AutocAD 2D Practice Drawing / Exercise 3 / Basic & Advance Tutorial 

KHALID MAX CAD Welcome

Pitch circle diameter

Your are the true viewer .. Its both ideas you can manage as you like & simple

@@anketkamtekar ok thanks you dr.

Escape the command . Once press F12 ( function key) Then try again.. must check when you select first for any command move the cursor and see angle length block is visible with cursor

Press L enter @length

Ctrl+p In the Printer/Plotter section, select a printer from the Name drop-down list. If in doubt, the Default Windows System Printer usually works. In the Paper Size section, use the drop-down list to select a paper size that’s loaded in the printer or plotter. Anything Letter size (81/2 x 11 inches) [A4 (210 x 297mm)] or larger works for this example. In the Plot Area section, select Limits from the What to Plot drop-down list. This is the entire drawing area. In the Plot Offset section, select the Center the Plot check box. Alternatively, you can specify offsets of 0 or other amounts to position the plot at a specific location on the paper. In the Plot Scale section, deselect the Fit to Paper check box and choose 1:10 from the Scale drop-down list. The 1:10 option is the scale that’s used to set up the drawing. You receive no prize for guessing the metric equivalent of 1:10. In the Plot Style Table (Pen Assignments) section, click the drop-down list and choose monochrome.ctb. The monochrome.ctb plot style table ensures that all lines appear in solid black rather than as different colors or weird shades of gray. Click Yes when the question dialog box appears, asking Assign This Plot Style Table to All Layouts? You can leave the remaining settings at their default values.

Check my channel on how to plot & print for easy printing both on A3 & A4

Mentioned in diagram 129°

@@anketkamtekar yes bro but if someone give a solid part to me then how I would find a radius

You talking about Which radius ???

Sorry bro I wanted to write degree

Ok.. If you. Notice this diagram this degree start from left side at 180° ( according AutoCAD Degrees counting) Vertically straight 90° Horizontally straight 0° So 180°-129° = 51° You need to draw this line 51° form horizontally straight 0°

Pitch circle diameter

soma sundram You can send me via mail... Kamtekaranket@gmail.com

Check you enter value is Radius Or Diameter of the circle....

Please tell me how to solve this problem

@@TheRisingSun-INDIA In circle command type unit value as Radius ..if you have to enter diameter value .. so type D for Diameter Press enter key out diameter value

@@TheRisingSun-INDIA ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VAUSlYvYyMo.html

This Drawing without Dimensions...you will give dimensions with your created dimension style..