice leather seats!!! Part 2!!!
-Instagram: ispwcars
-Email: ispwcars@gmail.com
Music Credits:
Credits for this incredible track go to Joakim Karud - Rock Angel
ᕗ www.joakimkarud.com/
ᕗ soundcloud.com/joakimkarud
JoakimKarud

Авто/Мото

Опубликовано:

 

15 окт 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 64   
@orlandobaiatu1073
@orlandobaiatu1073 3 года назад
Here for the next one ! 👍👍
@istillplaywithcars
@istillplaywithcars 3 года назад
I’m editing it right now! 😂👍🏻
@rinusheemskerk
@rinusheemskerk 3 года назад
Nice job
@istillplaywithcars
@istillplaywithcars 3 года назад
Thank you! 🙏
@l.razvan
@l.razvan Год назад
Foarte multa munca, felicitari! Ai idee daca interiorul de pe A8 D4 se potriveste pe A6 c7 ?
@istillplaywithcars
@istillplaywithcars Год назад
Multumesc! Sincer nu am nicio idee. 😁🤷‍♂️
@iainarmstrong6248
@iainarmstrong6248 2 года назад
Great job 👏 was the airbag swap straightforward?
@istillplaywithcars
@istillplaywithcars 2 года назад
Thank you! Yes, it was really easy to exchange the airbag. No adaptation needed. Plug&play 👍
@iainarmstrong6248
@iainarmstrong6248 2 года назад
@@istillplaywithcars Awesome! Did you take the seat apart at the back?
@istillplaywithcars
@istillplaywithcars 2 года назад
Yes, you can see it in the video part 2.
@iainarmstrong6248
@iainarmstrong6248 2 года назад
@@istillplaywithcars Legend thanks!
@istillplaywithcars
@istillplaywithcars 2 года назад
Good luck! 👍🙏
@CosminDeac-s9x
@CosminDeac-s9x 10 месяцев назад
Salutare, Am cumpărat și eu un interior SLINE de pe o berlina RHD și vreau sa îl montez și eu pe LHD tot berlina. Voi avea aceleași probleme și încerc sa ma hotărăsc cum voi proceda. Ma poți ajuta cu niște răspunsuri ? 1. De ce nu ar avea ambele saune senzor de greutate, doar centura suna pentru ambele scaune? 2. Dacă hotărâsc sa tai mufa de airbag, trebuie sa o adaug firul la mufa veche prin lipire sau merge o românească cu banda izolatoare ? Nu cred ca voi muta senzorul de greutate mi se pare excesiv de dificil.
@istillplaywithcars
@istillplaywithcars 10 месяцев назад
Salut! 1. Scaunul soferului nu are senzor de greutate pentru ca daca masina e condusa e implicit inteles ca cineva sta pe scaunul soferului, deci soferul, deci sa pui un senzor acolo e redundant. 2. Recomand lipire cu cositor si manta ce se strange, vorbim totusi de un sistem de siguranta si ar trebui sa te poti baza pe el. Legat de senzorul de greutate, frica mea a fost ca daca nu pun senzorul la pasager exista riscul sa nu sara airbag-ul. Nu am gasit un raspuns clar asa ca am decis sa il mut. Tu decizi, in orice caz spor la treaba! 😁👍
@adventuresindiving7451
@adventuresindiving7451 7 месяцев назад
Awesome video. I have a question, i`m thinking of doing the same but my a5 is a 2013 i have sline seats already which are manual only but has lumbar control but are heated tho. I want to put fully electric in as i had them in my 2008 a5. i`m guessing this could be just plug n play without needing to be coded etc? Any help and advise is much appreciated. Cheers Mark
@istillplaywithcars
@istillplaywithcars 7 месяцев назад
Thank you!! 🙏 I don’t know for sure, but I think that it was discussed on some forums that is not just plug&play. Sorry I can’t help, I’ve never done that retrofit you need.
@danielherbert2527
@danielherbert2527 3 года назад
Where the original cloth seats heated or did you have to retrofit the heating in the climate control unit?
@istillplaywithcars
@istillplaywithcars 3 года назад
They were heated also. No retrofit on heating was needed.
@eXxtrazZz
@eXxtrazZz 2 года назад
so lumbar support worked without any modification? just fitted some seats to a3 8p with lumbar support, tho doesn't seem to be working
@istillplaywithcars
@istillplaywithcars 2 года назад
My old seats also had lombar support. 👍
@leonardstoian7
@leonardstoian7 3 года назад
Salut. Interesantă filmarea. Problema mea a fost ca pe un audi A4 b8, scaunele de la audi A5 , cele de pe fata la șocuri sau frâne bruște le am putut observa direct ca au un efect de “rocking “ din cauza mecanismului de acces in spate pe care îl au scaunele. O alta problema ar fi fost bancheta din spate. Ea se potrivește. Însă nu perfect. Lateralele de la șezut, la bancheta din spate, cel puțin la mine, nu s-a potrivit. Bancheta fiind mai mică decât cea originala pe care o am. Efectiv, cred ca lateralele la A5 deoarece nu are usa de acces in spate vine o ideeie mai in interior. Așa ca am renunțat și le am pus pe cele originale înapoi. Efortul, timpul, greutatea.... e un proces istovitor. Așa ca BRAVO.
@istillplaywithcars
@istillplaywithcars 3 года назад
Multumesc de feedback! Sa stii ca eu nu am avut probleme cu ele dupa montaj, iar totul s-a potrivit perfect. Adica nu am observat nicio diferenta da forma la sezutul de bancheta. Iar la spatar eu am folosit doar pielea si buretele, cadrul de metal a ramas al meu pentru ca am avut avant. 😁👍 E adevarat ca a fost multa munca, dar mi-a facut placere. Putin comic a fost ca atunci cand am vandut masina, cumparatorul mi-a spus ca el prefera sa fie interior de textil 😂🤦‍♂️
@istillplaywithcars
@istillplaywithcars 3 года назад
Acum mi-am dat seama ca tu ai pus scaune de A5 coupe. Asa este, acelea nu se potrivesc pe A4. Eu am pus scaune de A5 sportback (5 usi cu 5 locuri). 🙂
@tonyz_yt
@tonyz_yt 3 года назад
where can buy this leather for normal seats audi a5 b8 ?
@istillplaywithcars
@istillplaywithcars 3 года назад
Hi! I think the best option is to look for used seats. If you have ebay or other platforms where people sell their items. There are also shops where they can custom make the leather covers for the seats, but I think it will be more expensive and also lower quality. 👍
@EvoGTR33
@EvoGTR33 2 месяца назад
Eu pe avant nu am chestile alea pe spatar , pot sa pun interiorul direct ? Fara sa schimb cum ai facut tu Tot de pe a5 vreau sa le iau
@istillplaywithcars
@istillplaywithcars 2 месяца назад
Da, daca nu te intereseaza partea din spate a spatarului atunci merge sa le muti direct.
@eduardogomezramos6261
@eduardogomezramos6261 3 года назад
Nice. Likes
@istillplaywithcars
@istillplaywithcars 3 года назад
Thank you!!!👍🏻
@kristofferbiel9066
@kristofferbiel9066 3 года назад
I am planning the same build, the front seats i bought is with electric Seat adjust, Any tips on how to g’et that working?
@istillplaywithcars
@istillplaywithcars 3 года назад
I’m not sure, but I understood that if you already had electric lombar support you can use the same source, but you need to upgrade the fuse with a higher A one... 👍🏻
@kristofferbiel9066
@kristofferbiel9066 3 года назад
@@istillplaywithcars My car doesnt have Electric seats now, but it has heated seats
@istillplaywithcars
@istillplaywithcars 3 года назад
Than I think you have to replicate the oem wirering harness. A little more work, but nothing is impossible. 👍
@Δημητρης-δ3θ
@Δημητρης-δ3θ 2 года назад
My friend I retrofit the same seats for my coupe.wires fuses all plug and play.but I have now airbag on!if you have any idea.I didn’t have the key on ignition when installed.did I had to place the ecu of the previous seats to the new seats?
@istillplaywithcars
@istillplaywithcars 2 года назад
Hi. My sear had no control unit. So if you the airbag connector is clipped properly it should be no issue. Try to erase the code, if it comes again it means there is an error with the harness. Maybe the connector is bad.
@Δημητρης-δ3θ
@Δημητρης-δ3θ 2 года назад
@@istillplaywithcars appreciate it
@istillplaywithcars
@istillplaywithcars 2 года назад
No problem. 👍 I hope you can work it out. Good luck!
@Δημητρης-δ3θ
@Δημητρης-δ3θ 2 года назад
@@istillplaywithcars thanks I try to erase code
@sujanbhai51
@sujanbhai51 2 года назад
Were you get this
@istillplaywithcars
@istillplaywithcars 2 года назад
Hi! The seats? Bought them used. Or?
@nemanjalekic7543
@nemanjalekic7543 2 года назад
Hi. I have similar problem. I upgrade classic seats with s line seats for audi a4. And guess what, those were also from uk. And now have the same problem with airbag conector. Is there a chance to buy new conectors or i have to do same thing with airbags? And i have another problem, old seats doesn’t have lumbar suport..:-/
@istillplaywithcars
@istillplaywithcars 2 года назад
So for the airbags, you can remove the connector only by cuting the wires. If you still have the old seats I recommend you swap the airbags. Not sure if they have same shape/fixation, but you can check. Regarding lombar support, you need to bring voltage to the seat. Look for some oem harnesses, or bring new wires from the fuse box.
@jonathanlamm8414
@jonathanlamm8414 2 года назад
@@istillplaywithcars so I've finally found my leather sports seats in Germany to replace my standard cloth seats. This has the advantage that they are LHD seats going in my LHD car, so no swapping of the seat occupancy sensor, but the new seats are pre-facelift and my car is facelift. I'm thinking of cutting the airbag cables and soldering the facelift airbag plug onto the non-facelift seat airbags. Any reason not to do this? It seems like a much easier option than swapping the airbags, which may or may not be the same, or am I missing something here? The airbags don't have component protection, right?
@istillplaywithcars
@istillplaywithcars 2 года назад
Hi! Airbags don’t have CP, you are right. I would still choose the complete airbag replacement just because it’s a safety topic, I would like my airbag to deploy if needed. 😅 But I’ve seen plenty of people modifying airbag harness by cutting and soldering, so I think it can work just fine. 👍
@jonathanlamm8414
@jonathanlamm8414 2 года назад
@@istillplaywithcars ah, I see. I am more confident about my soldering skills than I am about my seat deconstruction and reconstruction skills, so will try the wiring change method :)
@istillplaywithcars
@istillplaywithcars 2 года назад
😂 ok. Good luck! I’m sure you will manage it.
@adrianpreda87
@adrianpreda87 3 года назад
Le dai pe cele vechi?
@istillplaywithcars
@istillplaywithcars 3 года назад
Salut! Le-am dat deja. 😁
@istillplaywithcars
@istillplaywithcars Год назад
Daca te referi la cele pe care le-am dat jos, le-am vandut cu 1100 sau 1200 lei, nu mai stiu exact. Fara fete de usi.
@Revyver
@Revyver 3 года назад
Scaunele erau de Anglia ?
@istillplaywithcars
@istillplaywithcars 3 года назад
Da
@Revyver
@Revyver 3 года назад
@@istillplaywithcars cum ai procedat cu senzorul de presiune sau cantarul ce vine invers fata de cele de Europa, din filmare observ că îl desfaci, l-ai scos și schimbat cu celălalt scaun? Mersi frumos
@istillplaywithcars
@istillplaywithcars 3 года назад
Am schimbat buretii intre ei cu tot cu senzor si si incalzirea in scaune. Daca il desfaceam riscam sa il rup. Vezi in partea 1 din retrofit.
@Revyver
@Revyver 3 года назад
@@istillplaywithcars ai schimbat buretele de pe dreapta cu cel de pe stânga că sa schimbi locul la senzorul de presiune. Ok 👍 După operațiune s-a aliniat totul și sta bine tot ce ai desfăcut ? Unde vin și eu să mă ajuți 😁🤗🍻
@istillplaywithcars
@istillplaywithcars 3 года назад
Totul s-a aliniat perfect. Nu am rupt nimic, nu am pierdut nicio functionalitate. Trebuie doar sa fii atent cand muti buretele, sa muti si o parte din cabluri ca sunt diferite stanga dreapta. Dar e totul plug and play. Ar fi bine sa iti faci poze cu partea de sub scaun inainte sa desfaci, sa vezi pe unde sa tragi cablurile sa fie OEM. Legat de ajutor, eu sunt din Timisoara, dar stau prost cu timpul si nu cred ca pot sa te ajut cu mai mult decat sfaturi. 😞