AUTOCAD 3D HOUSE | MAKING 3D DOORS 

You're the man Sir! Thank you for sharing your knowledge. I've learned a lot and kept on replaying from time to time to be familiar with the techniques you used. Especially those shortcuts. Please don't get tired of what you are doing now. You have helped a lot of people in so many ways. A real essence of a great instructor!

this so wonderful,,thank you,may you lead me on how to draw 3d roofs

Sir, Thanks for your videos. It's very clear and easy to follows...more power to you.

Subscribed, I'm learning AutoCAD now because I'm new to it. :D

why does my polyline can't drag upward to the direction of the door? it remains in the bottom plane?

Sir your explanation of AutoCAD is super

I am planning to upload . Please wait for it

it's very helpful for me thank u so much

wow the way that you make this tutorial so easy & so good , learning a lottt from this , great work sir , thanks a lottt , waiting for more lessons please .

I learned frm u a lot. Can u teach us until complete door ? Now I have followed ur instruction but my door is stop as halfway only. :( Thanks!

So i make the door frame and it wont offset unless one of the vertical portions is a crooked line. Once i join the poly lines and use the extrude commands when switching to shaded or any other view the frame is see through. I am trying to complete this by tomorrow for a autocad beginners project but i doubt I will get too far and I am afraid I will have nothing to turn in. Thanks for any help you can assist me with.

I can't draw a polyline vertically and my friend can draw this in his lap but he can't offset that polyline. Kindly advise me in this issues.

Excellent Tutorial, I wish you were my cad tutor. Can I just ask if i want to create an interior sectional perspective of a single room is it best to draw in auto cad in 3D then import into studio max to render or is it better to import a 2d autocad file then extrude the walls in studio max?

When I tried to join the polylines, I got an error saying " 1 was not parallel to the UCS". So I used "flatten" command to make them work join, but they became to 2D objects right after. How should I approach this problem?

Hello....first...thanks for this lessons......i have problem with pline command.......when i want to draw pline for some objects....my line is like big large stripe.....why is it working like that????

where is the part in which part of the door is designed through 3dmax please?

There is no use of ucs icon I have to change all time Can u give suggestion?? Wht should I do

Sir, I have a problem. When i try to draw a poly line for the door, the line is not getting drawn on the edges of the door..i dont knw what to do? I tried drawing individual lines and joining them but they are also not getting joined..please help!!

it is difficult to offset how can i give side while offsetting ? i notice there is directions on cross air how can i get that

sir I was having a problem tracing the polyline in the door. first i thought it was just with the ucs. so, I change the orientation of the ucs same to yours. but as i was tracing the door it wont snap to the endpoint of the z axis. can you help please?. or is it a graphic problem of my computer? please help sir I cant continue with ur tut with this problem. thanks. sorry for the bad english

excellent, how to change width and high of that finished 3d doors in a most simple way?

sir i can't make the door when i try to join the various lines in pedit it shoows 1 is not parallel to ucs and 1 is on fixed layer. Please help me sir if it didn't work then i can't extrude it and i will be stucked

Dear Sabeer. Thanks for your reply, it worked beautifully. Now everything is ok however what about sliding windows and double leaf doors. How to design them

In tracing the outline of the door what command did you use it is poly line or 3d polyline? I cant use polyline because it wont elevate but when I use 3d polyline the object cannot be offset. ?

Sir, Again I am confused that how can select the plane in which I want to crate the profile.

thanks for the upload,sir what ucs you use

I did not understood that how you make the door how you make the polyline on the door's periphery, Was it PLINE or 3D PLINE i got confused.

sir, in this video, i did not understood how to remove the polyline below the door

hello sir plz tell me how i can print out jpg files or pdf files autocad 3d modeling.. .

1st part please...

the line i drawn is in air it is not attaching to the door

sir i'am un educated gay but i intrest to lern auto cad! how i can find the first step from your canal ( tutorial class) ? now I'am droning with sketch up (mac software ) i have auto cad 2013 mac vergin pleas help me sir

I'm learning AutoCAD now

hello sir ,i m not able to draw horrizontal 3d surfaces with extrude and presspull command,when i try it goes in upward direction (3d surfaces) pls sir help me

hi sir, How UCS icon i sticking with courser please ?

excellent

sir please upload how to design 3d door in 3ds max

what is the ucs settings for this door plan??

i cant draw door using polyline in 3d view!!!the line i draw coming on the floor of the house

nice

saras!

Extremely disappointed. Wich door you create that does not adjust on the title photo.

thank you

awesome!

YOUR LESSONTRANSLATE IN FRANCH PLEASE SIR

great!

cool!

🖒

thankyou

Nice English thnx

development..............................

door frame design you should not said in that video

isomatik drawing

hi

nice