Auto glass milwaukee multi tool . Windshield Cut Out Tool 

I’m sold on the multi tool now thanks!!

I use the wire to take out the windows this looks like a tool i should use. thanks for the info

FYI oscillating multitool "universal adapters" are available from several manufacturers for less then $10. They may center the blade you are using better and hold it down tighter then that fender washer you are using (assuming that the blade you're using is actually meant to be mounted on an oscillating tool in the first place). I have tried the Bosch and Dremel adapters and they both work well. More recently, attachment manufacturers began offering their blades and accessories with an integral "universal" fit.

Never seen YT video that contains so much information on a super rare details on proper part numbers for washers and other misc. The parts needed along withe modifications to make to the sealing communion on generalizing the low but stable meeting, VERY informative video my dad woulds love the videos You post. I already liked, subscribed and shared your videos. Thank you for posting and education . I can I large window ever be repaired and then reinstated? F there was one major removal l tool, to remove the front windshield that had a large window like in it like a 2006 jeep grand Cherokee what tool would you recommend? What brand of glass would you use? OEM third party? Thank you again your videos are very entertaining and very easy to understand.

Get rid of the music and let's see the damn tool work lol

After 20 years in the glass buisness I tried one for a couple of days after spending almost $900 on one , vibration is a huge problem , inexperienced glass guys can do a lot of damage if they are not careful , and a sharp cold knife works faster and cheaper , it's in the garage if anyone wants to buy it ? . Haven't used it since.

Need a close up of how to insert and start the cut

This guy loves putting washers on his tools...lol

Had to use 3/4 blade and it is long enough, now can't keep the blade from turning as I start to cut. So now going to get the abd washer, hopefully that will hold blade in place as I cut.

did you crack the windshield

Is the washer a ABD OR AVD?

Why not just a cold knife blade?you can convert the fien multimaster to accept those blades with a 99 cent adapter and save 900 dollars.thanks for the video.

Nice video, but you need to make more detailed and well-explained video showing how to use the tool and other important tools as well.

How well does it work when a windshield does not have a molding does it scratch the body

I have the multitool. I purchased the 5200 blades from equalizer but they do not fit. Does anyone know what adapter I need for the milwaukee or aftermarket one. Thanks

Got the Equalizer 5200 blades and put on Milwaukee multi tool, tried cutting out glass and the blades are too short need longer L shape blades to work on this one.

Cold knife all day long!!!!!

His he cut the bottom out ?

Milwaukee Hackzall m12 spade bit could it be used to remove the back windshield? What tool do you recommend?

I switched to Dewalt for a multitool after my second Milwaukee multitool crapped out because the battery vibrates too much until the contacts are shredded. I'm a Milwaukee tool guy, otherwise. I noticed that you have your battery connection taped too. LOL

I found that the m12 multitool vibrates way too much doesnt have a light. M18 multitool is much smoother operating and is the same price

ЛАЙК ОТ ДРУЗЕЙ ИЗ МОСКВЫ 👍👌👍

Bad camera man too far away

Can you cut a good windshield out without or you just use it to cut the bad windshield

Do not buy that multitool. The older multitools from mill-whacky SUCK...

привет! подскажи, знаком с инструмент для автостекла FEIN? стоит его покупать??!!!!

I think the ZipKnife is the best.

молодец,шикарно работаешь!

What was the replacement shaft you used to replace the one that came with it

I didn't understand the part about your multi purpose attachment broke and urethane fix, do you urethane an unbroken attachment too?

What speed setting do you use the Milwaukee tool on? My Milwaukee has 0-12 speed setting , what is best for cutting windshields out? I want to get a windscreen from a scrap yard, so don't want to break it when cutting it out. What speed setting is best?

Hey can we use Dewalt XR 20v for this ?

Can you use a regular cold knife blade with this? My blades don't have that night loop like your blade just a small hole

Hey I looked at the equalizer website the 5200 and I couldn't find the blade should I just buy the starter pack of blades 99 bucks?

WHEN BUYING THIS TOOL DOES IT COME WITH BATTERY AND CHARGER FOR FREE ?

Donde compras la herramienta mi amigo

How does that tool work under a heavy load if you got into a tight spot maybe like a newer dodge slider

Where did you buy those blades

What's the equalizer blade part #? Thanks!

What part of nj you from ? North?

Профессионально!!! А фуры-камионы-TIR ,Шамиль миняете ?

What about scratching?...do you have to use a lot of primer...

well that was a waist of 4 minutes of my time thought i was gonna get to see it cutting guess not

Where did you get the blade at that I want to know

What the bolt size???

Harbor freight has that tool for a fraction of the cost.

wow those birds in the background so anoying

What is the Milwaukee tool model number??

Links?

الله

M12 is for the kids lol

اناعملت زىه